Gianni Industries KS-750, SMB-370ALU, KS-750LD, KS-750S User Manual
Statement
Install Key Switch in the outside (as the figure) and parallel (or
series) connect with the power supply and electromagnetic
lock. If the electromagnetic lock is not be opened for the
reasons of that the proximity reader is out of order or that
unexpected accident happens, please switch N. C. or N. O.
contacts by the key to compel the fail-safe(Power to Lock) or
fail-secure(Power to open) electromagnetic lock opened. This
is a precaution of the access control system.
Momentary or
Maintained SPDT
General Purpose Key Switch
The connection for fail-safe Lock devices：
Uninterruptible
Power Supply
Relay output
Com.
N.C.
1
2
3
4
5
6
7
8
9
*
0
#
Reader
(outdoor)
Com.
N.C.
Power to Lock
Key switch
(outdoor)
Lock Device
(fail-safe)
Com.
Vandal resistant screw
Momentary SPDT
N. O.
Com.
N. C.
Maintained SPDT
N. O.
N. C.
Bracket
(Cylinder Exclude)
Faceplate
N. O.
Com.
N. C.
Ex: The electromagnetic locks. Please connect the Com. and
N. C. of the key switch in terms of series connection with the
cable of the power supply and electromagnetic lock. If the
electromagnetic lock won't be opened for the reasons of that
the proximity reader is out of order or that unexpected
accident happens, please switch N. O. contact by the key to
compel the power off and then the electromagnetic lock will be
opened.
The connection for fail-secure Lock devices：
Uninterruptible
Power Supply
Com.
Key switch
(outdoor)
N.O.
Relay output
Com.
N.O.
1
2
3
4
5
6
7
8
9
*
0
#
Reader
(outdoor)
Lock Device
(fail-secure)
Power to unlock
Com.
N. O.
Com.
N. C.
N. O.
N. C.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-KS Ver.E Published on 2008.07.09
Com.
N. O.
N. C.
Please parallel connect the Com. and N. O. of the key switch in
terms of parallel connection with the cable of the power supply
and electromagnetic lock. If the electromagnetic lock won't be
opened for the reasons of that the proximity reader is out of
order or that unexpected accident happens, please switch N.
C. contact by the key to compel the power on and then the
electromagnetic lock will be opened.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
General Purpose Key Switch
British Sized ANSI Sized
British standard
electrical box (excluded)
60.0
2.0
KS-500
85.5
85.5
This series of request to exit can be mounted directly in British
standard electrical box (Flush mount) or with SMB-86ALU
housing for surface mount.
PBT-7510A
Unit: mm
SMB-86ALU
Max. Ratings : 4A@125 Vac,
2A@250Vac or 4A@28Vdc
Type of actuation: Momentary
Contact arrangement: SPDT
Contact resistance:
50 mΩ Max.(initial)
Flush mount or with SMB-050 box for surface
Momentary SPDT switch
Switch ratings 15A@120~250VAC
KS-700W
Momentary (or Maintained) SPDT
Switch ratings 5A@125VAC.
Flush mount or with SMB-050 box for surface (KS-700WS)
ANSI Box
KS-700WS
KS-600
Flush mount only
Stainless faceplate
Momentary DPDT switch
Switch ratings 5A@125V~
Com.
N. O.
N.C.
Bracket
(Cylinder Exclude)
Faceplate
Optional Housing
SMB-050 SMB-750
With SMB-050 or SMB-750 housing (Optional) for surface mount
installation.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-KS Ver.E Published on 2008.07.09
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...