Gianni Industries EB-195, EB-190 User Manual
EB-190
EB-195
EB-190, EB-195
ELECTRIC DROPBOLT
Dimension
115
149
185
210
90
25
Specifications
Fail-Safe Version (Power to Lock)
Power Input: 12 V/24V DC (self-regulating)
Voltage Tolerance: +-10%
Current Draw:
Pull in: 0.9A, Holding: 0.3A@12V DC
(at temperature 20 )
BSS output:Magnetic bolt status output (SPDT rated
3A@30VDC) indicates bolt locked or unlocked status.
DPS output: Indicates door position (opened or closed),
Reed rated 0.25Amp@30VDC.
Operating Temperature: -10~+45
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20
Tested to 500000 cycles.
Built-in logical circuitry
Auto-relocking Time Delay : 0, 3 ,6 ,9seconds
Face Plate Material: stainless steel
Weight: 0.6 Kg
?
?
?
41
Unit: mm
Statement
The EB-190 electric dropbolt is the upgraded
version of EB-180. The 25mm wider faceplate is
designed for installation in virtually all types of
doors and frames. The bolt status switch sensor
and door position status sensor have been added.
The rectangular-shaped (EB-195) and arcÂshaped faceplate is used to suit the
different users' habits of installations.
Door Position Status
output: Indicating door
position (opened or
closed),Reed rated
0.25Amp @30VDC.
Bolt Status Switch
sensor output:
Indicating bolt status
(Locked or Unlocked)
Relay rating:
3Amp@30VDC
(EB-190)
DPS & BSS output
N.O.
COM.
N.C.
N.C.
COM.
N.O.
Sensor
-
+
Double Acting Doors
EB-190 Electric dropbolt is specially designed for use on
double swinging doors. They can also be installed on both out
and in-swinging doors.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EB-190 Ver.D Published on 2008.10.20
Solid bolt for superior strength
Greater security is provided by the 13.5mm diameter (
bolt throw)
solid stainless steel bolt with hardened magnet
core, which has resistant to metal cutting saws. The bolt also
rotates freely, making attempts to tamper or cut extremely
difficult.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
16mm
EB-190, EB-195
ELECTRIC DROPBOLT
Long life solenoids
Special designed solenoid for strength and long life
operating lifetime with guaranteed 500,000 operations.
Clamp Design
When the bolt is extended to keep the door locked, it draws
only 0.3A in a holding mode down from 0.9A while the bolt is
retracted. This design both protects the power supply and
extends the life of the electric dropbolt.
Pull in
Holding
Current Draw (mA)
Time (seconds)
Horizontal or vertical installation
GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
Auto-detective circuitry
The unique intelligent logic circuit in GEM's electric
dropbolts keeps the bolt retracted whilst the door is unlocked
until the door is properly closed. This feature ensures the bolt
will not extend if the door is improperly aligned.
Auto-detective circuitry
Smart Circuitry
The vandal resistant circuitry means the door close sensor
can't be fooled into projecting the electric dropbolt unless the
door is actually closed. The reed sensor automatically
disconnects after the bolt is projected to enhance security of
the lock.
Sensor
Vandal resistant
circuit design
Fig. A
Fig. B
Horizontal Installation
(Frame Header)
Vertical Installation
(Side Jamb)
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EB-190 Ver.D Published on 2008.10.20
Breakthrough in innovation ideas
Unobtrusive and slim design can be flush mounted directly
into metal such as door mullions.
Lock Delay Settings
The door locking delay is the time between the door being
closed and the bolt engaging . This can be set to up to 9
seconds at 3 second intervals by adjusting the jumpers.
Auto Relocking Timer Setting
0 seconds
3 seconds 6 seconds 9 seconds
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...