Gianni Industries EB-185, EB-180 User Manual

EB-180, EB-185
ELECTRIC DROPBOLT

EB-180

EB-185

Dimension

149

30.8

100

75

185

210

41

210

185

149

25

Unit: mm

25

30.2

Statement

The EB-180 electric dropbolt is very lightweight.
The 25 mm wider faceplate is designed for
installation in virtually all types of doors and
frames. The rectangular-shaped (EB-185) and
arc-shaped (EB-180) faceplate is used to suit the
different users' habits of installations.

Specifications

Fail-Safe Version (Power to Lock)
Power Input: 12 V/24V DC (self-regulating)
Voltage Tolerance: 10%
Current Draw:
Pull in: 0.9A, Holding: 0.3A@12V DC
(at temperature 20°C)
Magnetic bolt status output (SPDT rated 3A@30VDC)
indicates bolt locked or unlocked status.
Operating Temperature: -10~+45°C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):

<current temperature +20°C
Tested to 500000 cycles.
Built-in logical circuitry
Auto-relocking Time Delay : 0, 3 ,6 ,9seconds
Face Plate Material: stainless steel
Weight (Approx.): 0.6 Kg

16.5

57.5

100

75

45

24

9.9

10

R8

20

Ø5.3 x 10.5-2 PlacesØ

R12.5

140

12.5

3

Double Acting Doors

EB-180 Electric dropbolt is specially designed for use on
double swinging doors. They can also be installed on both out
and in-swinging doors.

Solid bolt for superior strength

Greater security is provided by the 13.5mm diameter (

bolt throw)

solid stainless steel bolt with hardened magnet
core, which has resistant to metal cutting saws. The bolt also
rotates freely, making attempts to tamper or cut extremely
difficult.

16mm

41

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: [phone] / Fax: [phone]

E-Mail: [e-mail]
Website: gianni.tw

Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-EB-180 Ver.D Published on 2008.10.20

The products are manufactured under an ISO
9001 QC 080000 Certified Quality

&

Management Program environment back its
product quality, performance and commitment
to customersatisfaction.

EB-180, EB-185
ELECTRIC DROPBOLT

Long life solenoids

Special designed solenoid for strength and long life

operating lifetime with guaranteed 500,000 operations.

Clamp Design

When the bolt is extended to keep the door locked, it draws
only 0.3A in a holding mode down from 0.9A while the bolt is
retracted. This design both protects the power supply and
extends the life of the electric dropbolt.

Pull in

Holding

Current Draw (mA)

Time (seconds)

Auto-detective circuitry

The unique intelligent logic circuit in GEM's electric
dropbolts keeps the bolt retracted whilst the door is unlocked
until the door is properly closed. This feature ensures the bolt
will not extend if the door is improperly aligned.

Auto-detective circuitry

The unique intelligent logic circuit in GEM's electric
dropbolts keeps the bolt retracted whilst the door is unlocked
until the door is properly closed. This feature ensures the bolt
will not extend if the door is improperly aligned.

Sensor

Horizontal or vertical installation

GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.

Fig. A

Fig. B

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: [phone] / Fax: [phone]

E-Mail: [e-mail]
Website: gianni.tw

Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-EB-180 Ver.D Published on 2008.10.20

Horizontal Installation

(Frame Header)

Vertical Installation

(Side Jamb)

Breakthrough in innovation ideas

Unobtrusive and slim design can be flush mounted directly

into metal such as door mullions.

Lock Delay Settings

The door locking delay is the time between the door being
closed and the bolt engaging . This can be set to up to 9
seconds at 3 second intervals by adjusting the jumpers.

Auto Relocking Timer Setting

0 seconds

3 seconds 6 seconds 9 seconds

Warranty

The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.

The products are manufactured under an ISO
9001 QC 080000 Certified Quality

&

Management Program environment back its
product quality, performance and commitment
to customersatisfaction.