Gianni Industries TLM-100MST, GH-803-110J-BG, SM1228, PSM-S1A12V, TLM-200 User Manual

...

Useful Gadgets

GH-803-110J-BG

Power Consumption Switch

Direct use of card (ISO Card Specification) can be installed in the rooms main electrical switch, a 20 sec. Gap after card take out, ensures that the customer room is safe.

Size: 87(L) x87(W) 12(D)mm (Using Standard Euro profile) Operation Power: 100~120V; 50Hz Electric Current: 15A Ambient Humidity: 20% to 95% (Without corrosive

Door Status Indicator

ILM-200

Interlock Module

PUSH2LOCK2-+

INPUT

PUSH1LOCK

73mm

REED2REED

63mm

Interlocking relay module is an implement for two doors egress controlling, simply for fail-safe version electrified locking devices which come with signal output to integrate lock 1 and lock 2alternately from

Case Size: 73 (L)x 63 (W)mm Relay rated 3A@125Vac, 24Vdc 12~24VDC power input, input equivalent to Output voltage. Operating Temper.: -20~+70ºC Humidity: 0~95% non-condensign.

SM1224-1A

Power Transformer Module

TLM-200TLM-100MST

TLM-200 is British Standard electrical box faceplate with red/green LED light, showing monitoring status.

(Such as: door, lock etc.....)

Power Input: 12~24Vdc Current: 40mA@12Vdc, 70mA@24Vdc

PSM-S1A12V

Waterproof Switching Module

I/P AC12V~28V OR DC12V~DC50V

：

O/P:DC12V 1A Efficiency:70% Ripply:Less Than 36mV (DC Input)

Less Than 200mV(AC Input) Line Regulations:3% Load Regulations:3% Dimensions:(L)70, (W)40, (D)20 mm Weight:110 grams net each

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678 Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876

E-Mail: info@gianni.com.tw Website: gianni.tw

Mini Voltage Switching Module Power Input : 15~24VAC or 16~28VDC Output : 12VDC, 300mA Dimensions : 51(L)*40(W)*15(D)mm

SM1228

Power Transformer Module

12 VDC input

13-28 VDC input

SM1228 Power Transformer Modules an easy applicable control module for 13-28VDC ranging input auto convert to 12VDC voltage output great deal of real profitable.

Power Transformer Module Power Input: 13~28VDC Output: 12VDC, 300mA Size: 51(L)x40(W)x15(D)mm

Warranty

The product is warranted against defects in material and workmanship while used in normal service for a period of 1 year from the date of sale to the original customer. The GEM policy is one of continual development and improvement; therefore GEM reserves the right to change specifications without notice.

The products are manufactured under an ISO 9001 QC 080000 Certified Quality

Management Program environment back its product quality, performance and commitment to customersatisfaction.

DBR-200

Relay Board

The DBR-200 Relay module is worked when power input then contacts will change over from N/C (Normally Close) to N/O (Normally Open)

Power Input: 8~30VAC or 11~30VDC Current: 45mA @ 12VDC Relay Output: Relay rated:

5A @ 24VAC, 5A@30VDC

ABD-110

Timer Board

Useful Gadgets

The ABD-110 timer allows for timed or latched functions of the relay. In timer mode, the unit can in a x1 mode, (the timer is set between 1 and 60 seconds.) Or a x10 mode (the timer is set between 10 and 600 seconds.) In latch mode, the timer does not apply, and the relay will remain energized unit a short is applied between the reset terminals.

GPD-3015

Voltage Distribution Board

DC voltage averagely distributed to five output contacts, each with PPTC re-settable fuse protection based on the dynamic equilibrium of energy. Each OUTPUT is protected by individual PPTC from over current; therefore each load of output may not exceed 1AMP.