Gianni Industries GL-1800F-IOTB User Manual
Magnet
Armature
(Power Off)
Magnet
Armature
(On Power)
GL-1800F-IOTB
Water-Proof Electromagnetic Lock
Specifications
8.0 kg
When there is no power, there will be no holding force, and the push-off button will
pop out immediately, to release the Electromagnetic Lock and the Armature Plate
for no residual magnetism.
Unique Anti-Residual design
Statement
The fail-safe Electromagnetic Lock design with no
mechanical parts but magnetic force to secure and release the
doors, suitable for use in areas which required access
controlled or egress such as exit door.
The Electromagnetic Locks are totally sealed in an epoxy
filled stainless steel case for water-resistant and vandalresistant purpose. A threaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even in severe weather.
GL-1800F-IOTB offers up to 1800 LBS holding force. It can
be used with Z or L brackets are suitable for use on in-swing
or door applications.sliding
This series of Waterproof Magnetic Lock is made with epoxy
potting compound and is protected by this compound. Also,
GEM Waterproof Series Magnetic Locks have been proved to
have withstood a water resistance as established in
accordance with the test procedures of IPX7, IPX8 through a
trusted third party. Therefore users need not worry that the
lock will be rusted or sparked, if the lock is using in outdoor
applications and installing in confined space where any
inflammable gas.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-GL-1800F-IOTB Ver.A Published on2008.05.12
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...