Gianni Industries DG-30 User Manual
DG-30
Digital Keypad / Proximity Entry System
Features
Allows upto 150 Proximity cards /tokens or PIN codes
Tamper SwitchIncluded
Door ReedSwitch Input for Anti-Trailing
Fully Programmablevia keypad and master code
Extendable fromkeypad only to proximity controller
Supports 26or 34-bit Wiegand auxiliary reader
Logical memoryto prevent duplication
Non-VolatileMemory
Invalid PINLock-out
Statement
The DG-30 digital keypad entry system is a Multi-purpose
keypad, extendable to proximity reader's controller (Wiegand
format). 150 group of user's capacity, control by two Relays:
Relay 1 is Induces the card or the password using the 001~100
group; Relay 2 is using 101~150 group password user, and
receives auxiliary reader Wiegand 34 or 26-bit format
(adjustable, hexadecimal).
Digital code-operated (anti-tamper) for indoor access control
keypad with up to 150 individual user PIN codes or 100
individual user cards and 50 user PIN codes, suitable for small
and medium-size businesses, multi-tenant residential and
commercial buildings, as well as clinics and health facilities.
The door reed switch is used to time out the timer when door is
moved. User access PINs ensure that all functions controlled
to authorized persons only. It mounts to any standard single
gang electrical box or directly to any wall.
The DG-30 providing single door access control, and
ideal for small controllers application. When host conjunction
with extended auxiliary reader on outdoors for high security
access control integration nowadays and the future, it's
designed to mount on a standard-single-gang electric wall box
or on the surface of an interior or exterior wall.
Logical memory can prevents unauthorized persons
from gaining PIN code entry by trial and error, host will shut
down 60 seconds while 5 times of incorrectly password
applied which would eliminate any random application of card
ID code transmission. Build in tamper switch that turns on
alarm relay activation to ensure vandal proof.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-DG-30 Ver.D Published on2008.05.06
35.5
70
1
2
3
4
5
6
7
8
9
*
0
#
127.5
Unit: mm
Specifications
Operating Voltage: 12 VDC
Current Draw: 60mAMax @12VDC
Input: request-to-exit, time out reed switch contact, auxiliary reader.
Relays Electric Current: 2A MAX @30Vdc , 0.4A@ 120Vac .
Memory Volume: 150 PIN codes or 100 Proximity cards/tokens and
50 PIN codes.
Format: 26 or 34-bit Wiegand hexadecimal.
Relay 1 is controlled by 001~100 user slots (Cards or PIN codes)
Relay 2 is controlled by 101~150 user slots (PIN codes(
PIN codes: 5 digit codes only
Case Material: ABS )UL94V0(
Operating Temperature: -20~+70°C
Ambient Humidity: 5~95% relative humidity non-condensing
Visual Signals:
Red: Power on
Green: Relay activated
Tri-color LED:
Yellow: Program Mode
Red: The slot is registered )Lock-out(
Green: This slot may register the card or PIN codes.
Factory Master Code: 12345
Invalid PIN Lock-out: The system will shut down for 60 seconds while
32 codes of incorrectly Master Codes enrolled or PIN codes
attempted.
EPROM:Non-volatile memory, System will retain all programs and
codes after a total loss of power.
Output: Dual relay, N.O./N.C./Com. Output (free voltage contact)
Tamper switch
Relay Activation Time:
Strike Time: 1~99 seconds
Strike mode: Access Timer or Latch
Colour: Dark gray/ Beige White
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Auxiliary reader
The auxiliary reader must not be further than 50 meters from
the DG-30. Also this reader should be nearer than 60
centimeters, to avoid disturbance. The suggested wire gauge
is #22~26 AWG. auxiliarySplit of units for DG-30 and reader
in ranging up to 50 M bring out the friendly system device for
low cost but high security with anti-tampering as well as
convenience and reliability.
DG-30
Digital Keypad / Proximity Entry System
GEMPROX-H
125 KHz,Wiegand 26~37-bit
format output
GEMPROX-E
125 KHz,Wiegand 26-bit
format output
GEMPROX-26M
13.56 MHz,Wiegand 26-bit
format output, Mifare 1
compatible
Connecting Diagram
Door Reed Switch Input for Anti-Trailing
Contact door reed switch
This reed switchis used toreset the relocking time to 0 second when the door is
moved. (Using N.O. contact in case of
door closed, changeover to N.C. When
dooris moved)
FAIL-SAFE
LOCKING DEVICE
Auxiliary Reader
(Wiegand 26or
34-bit Format)
Power Supply
Push Button
Tamper switch
contact output
(free voltage
contact)
Tamper
Switch
To follow the
precedent of
Group 1 contacts
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-DG-30 Ver.D Published on2008.05.06
123
Re-setofall
system parameter
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...