Page 1
Waterproof Test:
Magnet
Armature
(Power Off)
Magnet
Armature
(On Power)
Reference to IEC 60529 Edition 2.1: 2001-02-IPX7
Statement
The EM-750 Electromagnetic Lock design with no
mechanical parts but magnetic force to secure and release the
doors, suitable for use in areas which required access
controlled or egress such as exit door.
The Electromagnetic Locks are totally sealed in an epoxy
filled stainless steel case for water-resistant and vandalresistant purpose. A threaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even in severe weather.
We offers up to 800 pounds holding force with 12V DC
power input (24V DC or 12/24V DC dual input voltage
available by special order), and with the full range of optional
brackets, it can be installed on all type of door frames such as
Hollow, Wooden door. It is the best choice for electronic
security industry and system integrators.
EM-750 Midi Surface
Water-Proof Electromagnetic Lock
Regular Installation
When there is no power, there will be no holding force, and the push-off
button will pop out immediately, to release the Electromagnetic Lock
and the Armature Plate for no residual magnetism.
Unique Anti-Residual design
Specifications
Voltage Tolerance: 15%
Current Draw: 340mA@12Vdc (at temperature 20C)
(Further notice for diverse input voltage on special order requirement)
Magnetic bond sensor monitor output (EM-750R)
(SPDT rated 0.25A@12V DC), remotely monitors the door
lock or unlock status. (N.C. Output--Door opened; N.O.
Output--Door closed)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20C
Holding Force: Up to 800 lbs )363 Kg(
Dimensions:
Magnet:(L) 230, (W) 46, (D) 30 mm
Armature Plate:(L) 185, (W) 45, (D) 14 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 3.0 Kg
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-EM-750 Ver.C Published on 2008.05.12
This series of Waterproof Magnetic Lock is made with epoxy
potting compound and is protected by this compound. Also,
GEM Waterproof Series Magnetic Locks have been proved to
have withstood a water resistance as established in
accordance with the test procedures of IPX7, IPX8 through a
trusted third party. Therefore users need not worry that the
lock will be rusted or sparked, if the lock is using in outdoor
applications and installing in confined space where any
inflammable gas.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Page 2
Optional Brackets
The door swinging direction and the door frame header are
used to determine whether the bracket is required and this
identify is a measure of which brackets is suitable. Our
optional brackets include L bracket LZ bracket and U
bracket
.
With L-bracket for narrow door frames
When <48mm,must
"A"
installed with "L" brackets.
Door
Frame
A
-,- -
L-750
EM-750 Midi Surface
Water-Proof Electromagnetic Lock
Out-swinging
Door
Leaf
Magnet
Armature
48 mm
With LZ-bracket for in-swinging doors
LZ-750
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-EM-750 Ver.C Published on 2008.05.12
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...