Gianni Industries GEM EM-400x User Manual

Features

Allow up to 600 proximity cards and PIN codes RF Frequency: EM-400x 125 KHz Tamper switch and alarm buzzer included Fully Programmable via keypad and master code Access mode selectable: card only, card or PIN, card+PIN Support Wiegand 26 or 44-bit format auxiliary reader Logical memory to prevent duplication Invalid PIN Lock-out Beeper sound Non-Volatile Memory Removable memory chip from the PC board

Statement

DG-600E st and -al one Proximity Rea der is ideal fo r single-door ac ces s control. It may c onn ect to another r ead er and serve as a con tro lle r. D G-6 00E enables the beeper to go off whenever the key pad i s pre sse d. A tamper switch is u sed t o protect th e reader from ext ern al damage by l ink ing the relay to the alarming system. Th is model communicates in Wie gan d protocol an d has a set of 60 0 proximity ca rds set to 26- bit or44-bit. It takes the re ade r 0.5 seconds at mos t to read a proximity ca rd or 5- dig it PIN co de. The built-in non -vo lat ile memory preserves th e PINs for as long as 10 years. Eve n when the power fails, the sto red PIN codes will not be wa she d away.

DG-600E Stand-alone Proximity Reader

35.

Specifications

Operating Voltage: 12VDC Current Draw: Average 50mA, Peak 100mA/12VDC Tra nsm itt ing F req uen cy: 1 25 KH z Memory Volume: 600 Proximity cards/tokens and PIN codes Read Ra nge : Up to 10 cm (Depending on local installation

conditions) Keyboard: 12 digit keypad (0~9, *, #) Input: Request-to-exit, door reed switch, auxiliary reader Relay rating: 2A MAX/30VDC, 0.4A/120VAC Invalid PIN Lock-out: Th e system will shut dow n f or 60

seconds af ter the attempt to read the mas ter or PIN cards has faiiled for over 5 times. (No beeper signal when pressing on the keypad)

Relocking timer: Strike Time: 1~99 seconds (adjustable) Strike mode: Access Timer or Latch Alarm Function: Door Held Open Alarm: 10~99 Door Forced Alarm Panel Temper Alarm Auxiliary Reader Format: Wiegand 44 or 26-bit only format (a dju sta ble), he xad eci mal (Em 64- bit standard R /O or

compatible) Case Material: ABS (UL94V0) Color: Beige White Operating Te mpe rat ure : -20 ~+7 0°C A mbi e nt Hu mi d ity : 5 ~ 95% r e lat iv e h umi di t y (no n-

condensing) Visua l S ignals: 3 L ED displ ay with aud ibl e Indica tio n

(Red/Yel low /Gr een ) EMC: Meet CE requirement

27.

Unit: mm

Warranty

The product is warranted against defects in material and workmanship while used in normal service for a period of 1 year fro m t he date of sale t o t he original customer. The GEM policy i s o ne of continual development and improvement; therefore GEM reserves the right to change specifications without notice.

GIANNI IN DUSTRIES, INC.

No. 13, Zh ong xing Rd., Tu cheng Dis t., New Tai pei City 236 ,Taiw an (R.O.C .)

Tel: 886 -2 22 67 7986 / Fax : 886-2 226 7 9876

E-Mail : inq uiry@gi anni.co m.tw Web sit e: gianni .tw

Optional Readers

DG-600E Stand-alone Proximity Reader

Connecting Diagram

Power supply

(12VDC)

*Linear supply recommended

714-60

GEMPROX-E

EM 125KHz

GEMPROX-26M

Fail-Safe Lock St 2 connect to 1-2

Fail-Secure Lock St 2 connect to 2-3

Mifare ® ID Reader

GEMPROX-630EM-KP

EM 125KHz Keypad and proximity reader

GEMPROX-630EM

EM 125KHz

Door switch contact or the output

electric lock signal of

Push Button

External relay connecting to the warning system

Insert 2-3 position to reset

DG-600E Jp1 le ads to Wiegand 44 b its format

DG-600E Jp1 sh ort-circuit t o Wiegand 26 bits f ormat

Auxiliary Reader

(Wiegand Format)

Connect 1-2, C and D contact is N. C. Connect 2-3, f or N.O.

Connect to 1-2 ;C and A co ntact is N.C. Connect to 2-3 ; for N.O.

GIANNI IN DUSTRIES, INC.

No. 13, Zh ong xing Rd., Tu cheng Dis t., New Tai pei City 23 6, Taiwa n (R. O.C.)

Tel: 886 -2 22 67 7986 / Fax : 886-2 226 7 9876

E-Mail : inf o@giann i.com.t w Web sit e: gianni .tw

Gianni Industries GEM EM-400x User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual