Gianni Industries BTS-200, BTS-486 User Manual
Specifications
BTS Touch Sensitive Switch
Installation Instruction
Specifications
SPDT relay rating: 3A@ 125V~
Current: 60mA~100mA@12V DC
Power input :
Operating Temper.:
12~24 V DC
- 20~+70ºC
JP setting:
JP1: Relay output model
JP2: LED lighting or blinking setting
Jp3~5: LED brightness setting
Relay contact output
(free voltage contact)
12~24VDC power input
Relay output model
Connecting Diagram
Setting JP
1
2
3
4
5
control and LED
brightness setting
BTS-486
1
30
Relay
BTS-300 , 400-ANSI
Relay
Setting JP
Timer delay
(Seconds)
130
Relay output
Com. N. C.
Relay output
Com. N. O.
(Light islighting)
(Light isblinking.)
(Green)
(Red)
(Green)
(Red)
(Touched)
(Touched)
(Touched)
(Touched)
(Touched)
(Touched)
(Touched)
(Touched)
Relay output
Com. N. O.
Relay output
Com. N. C.
(Red)
(Green)
(Green)
(Red)
BTS-200 adds an extra
trigger for remote control
purpose; it has the same
effect as touching motion.
The diagrams below illustrate the two
recommended ways of installing the BTS Touch
Sensitive Switch and access control devices after
power input (power on).
In Fig. A, BTS directly controls the release of failsafe(Power to Lock) locking device.
BTS-200 adds an extra
trigger for remote control
purpose; it has the same
effect as touching motion.
In Fig. B, For fail-secure(Power to Unlock) locking
devices the contact on control device should be sat
to N.O. The relay time of BTS is the same as the
release time of locking device in both cases.
(Trigger)
Power Supply
(Trigger)
Power Supply
Control Device(Outdoor)
Relay output
control
Shorten
N.C.
Com.
N.O.
TR
TR
N.C.
Com.
N.O.
BTS Touch Sensitive Switch
(Indoor)
Control Device(Outdoor)
Relay output
control
Shorten
N.C.
Com.
N.O.
TR
TR
N.C.
Com.
N.O.
Fig. A
Fig. B
Locking Device
(fail-safe)
Locking Device
(fail-secure)
BTS Touch Sensitive Switch
(Indoor)
IMPORTANT NOTICE:
1. It is important to take extra notice on the maximum voltage and current output that the rated of relay contact to be used.
2.
Make sure that the "+" and "-" wire are connected correctly.
Copyright 200 GIANNI INDUSTRIES,INC. Allrights reserved.
P-MU-BTS200 L Published on 8 06 09
©8
Ver. 200 . .
Loading...