Gianni Industries LZ-NH500NAU, EM-NH500 User Manual
LZ-NH500NAU Bracket
Typical mounting on IN-SWINGING door
L-Bracket
Armature
Frame
Application for the Electromagnet:
EM-NH500 Series
267
143
75
LZ-NH500NAU
Z-Bracket
48
In-Swinging
EM-NH500
Minimal: 75mm
Door
267
75
Unit:mm
1
Find a mounting location on the
door frame for the L bracket. Make
sure that the door is still closeable.
5
Close the door. Measure the correct
position by bringing the armature
plate close to the contact surface of
the electromagnetic lock.
2
Tighten the electromagnetic lock
on the L bracket by using the
fixing screw.
6
Turn on the power of EM-Lock,
and let the armature plate bonds
to the EM-lock. Adjust the position
between the Z bracket and the
door frame.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-LZ-NH500NAU Ver.A Published on 2008.08.04
Power
3
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
7
Once the position is correct,
use the screws to permanently
mount the Z bracket on the door
frame.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
4
Insert the guide pins into the
armature plate. Put one rubber
washer between armature plate
and the Z bracket.
Finish
Closing the cover on bracket.
&
Loading...