Gianni Industries AD-425S User Manual

EC862636

Statement

The AD-425S Automatic Door Operation is a reliable and quiet door opening and closing device. This product is ideal for enabling access to areas for people with disabilities or simply for convenience (ex: like hospital, old folk's home... and so on) . It is compact and can be used in combination with other devices such as microwave sensors or card readers to control operation.

AD-425S Automatic door operator

2

3

5

1

Specifications

Power Input

Current

Torque

Opening/Closing time

Hold-Open time

Battery Specification

Battery charge

Temperature

Degree of protection

Product weight

Dimensions

Wing dimensions

Motor specification

AC 110( or 220V)

3.5A max., 0.6A average (Motor)

30Nm

4.5~9.5 seconds 90（）

1~35 seconds

12V 1.2AH

12V=0.15A (Normal); 0.3A (Peak)

-20 ~+55 (Battery 5 ~40 )?? ??

IP12D

6.5 kg

Operator: 526(L) x 100(W) x 96(D) Arm: 375 (unit: mm)

Door wing width : 75~120 cm Door wing weight : 50~100 kg

Voltage: 8~24VDC Maximum current : 4A Output : 65W Frequency: 2400 RPM

13

14

1. Cover

2. Motor

3. Reducer

4. Square Couplings

5. Control Board

6. Battery

7. Power Switch

4

6

7

9

8. Operating Arm

9. Sliding Rail

10. Stopper Ball

11. Baseplate

12. Transformer

13. Encoder

14. Photocell

8

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678 Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876

E-Mail: info@gianni.com.tw Website: gianni.tw

The products are manufactured under an ISO 9001 QC 080000 Certified Quality

&

Management Program environment back its product quality, performance and commitment to customersatisfaction.

Features

AD-425S Automatic door operator

110/220V

Selectable dual voltage

The AD-425S operates on either 110V or 220V mains power such that it can be used almost anywhere in the world.

Allinone

The AD-425S has interfaces for up to six optional devices such as electromagnetic locks, press to open buttons, microwave sensors, card readers and other accessories.

Maintain-Open time

The door can be adjusted to open for a maximum of 35 seconds. This is suitable for both disabled and wheelchair users.

Quiet and Reliable

AD-425S is quiet and reliable when operating.

Selectable operating speeds

Four selectable operating speeds settings and two levels of torque output can be chosen based on the width and weight of the door.

Applicable for all doors

AD-425S can be mounted to open outwards or inwards and fits either left or right swinging doors.

Safety sensor

AD-425S incorporates a safety sensor. When an obstruction is detected the door will be returned to its previous open or closed position to prevent accidents.

High accuracy

A built in Photocell and encoder are used to control the action of the operating arm. Desired opening angle and appropriate braking distances can be accurately managed.

Wide Range

It is suitable for doors with width between 75 ~ 120 cm and weight between 50 ~ 100 kg .

※ See Figure Wing dimensions

Wing dimensions

Push&Gooption

AD-425S includes a switch to select between auto and manual mode. In manual mode, applying force to the door will activate the opening.

Remote controls

Can be used in conjunction with wireless remote controls.

Backup battery

In case of mains power failure, a backup battery can maintain normal opening and closing operations up to 250 times.

GIANNI INDUSTRIES, INC.

No. 13, Chung Sing Road,Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678

Tel: 886-2 2267 0322 / Fax: 886-2 2267 0323

E-Mail: info@gianni.com.tw Website: gianni.tw

B

A

10 20 30 40 50 60 70 80 11090 120100

Door wing width cm Door wing weight kg Service Class A: average of up to 600 cycles per day Service Class B: average of under 200 cycles per day

（）

The products are manufactured under an ISO 9001 QC 080000 Certified Quality

&

Management Program environment back its product quality, performance and commitment to customersatisfaction.

AD-425S Automatic door operator

Dimension

526

375

100

1

Unit: mm

Install AD-425S on an out-swing door, make sure that the distance between the header and leaf is not more than 60mm, and the space between the header and Sliding Rail mounting hole must be 60mm, on an in-swing door, make sure that the distance between Square Couplings and hinge is not more than 74mm , the space between header and the bottom of AD-425S must be 23mm, and the space between header and Sliding Rail mounting hole must be 39mm.

1

PUSHHOLDON

Refer to figure for in-swing door (right-hand).

96

0

OFFOPENGO

0

GEM

In-swing

Header

61mm

(Max.)60mm

74mm

In-swing

23mm

39mm

Out-swing

Header

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678 Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876

E-Mail: info@gianni.com.tw Website: gianni.tw

Stopper Ball

120°

Depending on the door leaf opening

The products are manufactured under an ISO 9001 QC 080000 Certified Quality

&

Management Program environment back its product quality, performance and commitment to customersatisfaction.

Application

AD-425S Automatic door operator

To mount the AD-425S depends on the direction way of the doors, out-swing, inswing, right- open and left-hand doors by adjusting the F/R switch and the direction of the Operating Arm.

Out-swing door Right / Left hand

Out-swing

AD-425S

Right-hand

AD-425S

GEM

Out-swing

Left-hand

GEM

Opening angle: 90 degrees.

Beginning Destination Brake for wall blanking function. VM action time is the opening and closing time.

TC Maintain time of 1-35 seconds

.

Open DoorOpen Door

Destination(TC Maintain time)

Brake

Beginning

e

m

i

t

n

o

i

t

c

A

M

V

In-swing door Right / Left hand

AD-425S

Right-hand

In-swing

GEM

Operating Arm turns clockwise or .counter-clockwise

AD-425S

Left-hand

GEM

In-swing

Close DoorClose Door

Destination

Brake

Beginning

t

c

A

M

V

e

m

i

t

n

o

i

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678 Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876

E-Mail: info@gianni.com.tw Website: gianni.tw

The products are manufactured under an ISO 9001 QC 080000 Certified Quality

&

Management Program environment back its product quality, performance and commitment to customersatisfaction.

Application

Motor

Relay

()Motor

Motor()

LED

(Motor)

Fuse

12V

1.2Ah

Battery

LED

( Charge)

(

Charge)

LED

(DCin)

(

DC in)

VM TC

Relay outputRelay output

AC15V inAC15V in

LED

Relay

Relay)

( Relay)

(

Relay

Lock()

1

REDA2

REDA1

AD-425S Automatic door operator

2

Microwave sensor switch

N.C.

N.O.

2

3

8

9

N.O.

Com.

1

2

3

8

9

DC PowerDC Power

Electric Locking Device

Power to LockPower to Lock

4

Power to OpenPower to Open

1

Access Control System

Relay outputRelay output

N. O.

Com.

3

Wireless Push Button

Relay outputRelay output

N. O.

Com.

2

GEM

4

In-swing

3

1

(Outdoor)

Max. 4.5 meter

0~7meter

Warranty

The product is warranted against defects in material and workmanship while used in normal service for a period of 5 year from the date of sale to the original customer. The GEM policy is one of continual development and improvement; therefore GEM reserves the right to change specifications without notice.

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678 Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876

E-Mail: info@gianni.com.tw Website: gianni.tw

Please refer to our website at http://gianni.tw to find out more details about the optional accessories instruction and other relevant documentation.

The products are manufactured under an ISO 9001 QC 080000 Certified Quality

&

Management Program environment back its product quality, performance and commitment to customersatisfaction.