Gianni Industries LZ-NH-300N, EM-NH300 User Manual
LZ-NH-300N Bracket
Typical mounting on IN-SWINGING door
L-Bracket
Armature
Frame
Application for the Electromagnet:
EM-NH300 Series
55
Z-Bracket
In-Swinging
30
250
250
48
5
45.5
25
8
5
220
48
220
42
48
Door
Minimal:48mm
Unit:mm
Installation Steps of LZ bracket for In-swinging doors
1
Find a mounting location on the
door frame for the L bracket. Make
sure that the door is still closeable.
5
Put one rubber washer between
armature plate and the Z bracket.
2
Slide the electromagnetic lock to fit
with the mounting plate and tighten
the electromagnetic lock on the L
bracket.
6
Close the door. Measure the correct
position by bringing the armature
plate close to the contact surface of
the electromagnetic lock.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-LZ-NH-300N Ver.A Published on 2008.06.18
3
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
7
Power
Turn on the power of EM-Lock,
and let the armature plate bonds
to the EM-lock. Adjust the position
between the Z bracket and the
door frame.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
4
Insert the guide pins into the
armature plate.
Finish
Once the position is correct,
use the screws to permanently
mount the Z bracket on the door
frame. This should be the last step.
&
Loading...