Gianni Industries EB-260 User Manual
EB-260
ELECTRIC DEADBOLT
Dimension
30
48
35
EB-260 electric deadbolt incorporates
mechanic cylinder to operate manual lock/unlock
if power is failure for safety.
Specifications
Fail-Secure Version (Power to Open)
Power Input: 12~28 V DC
Voltage Tolerance: 10%
Current Draw:
Pull in: 1.0A, Holding: 0.3A@12V DC
(at temperature 20°C
Operating Temperature: -10~+45C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20C
Tested to 500000 cycles.
Face Plate Material: stainless steel
Auto-relocking Time Delay : 3, 8 ,15 ,25 seconds
Weight )Approx.(: 1.3 Kg
220
38.5
260
240
19
46
16
35
175
15
260
Unit: mm
30
20
3
Adjustable Sensor
The door close sensor can work up to a range of 5mm. If
there is a wide door gap, a sensor magnet within the strike
plate of the door can be adjusted to improve sensor accuracy.
Reed
5mmmaxi
45
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc.All rights reserved.
DM-CA-EB-260 Ver. D Published on 2008.10.20
27.5
Solid bolt for superior strength
Greater security is provided by the 13.5mm diameter (
bolt throw)
solid stainless steel bolt with hardened magnet
core, which has resistant to metal cutting saws. The bolt also
rotates freely, making attempts to tamper or cut extremely
difficult.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
16mm
EB-260
ELECTRIC DEADBOLT
Door Leaf flush installation
EB-260 electric deadbolt incorporates mechanic cylinder to
operate manual lock/unlock if power is failure for safety, or
vertically on the side of the door or doorframe .
Cylinder operates by
thumb turn or use key
from outside.
Long life solenoids
Special designed solenoid for strength and long life
operating lifetime with guaranteed 500,000 operations.
Clamp Design
When the bolt is extended to keep the door locked, it draws
only 0.3A in a holding mode down from 0.9A while the bolt is
retracted. This design both protects the power supply and
extends the life of the electric dropbolt.
Pull in
Holding
Current Draw (mA)
Time (seconds)
12 to 28V DC self-regulating
The Electric Deadbolt Lock offers 12/24 VDC dual input
voltage with self-regulation feature.
Optional Accessory
DL-200
Door Loop
The Door Loop is for protection
of extension wiring from
damages with high security
concerns.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc.All rights reserved.
DM-CA-EB-260 Ver. D Published on 2008.10.20
Lock Delay Settings
Use jumpers to adjust the time between 3 to 25 seconds for
door locking time delay. This is the time, which takes the
Deadbolt to automatically lock after the door is closed.
3 seconds 8seconds 15 seconds 25 seconds
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...