Gianni Industries EB-200NVGL, EB-200N User Manual
EB-200N ELECTRIC DROPBOLT
Dimension
EB-200N-32EB-200N-38
Statement
The EB-200N electric dropbolt is one of
the most economical choices and it also
has a complete optional accessories
included. The EB-200N electric dropbolts
are available in 32 mm and 38 mm wide
faceplates. For the surface mount
application, it can be used with SMB200N surface mount back case. Also,
after the door installs with the UBK-200N-
Specifications
Fail-Safe Version (Power to Lock)
Power Input: 12 V DC
Voltage Tolerance: 10%
Current Draw:
Pull in: 0.9A, Holding: 0.3A@12V DC
(at temperature 20°C)
Door Position status output (Reed rated 0.25A@30VDC)
indicates door opened or closed status.
Operating Temperature: -10~+45°C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20°C
Tested to 500000 cycles.
Auto-relocking Time Delay : 0, 3 ,6 ,9seconds
Weight (Approx.): 1.2 Kg
Lock Delay Settings
The door locking delay is the time between the door being
closed and the bolt engaging . This can be set to up to 9
seconds at 3 second intervals by adjusting the jumpers.
Auto Relocking Timer Setting
41
28
Ø30
Unit: mm
EB-200N
25
25
100
42
25
225
100
80
203
183
32
(38)
EB-200NVGL
14
56
205
66
Clamp Design
When the bolt is extended to keep the door locked, it draws
only 0.3A in a holding mode down from 0.9A while the bolt is
retracted. This design both protects the power supply and
extends the life of the electric dropbolt.
Pull in
0 seconds 3 seconds 6 seconds 9 seconds
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-EB-200N Ver.E Published on 2008.10.20
Current Draw (mA)
Holding
Time (seconds)
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
EB-200N ELECTRIC DROPBOLT
Horizontal or vertical installation
GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
Horizontal Installation
(Frame Header)
Smart Circuitry
The vandal resistant circuitry means the door close sensor
can't be fooled into projecting the electric dropbolt unless the
door is actually closed. The reed sensor automatically
disconnects after the bolt is projected to enhance security of
the lock.
Optional Accessory
The KR-140 Key Unlatches are also available to install
together with Electric Dropbolt Locks, which provide the
emergency manual release capability to prevent any
unpredictable circumstances that disabled the Electric
Dropbolt Locks.
(Cylinder is exclude)
Optional Brackets
EB-200NVGL
Sensor
Solid bolt for superior strength
Greater security is provided by the 13.5mm diameter (
bolt throw)
core, which has resistant to metal cutting saws. The bolt also
rotates freely, making attempts to tamper or cut extremely
difficult.
solid stainless steel bolt with hardened magnet
16mm
Long life solenoids
Special designed solenoid for strength and long life
operating lifetime with guaranteed 500,000 operations.
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
UBK-200N-38
(U-bracket )
The unit may also be fitted semi-flush with the use of the
SMB-200N completed housing. Or the EB-200N may also be
fitted to a full glass door and glass frame application, using
2pcs of the SMB-200 Bracket and 2pcs of the UBK-200N-38
mounting brackets (EB-200NVGL). The thickness of glass are
14 mm maximum.
SMB-200N
(Completed housing )
Surface Installation
Installation on Full Frameless Glass Door
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-EB-200N Ver.E Published on 2008.10.20
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...