Gianni Industries DG-600E, EM-400x User Manual
DG-600E
Stand-alone Proximity Reader
Features
Allows up to 600 proximity cards and PIN codes
125 KHz Frequency EM-400x
compatible chip
Tamper switch and alarm buzzer included
Fully Programmable via keypad and master code
Access mode selectable: card only
card or PIN card+PIN
；
；
Supports Wiegand 26/44-bit format auxiliary reader
Logical memory to prevent duplication
Invalid PIN Lock-out
Beeper sound gives of keypad composition
Non-Volatile Memory
Removable memory chip replacement
Statement
providing single door access control, and ideal for small
controllers application. When DG-600E conjunction with
extended auxiliary reader Wiegand 44 / 26-bit format output
on outdoor for high security access control integration
nowadays and the future, it's designed to mounts on a
standard-single-gang electric wall box or on the surface of an
interior or exterior wall.
capacity in reading time max. 0.5 second. Each card is
presented to the Reader has to with PIN codes 5 digits
password attached for multi-authorized. Logical memory can
prevents unauthorized persons from gaining PIN codes entry
by trial and error, system will shut down 60 seconds while 5
times of incorrectly password attempted which would
eliminate any random application of card ID code
transmission. Beeper sound gives a proper way of keypad
composition for the system in any case to work it goes.
Enables various beeper and LED configurations, depending
on individual sit requirements.
to ensure vandal proof and suspend the time-delay overdue.
Programmed memory stored to the system for at least 10
years, nevertheless an incidentally power breaking down. The
DG-600E is highly reliable, warranted for life and capable of
providing the best read range in its class.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-DG-600E Ver.D Published on 2008.05.06
The DG-600E stand-alone Proximity Reader serial
DG-600E runs with 600 proximity cards and PIN codes
Build in tamper switch that turns on alarm relay activation
35.5
70
1
2
3
4
5
6
7
8
9
*
0
#
127.5
Unit: mm
Specifications
Operating Voltage: DC +9V to 16V
Current Draw: Average 50mA, Peak 100mA@ 12Vdc
Transmitting Frequency: 125 KHz,
EM-400x compatible chip
Memory Volume: 600 Proximity cards/tokens and PIN codes
Read Range: Up to 10 cm (Depending on local installation
conditions)
Keyboard: 12 digits keypad (0~9, *, #)
Input: Request-to-exit, door reed switch, auxiliary reader
Relay Electric Current: 2A MAX @30Vdc, 0.4A @120Vac
Invalid PIN Lock-out: The system will shut down for 60 seconds
while 5 times of incorrectly Master Codes enrolled or PIN codes
attempted (None beeper signal of keypad activations(
Relocking timer:
Strike Time: 1~99 seconds (adjustable)
Strike mode: Access Timer or Latch
Alarm Function:
Door Held OpenAlarm: 10~990
Door Forced Alarm
Panel Temper Alarm
Auxiliary Reader Format: Wiegand 44 or 26-bit only format
(adjustable), hexadecimal (Em 64-bit standard R/O or
compatible)
Case Material: ABS (UL94V0)
Color: Dark gray/ Beige White
Operating Temperature: -20~+70°C
Ambient Humidity: 5~95% relative humidity non-condensing
Visual Signals: 3 LED display with audible Indication
(Red/Yellow/Green)
EMC: Meet CE requirement
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Auxiliary reader
GEMPROX-E
125 KHz, Wiegand 26-bit
hexadecimal format output
Size:88(L) X 44(W)X16(D)mm
Connecting Diagram
DG-600E
Stand-alone Proximity Reader
The auxiliary reader must not be further than 50 meters from
the DG-600E. Also this reader should be nearer than 60
centimeters, to avoid disturbance. The suggested wire gauge
is #22~26 AWG. auxiliarySplit of units for DG-600E and
reader in ranging up to 50 M bring out the friendly system
device for low cost but high security with anti-tampering as
well as convenience and reliability.
Fail-Safe Lock
St 2 connect to 1-2
Fail-Secure Lock
St 2 connect to 2-3
Power supply
(9~16Vdc)
*Linear supply recommended
Insert 2-3 position to reset
DG-600E Jp1 leads to Wiegand 44 bits format
Contact door switch or the
electric lock signal output
Push Button
External relay start
the warning system
Auxiliary Reader
(Wiegand Format)
DG-600E Jp1 short-circuit to Wiegand 26 bits format
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-DG-600E Ver.D Published on 2008.05.06
Connect to 1-2;C and D contact is N.C.
Connect to 2-3; for N.O.
Connect to 1-2;C and Acontact is N.C.
Connect to 2-3; for N.O.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...