Gianni Industries DG-600H User Manual
DG-600H
Stand-alone Proximity Reader
Features
Allows up to 600 proximity cards and PIN codes
125 KHz Frequency 26~37-bit format
Tamper switch and alarm buzzer included
Fully Programmable via keypad and master code
Access mode selectable: card only
card or PIN card+PIN
；
；
Supports Wiegand format auxiliary reader
Logical memory to prevent duplication
Invalid PIN Lock-out
Beeper sound gives of keypad composition
Non-Volatile Memory
Removable memory chip replacement
Statement
DG-600H
providing single door access control, and ideal for small
controllers application. When conjunction with
extended auxiliary reader Wiegand 26~37-bit or 26-bit only
format output on outdoor for high security access control
integration nowadays and the future, it's designed to mounts
on a standard-single-gang electric wall box or on the surface
of an interior or exterior wall.
capacity in reading time max. 0.5 second. Each card is
presented to the Reader has to with PIN codes 5 digits
password attached for multi-authorized. Logical memory can
prevents unauthorized persons from gaining PIN codes entry
by trial and error, system will shut down 60 seconds while 5
times of incorrectly password attempted which would
eliminate any random application of card ID code
transmission. Beeper sound gives a proper way of keypad
composition for the system in any case to work it goes.
Enables various beeper and LED configurations, depending
on individual sit requirements.
to ensure vandal proof and suspend the time-delay overdue.
Programmed memory stored to the system for at least 10
years, nevertheless an incidentally power breaking down. The
DG-600H
providing the best read range in its class.
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright © 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-600H Ver.D Published on 2008.05.06
The stand-alone Proximity Reader serial
DG-600H
DG-600H
runs with 600 proximity cards and PIN codes
Build in tamper switch that turns on alarm relay activation
is highly reliable, warranted for life and capable of
35.5
70
1
2
3
4
5
6
7
8
9
*
0
#
127.5
Unit: mm
Specifications
Operating Voltage: DC +9V to 16V
Current Draw: Average 50mA, Peak 100mA@ 12Vdc
Transmitting Frequency: 125 KHz,
26~37-bit format (Host)
Memory Volume: 600 Proximity cards/tokens and PIN codes
Read Range: Up to 10 cm (Depending on local installation
conditions)
Keyboard: 12 digits keypad (0~9, *, #)
Input: Request-to-exit, door reed switch, auxiliary reader
Relay Electric Current: 2A MAX @30Vdc, 0.4A @120Vac
Invalid PIN Lock-out: The system will shut down for 60
seconds while 5 times of incorrectly Master Codes enrolled or
PIN codes attempted, None beeper signal of keypad
activations
Relocking timer:
Strike Time: 1~99 seconds (adjustable)
Strike mode: Access Timer or Latch
Alarm Function:
Door Held Open Alarm: 10~990
Door Forced Alarm
Panel Temper Alarm
Auxiliary reader Format: Wiegand 26~37 or 26-bit only
format (adjustable), hexadecimal (125KHz 26~37-bit R/O or
compatible)
Case Material: ABS (UL94V0)
Color: Dark gray/ Beige White
Operating Temperature: -20~+70C
Ambient Humidity: 5~95% relative humidity non-condensing
Visual Signals: 3 LED display with audible Indication
(Red/Yellow/Green)
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
GP001
to customersatisfaction.
Auxiliary reader
GEMPROX-H
125 KHz,Wiegand 26~37-bit
format output
Size:88(L) X 44(W)X16(D)mm
Connecting Diagram
DG-600H
Stand-alone Proximity Reader
The auxiliary reader must not be further than 50 meters from
the DG-600H. Also this reader should be nearer than 60
centimeters, to avoid disturbance. The suggested wire gauge
is #22~26 AWG. auxiliarySplit of units for DG-600H and
reader in ranging up to 50 M bring out the friendly system
device for low cost but high security with anti-tampering as
well as convenience and reliability.
Fail-Safe Lock
St 2 connect to 1-2
Fail-Secure Lock
St 2 connect to 2-3
Power supply
(9~16Vdc)
*Linear supply recommended
Insert 2-3 position to reset
DG-600H Jp1 leads to all Wiegand format
Contact door switch or the
electric lock signal output
Push Button
External relay start
the warning system
Auxiliary Reader
(Wiegand Format)
DG-600H Jp1 short-circuit to Wiegand 26 bits format
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright © 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-600H Ver.D Published on 2008.05.06
GP001
Connect to 1-2;C and D contact is N.C.
Connect to 2-3; for N.O.
Connect to 1-2;C and A contact is N.C.
Connect to 2-3; for N.O.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...