Gianni Industries DG-100 User Manual

Keypad

Controller Board

DG-100
Digital Keypad

20

1

2

3

4

5

6

7

8

9

0

154

73

63

Unit: mm

Features

Split ofcontroller and keypad forhigh security
Allows upto 99 PIN codes
LED displaywith audible indication
Metal castinghousing with vandal resistantscrews
Non-VolatileMemory & Invalid PINLock-out
Fully Programmablevia keypad and mastercode
Random usercodes for anti-peeping
Deftly dimensionfor narrow jamb

Statement

DG-100

The is a split of keypad and controller board digital
code-operated for access control, allows up to 99 individual
user PINs, user access PINs ensure that all functions
controlled to authorized persons only.
controller board and keypad in ranging up to 50 M bring out the
friendly system device for low cost but high security with anti­tampering as well as convenience and reliability.

Advanced technology made of modern designed for deftly
dimension(keypad)featuring easy installation on to any door
stiles.

The memory and relay circuitry are located on the
controller board which can be installed in a secure location up
to 50 M away.

Split of units for

38.8

Specifications

Operating voltage: 12 VDC
Current draw: Holding: 15mA@12VDC

Output: relays N.O. / N.C./ Com. Output (dry contact)
Relay rating: 0.5A@125VAC
Relay strike time:

Strike time: 1~99 seconds

Strike mode: Access timer or latch
User codes capacity: 99 slots
PIN codes: 5 digit codes (4 digit codes available by special

order)
Operating temperature: -20~+70°C
Ambient humidity: 5~95% relative humidity non-

condensing
Master Code: Default value 12345 (or 1234)
Pressed key time delay: 30 seconds.
EPROM: Non-volatile memory, System will retain all

programs and codes after a total loss of power.
Cable Length: 2-meter (#22 AWG)
Weight:Approx 230g
Color: Beige white

Pull in: 70mA@12VDC

1A@24VDC ,

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: [phone] / Fax: [phone]

E-Mail: [e-mail]
Website: gianni.tw

Copyright 2009 Gianniindustries, inc. All rights reserved.
DM-CA-DG-100 Ver.E Published on 2009.11.27

Warranty

The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original client. The GEM policy
is one of continual development and improvement; therefore
GEM reserves the right to change specifications without
notice.

The products are manufactured under an ISO
9001 QC 080000 Certified Quality

&

Management Program environment back its
product quality, performance and commitment
to customersatisfaction.