Gianni Industries 10003F User Manual
Magnet
Armature
(Power Off)
Magnet
Armature
(On Power)
10003F Micro Face Mount
Water-Proof Electromagnetic Lock
Specifications
Voltage Tolerance: 15%
Current Draw: 300mA@12Vdc(at temperature 20C)
(Further notice for diverse input voltage on special order requirement)
Operating Temperature: -10~55C (14~131F)
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
(current temperature +20C )
Holding Force: Up to 300 lbs (136 Kg)
Dimensions:
Magnet:(L) 170, (W) 32, (D) 24 mm
Armature Plate:(L) 152, (W) 32, (D) 10 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 1.5 Kg
Optional Brackets
With Z-bracket for in-swinging doors
When there is no power, there will be no holding force, and the push-off button will
pop out immediately, to release the Electromagnetic Lock and the Armature Plate
for no residual magnetism.
Unique Anti-Residual design
Statement
The fail-safe Electromagnetic Lock design with no
mechanical parts but magnetic force to secure and release the
doors, suitable for use in areas which required access
controlled or egress such as Darkrooms, Cabinet...etc.
The Electromagnetic Locks are totally sealed in an epoxy
filled stainless steel case for water-resistant and vandalresistant purpose. A threaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even in severe weather.
10003F offers up to 300 pounds holding force with 12V DC
power input (24V DC input voltage available by special order).
It is the best choice for electronic security industry and system
integrators.
Z-150
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-10003F Ver. C Published on 2008.05.12
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...