Gianni Industries TS-980 User Manual
TS-980 Tag Simulator
Specifications
Unit size : 120 L x 54Wx38Hmm
Weight : 180 g
Operating distance : less than 60 mm
Battery:PP3-9V
Application
Statement
The Tag Simulator is an extremely simple "Programming
Device" that allows adding and deleting proximity card/tag
numbers from the reader memory (For Easiprox series standÂalone proximity reader) when the tag is lost or not available.
One Tag Simulator can be utilized at different sites - but for
security reasons it will operate only in conjunction with the
Master Tag.
Send information
Modulate 0 to 9
Skip over next digit
Power on/off
For example delete card ABA form codes " " from
Easiprox
Present the MASTER TAG twice to the reader
(The unit is now in TAG DELETE mode)
Press
Press
proximity reader.
(Continuing)Display Press
Press
Read the Master Tag twice(on Reader)Easiprox
Completed
Operating distance
less than 6 cm
0001206932
Red LED flashing
(Repeat)
0001206932 00018,27284
ABA form codes
Wiegand-32bits format codes
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-TS-980 Ver.D Published on 2008.07.29
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...