Gianni Industries Keyprox Plus User Manual
Keyprox Plus
Access Control System
Features
Controller supports two readers.
Controller can control 2 independent
doors or a single door.
Use RS-232 or RS-485 to connect a
single controller to a PC.
Up to 16 controllers can be connected
using a RS-485 network to a PC.
Up to 32 independent doors can be
controlled.
The system supports 2000 tags.
Each controller stores last 2000
transactions with date & time stamp in
non-volatile memory. All transactions including denied access, pushbutton and
alarm conditions are logged.
Optional Door Switch allows use of 4
timers to solve complex locking
problems.
Optional Exit Push Button for each door.
Access control is achieved by assigning a
user an Access Parameter.
There are 2 predefined and 8 user
defined Access Parameters. User defined
parameters consist of 5 time zones for
each day of week +holiday during which
Statement
The system is based on a controller
that supports two Secure Card readers
which can be mounted up to 50 meters
from the controller with a simple 3-wire
connection. The controller can be
configured to operate a single door or two
independent doors.
The controller has a RS-232
connection allowing single controller
systems a simple means of connecting to
a PC provided the cable run is less than
30 meters. The controller also has a RS485 connection that will support up to 16
controllers connected in a RS-485
network to a PC thus allowing the control
of up to 32 doors.
In this configuration the PC will require
a 311 RS-232/485 Interface/Repeater to
Free Software !!
The software is required for all programming of the system,
downloading transaction sand printing
Reports.
655-20
Controller
311-30
RS-485 to RS-232
convertor
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-Keyprox Plus Ver.B Published on 2008.05.21
656-20-1
Secure Mini Reader
657-20-1
ANSI-sized Reader
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Keyprox Plus
Access Control System
Application
The KeyProx Plus controller has both a RS-232 and a RS-485 interface.
Use the RS-232 interface for simple installation having a single controller and where
the distance between the controller and the PC is less than 30 meters. The drawings
below show typical RS-232 installations. RS-232 connection to PC - max 30m
Single Door System
3core
2core
RS-232 to PC
2core
2core
Power supply
AC IN
12VDC0.5A
NL - +
P.B.
NO NCCOM
3core
Reader A
2core
Door Sw 1
Door strike 1
Reader B
Two Door System
Door strike 1
2core
3core
Reader A
Exit 1
Exit 1
2core
2core
2core
Door Sw 2
Door Sw 1
RS-232 to PC
2core
Power supply
AC IN
12VDC0.5A
NL - +
P.B.
NO NCCOM
2core
2core
Door strike 2
3core
Reader B
Exit 2
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-Keyprox Plus Ver.B Published on 2008.05.21
Gianni supplies all accessories for access control application
including maglock, electric bolt lock, electric strike ,exit button,
power supply, prox cards or fobs.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...