Gianni Industries LZ-350 User Manual
LZ-350 Bracket
Typical mounting on IN-SWINGING door
L-Bracket
Armature
Frame
Application for the Electromagnet:
EM-350 Series
270
5
29
57
42
Z-Bracket
In-Swinging
30
270
270
54
48
Unit:mm
Door
Minimal:54mm
Installation Steps of LZ bracket for In-swinging doors
1
Find a mounting location on the
door frame for the L bracket. Make
sure that the door is still closeable.
5
Close the door. Measure the correct
position by bringing the armature
plate close to the contact surface of
the electromagnetic lock.
2
Tighten the electromagnetic lock
on the L bracket by using the
fixing screw.
6
Power
Turn on the power of EM-Lock,
and let the armature plate bonds
to the EM-lock. Adjust the position
between the Z bracket and the
door frame.
62
3
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
7
Once the position is correct,
use the screws to permanently
mount the Z bracket on the door
frame.
4
Insert the guide pins into the
armature plate. Put one rubber
washer between armature plate
and the Z bracket.
Finish
Closing the cover on bracket.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-LZ-350 Ver.C Published on 2008.05.27
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...