Gianni Industries GEM PSB User Manual
Features
PSB series
Power Supply Unit
Input: 1 10~120 VAc or 230~240V Ac .
（）
Strong power output even enough for large load.
LED indicates power supply status.
Build-in triple section fuse protection
Each output is protected by individual PPTC
Build-in backup battery Charger for uniterruptible.
Tamper Switch Protection.
Statement
Gianni power supplies are housed in a robust,
compact wall mounted steel fabricated case with
lift-off hinged front panel. In the event of a mains
power failure, standby power is automatically
provided from battery charging output.
Specifications
12VDC case Size
24VDC case Size
PSB-1A PSB-2A PSB-3A PSB-5A
Input
Output
LEDs indicate
Build in triple section
fuse protection PPTC（）
12 VDC
24 VDC
Output contact port
12VDc case Size
24VDccase Size
Build-in backup
battery Charger
2 LEDs 2 LEDs 2 LEDs
1
() ( ) ( )L 330 W 330 D 80 () ( ) ( )L 330 W 330 D 80 () ( ) ( )L 330 W 330 D 80
1 LED Power status
1 3 5
)( ) ( ) (
L 230 W 200 D 80)( ) ( ) (L 230 W 200 D 80
Tamper Switch
*Optional: Tamper Switch: When housing case is opened, the tamper switch will switch to N.O. Normal Open
*
Battery charger and may accommodate up to 2 batteries that provide continuous operation of access controls and locking
hardware during a power failure.
*Power and Charge status LEDs indicate in tri-color.
Power LED in yellow= power activates.
*
Charge LED in red = charge activates.
*
Power LED in green = battery power outputs.
*
2LEDs
() ( ) ( )L 330 W 330 D 80
（）
2LEDs
2LEDs
() ( ) ( )L 330 W 330 D 80
() ( ) ( )L 330 W 330 D 80
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-PSB Ver.E Published on 2009.06.12
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
PSB series
Power Supply Unit
Application
Uninterruptible
Power Supply
1
2
3
4
5
6
7
8
9
*
0
#
Reader
(outdoor)
PSB3A-2A-115
PSB3A-2A-230
To switch DC output
screw fastened:
Door Loop
Lock
Device
Optional Accessories
Push Bar
PSB-TAMPER
Tamper Switch
1.Status LED specifications
- Power:
Yellow: Both AC input and DC outputs are at normal status.
Green: There is no AC input, and the power is supplied by
the batteries.
Red: There is no output voltage.
- Charge:
Red light on: The batteries are charging.
Red light off: The batteries are finished charging. (If the light
is off immediately after the power is on, there may
be some damages with the batteries).
2.Installation specifications
- There is always voltage output between the OUTPUT 1~2.
When the TAMPER is at N.C, there is voltage output between
the OUTPUT 3~5, and when the TAMPER is at N.O, there is
no voltage output.
- Each OUTPUT is protected by individual PPTC from over
current; therefore each load of output may not exceed 1AMP.
- TAMPER switch: system on-off push switch mounted on
outside cover. When outside cover is close, TAMPER switch
is on N.C; when outside cover is open, TAMPER switch is on N.O.
For series connection at ''L'', it will disconnect the main power
for 230Vac.
For parallel connection at the TAMPER, it will control the output
between the OUTPUT 3~5.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-PSB Ver.E Published on 2009.06.12
(PSB-5A)
TAMPER SWITCH
(option)
TRANSFORMER
OR
Main Input
FUSE
Main Input
When housing case is opened, the tamper switch
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...