Gianni Industries DG-700 User Manual

DG-700
Stand alone Access Controller

Features

Allows up to 65000 proximity cards
Detects the working as machine automatic reply
Has security preserves the hypothesis/Relieves the function
The Unit will operate with card only, PIN or card, PIN + card.
Gate position surveillance input function
Built-in Proximity Reader
Anti-Passive tag along warning output function
Relay and Push to Exit Button function
Proximity automatic setting function
Tricolor LED
May establish 2 Master Cards

Specifications

Input: Request-to-exit
Relay Electric Current: 3A Max@30VDC; 3A@120VAC
Operating Voltage: 10~15VDC
Operating Temperature: -5~60C
Proximity Cards: 65000
Keyboard: 12digits Keypad (0~9,*,#)
Waterproof Design: Waterproof Type Key Pads
Auxiliary Reader: (WG26, WG34)
Transmitting Frequency: 125 kHz
Visual Signals: LED (Red, Blue, Green)
Relay delay timer: 1~255 seconds
Interface: Optional with (RS232 or Rs485)
Read Range: Up to 10 cm
(Depending on local installation conditions)
Size: 110(H)x76(W)x23.5(D)mm
Ambient Humidity: 5%~95%

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: [phone] / Fax: [phone]

E-Mail: [e-mail]
Website: gianni.tw

Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-DG-700 Ver.E Published on 2008.06.09

Auxiliary reader

GEMPROX-E

The auxiliary reader must not be further than 50 meters from
the DG-700. Also this reader should be nearer than 60
centimeters, to avoid disturbance. The suggested wire gauge
is #22~26 AWG. auxiliarySplit of units for DG-700 and reader
in ranging up to 50 M bring out the friendly system device for
low cost but high security with anti-tampering as well as
convenience and reliability.

Warranty

The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.

The products are manufactured under an ISO
9001 QC 080000 Certified Quality

&

Management Program environment back its
product quality, performance and commitment
to customersatisfaction.