Gianni Industries EB-220-32, EB-220-38 User Manual
EB-220-32 EB-220-38
Statement
The EB-220 electric dropbolt s are available in
32mm and 38mm wide faceplates. In this design
the EB-220 electric dropbolt comes from the same
logic circuit , this lock is the downsize version of
EB-262 (without position ball ).
EB-220 Electric Dropbolt
Dimension
38
26
220
180
200
41
140
Unit: mm
Specifications
Fail-Safe Version (Power to Lock)
Power Input: 12 V DC
Voltage Tolerance: 10%
Current Draw:
Pull in: 0.9A, Holding: 0.3A@12V DC
(at temperature 20 C)
Magnetic bolt status output (SPDT rated 3A@30VDC)
indicates bolt locked or unlocked status.
Operating Temperature: -10~+45 C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20 C
Tested to 500000 cycles.
Built-in logical circuitry
Auto-relocking Time Delay : 0, 3 ,6 ,9seconds
Face Plate Material: stainless steel
Weight (Approx.): 1.0 Kg
Double Acting Doors
EB-220 Electric dropbolt is specially designed for use on
double swinging doors. They can also be installed on both out
and in-swinging doors.
°
°
°
Smart Circuitry
The vandal resistant circuitry means the door close sensor
can't be fooled into projecting the electric dropbolt unless the
door is actually closed. The reed sensor automatically
disconnects after the bolt is projected to enhance security of
the lock.
Auto-detective circuitry
The unique intelligent logic circuit in GEM's electric
dropbolts keeps the bolt retracted whilst the door is unlocked
until the door is properly closed. This feature ensures the bolt
will not extend if the door is improperly aligned.
double action door
in-swinging door
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-EB-220 Ver.E Published on 2008.10.20
Out-swinging
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
EB-220 Electric Dropbolt
Horizontal or vertical installation Long life solenoids
GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
Fig. A Horizontal Installation (Frame Header)
Fig. B Vertical Installation (Side Jamb)
Adjustable Sensor
Special designed solenoid for strength and long life
operating lifetime with guaranteed 500,000 operations.
Clamp Design
When the bolt is extended to keep the door locked, it draws
only 0.3A in a holding mode down from 0.9A while the bolt is
retracted. This design both protects the power supply and
extends the life of the electric dropbolt.
Pull in
Holding
Current Draw (mA)
Time (seconds)
Optional Accessory
The door close sensor can work up to a range of 5mm. If
there is a wide door gap, a sensor magnet within the strike
plate of the door can be adjusted to improve sensor accuracy.
Reed
5mmmaxi
45
Lock Delay Settings
The door locking delay is the time between the door being
closed and the bolt engaging . This can be set to up to 9
seconds at 3 second intervals by adjusting the jumpers.
Auto Relocking Timer Setting
0 seconds 3 seconds 6 seconds 9 seconds
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-EB-220 Ver.E Published on 2008.10.20
The brackets UBK-262 are compatible with frameless
glasses doors(Fig. C).
UBK-262 Bracket
For10or12mmthicknessofglass
Fig. C
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...