Gianni Industries L-10010N User Manual

The A value in the table below for each bracket to
mount on the door frame, shows the minimum
requirement distance of the door frame for
different electromagnetic lock model.

Magnet Grade Option Brackets

300 LBS

600 LBS

800LBS

1200 LBS

The new special styling bracket enables more aesthetic for the doors.

ValueA"

38mm

42mm

48mm

60mm

L-150, L-EM150...

L-300,L-10001ST...

L-750, L-350,L-400...
L-500,L-600...

L-10010N Bracket

Typical mounting on OUT-SWINGINGnarrow frame door

"L" brackets

Door
Frame

A

Magnet

Door
Leaf

38

Out-swinging

Unit:mm

Application for the Electromagnet:
10010, 10060 (Double) Series

1

Fold the mounting template along
the dotted line to a 90-degree angle.
Close the door, place the template
against the door and frame.

4

2

Drill three holes in the door as
indicated on the template.

5

40

Hollow Metal Door

3

16mm8mm

Drill an 8 mm hole
through door, from
sexnut bolt side only,
enlarge the 8mm hole to
16mm.

6

264(266)

252(254)

Reinforced Door

6.8mm for M8-1.25 thread

Drill an 6.8 mm dia.
Hole and tap for
M8x12.5 thread.

Finish

76

68

Solid Door

36mm

12.7mm8mm

Drill an 8 mm hole thru
door from sexnut bolt
side of door, drill

12.7mmhole, 36mm in
depth.

Power Power

Use the Allen wrench to tighten the
screws into the L bracket.

Turn on the power of EM-Lock, and
let the armature plate bonds to the
EM-lock. Adjust the position
between the L bracket and the
door frame.

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: [phone] / Fax: [phone]

E-Mail: [e-mail]
Website: gianni.tw

Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-L-10010N Ver.B Published on 2008.05.30

Once the position is correct, use the
screws to permanently mount the L
bracket on the door frame.

The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.

Test the unit. Insert the anti­tamper caps into the mounting
screw access holes.

&