Gianni Industries PH-300, PH-600 User Manual
Features
Hidden-Magnet design
High reliability
Fail- safe operation Power to Lock
Five years warranty.
Anodized aluminum housing.
MOV provides spike and surge protection.
Adjustable mounting plate for easy installation.
Dual voltage 12 or 24 VDC (selectable).
Anti-Residual magnetism designed.
().
PH-300 series
Mini Electromagnetic Lock
Dimension
PH-600
88.7
2500
2491
Unit: mm
42.8
323
330
Statement
The series of PH-300 and PH-600 Electromagnetic Locks
are not only maintaining the great features and proven
performance of the ordinary Electromagnetic Locks but also
provide the latest revolutionary feature. The latest revolution
for the new series of Electromagnetic Locks is to combine the
Armature Plate with the door handle like bracket to become an
Armature Assembly, which hides the Armature Plate inside the
door handle like bracket. The latest design let the whole set of
Electromagnetic Lock can be installed vertically in the middle
of the doorframe. It improves the 'unbalance' problem of the
ordinary Electromagnetic Locks, which have to be installed at
the top corner of the doorframe. The latest revolutionary
feature of the 'door handle like bracket' can also replace the
ordinary door handle and work perfectly with the doorframe.
The installation is very simple without any other
accessories. The Armature Assembly and the
Electromagnetic Lock can be directly mount on the door frame
and the door separately, since the Armature Assembly and the
Electromagnetic Locks are fully assembled by the
manufacturer before they out of the factory. The extra tool kit
provided within the set is used to fix the blind nuts and fixing
screws in order to strongly hold the whole set of
Electromagnetic Locks on the door or door frame for extra
safety usage.
PH-300 Electromagnetic Locks provide 600LBS holding
force and can be applied on normal in-swinging door. PH-600
Electromagnetic Locks have 2 internal Electromagnetic Lock
sets, which can provide 1200LBS holding force. The 2.5
meter length is suitable for large doors. The internal Build-in
door position sensor (magnet bond sensor output) indicates
door open or closed.
PH M and PH 600M Electromagnetic Lock are upgraded
-300 -
35.4
PH-300
Specifications
Voltage Tolerance: 15%
Current Draw:
PH-300 PH-300M: 280mA@12Vdc
PH-600 PH-600M: 280mA@12Vdc X 2
(at temperature 20°C(
Magnetic bond sensor monitor output (SPDT rated
3A@12V DC), remotely monitors the door lock or
unlock status. (N.C. Output--Door opened; N.O.
Output--Door closed)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Holding Force:
PH-300 PH-300M: Up to 600 lbs )272 Kg(
PH-600 PH-600M: Up to 1200 lbs )545 Kg(
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-PH-300-600 Ver. C Published on 2008.04.30
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Magnet
Armature
(Power Off)
Magnet
Armature
(On Power)
PH-300 series
Mini Electromagnetic Lock
Operating Features
Trigger
TimerAdjust
Shorten
PH-300TD: Re-locking time delay
Relocking Time Delay Switch ensures
Power
Input
SPDT relay
3A@12VDC
N.C.
COM.
N.O.
l ll
the automatically turns to lock mode
after the door is closed properly and it
can be adjusted from 0 to 90 seconds.
Unique Anti-Residual design
When there is no power, there will be no holding force, and the push-off button
inside the Armature Plate will pop out immediately to release the Electromagnetic
Lock and the Armature Plate. The instant release circuit function will prevent
residual magnetism between Electromagnetic Lock and the Armature Plate.
Unique Anti-Residual design
Application
g
n
i
g
n
i
w
s
-
n
I
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
12Vdc
24Vdc
N.C.
COM.
N.O.
-
Power
Input
Voltage Selection jumpers
Check jumper settings before
connecting the lock to 24 VDC
input power. Damage to the lock
may result from incorrectjumper
settings.
+
Magnetic bond
sensor output
SPDT relay :3A@12VDC
-
Power
+
supply
Control
Device
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-PH-300-600 Ver. C Published on 2008.04.30
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...