Gianni DG-1000M User Manual
DG-1000M
Stand alone Access Controller
Convenient record listing of the user
card and password thru the connection
tothePCwithUSB.
Features
Allows up to 1000 proximity cards and PIN codes
Tamper switch and alarm buzzer included
Fully Programmable via keypad and master code
Access mode selectable:
card only card or PIN card+PIN
Logical memory to prevent duplication
Invalid PIN Lock-out
Beeper sound gives of keypad composition
Non-Volatile Memory
Removable memory chip replacement
Mifare High Frequency 13.56MHz
Stand-Alone Proximity Reader with USB Connector
Software Free of Charge
；；
35.5
70
1
2
3
4
5
6
7
8
9
*
0
#
127.5
Unit: mm
Overview
The DG-1000M offers one version request command and two
memory exchange commands. These memory commands,
used with knowledge of the EEPROM layout, allow almost
complete control over configuration, holder and transaction
memory. The exception to memory access is the
automatically-maintained memory contained within address
0x7000 and0x8000. This area contains checksums,
configuration backups and integrity markers to ensure the
validity of data on the unit.
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright © 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-1000M Ver.C Published on 2008.05.05
GP001
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Specifications
Operating Voltage: DC 12V
Current Draw: 95~140mA @12VDC
Memory Volume: Proximity cards
Keyboard: digits keypad
Transmitting Frequency:
Visual Signals:
Relocking timer:
Case Material: ABS UL94V0
Ambient Humidity:
Operating Temperature:
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
12 (0,9,*,#)
LED (
2A MAX @30Vdc 0.4A @ 120Vac
1000
13.56MHz
Red/Yellow/Green)
1~99 Seconds
（）
5%~95%
-20°C~+70°C
；Relay Electric Current:
USB Interface
DG-1000M
Stand alone Access Controller
A device driver has been provided, which when installed will
allow low-level communication between the host and the DG1000M device. This driver has been tested for Windows 2000
and Windows XP. A high level COM interface is also provided
which must be registered with Windows. This is a high-level
interface, and provides for easy access using application
software like Borland Delphi, Microsoft Visual Basic and any
others which support the Microsoft Windows COM technology.
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright © 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-1000M Ver.C Published on 2008.05.05
GP001
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...