Gianni DG-100 User Manual
Keypad
Controller Board
DG-100
Split Digital Keypad Entry System
20
1
2
3
4
5
7
9
6
8
0
154
73
63
Unit: mm
Features
Split ofcontroller and keypad forhigh security
5 (or4) digit codes
Allows upto 99 PIN codes
Deftly dimensionfor narrow jamb
Random usercodes for anti-peeping
Fully Programmablevia keypad and mastercode
LED displaywith audible indication
Non-VolatileMemory
Invalid PINLock-out
Metal castinghousing with vandal resistantscrews
Statement
DG-100
The is a split of keypad and controller board digital
code-operated for access control, allows up to 99 individual
user PINs, user access PINs ensure that all functions
controlled to authorized persons only.
controller board and keypad in ranging up to 50 M bring out the
friendly system device for low cost but high security with antitampering as well as convenience and reliability.
Advanced technology made of modern designed for deftly
dimension(keypad)featuring easy installation on to any door
stiles.
The memory and relay circuitry are located on the
controller board which can be installed in a secure location up
to 50 M away.
The system will shut down for 60 seconds while 30
codes of incorrectly Master Codes enrolled or PIN codes
attempted None beeper signal of keypad activations .Metal
die casting housing with vandal resistant screws to seize
every security measures of the unit.
()
Split of units for
38.8
Specifications
Operating Voltage: 12 Vdc
Current Draw: Average 15mA, Peak 70mA @ 12Vdc
Output: relays N.O. / N.C./ Com. Output (free voltage
contact)
Relays Rated: 2AMAX @30Vdc 0.4A @ 120Vac
Relay Activation Time:
Strike Time: 1~99 seconds
Strike mode: Access Timer or Latch
User codes capacity: 99 slots
PIN codes: 5 digit codes (4 digit codes available by special
order)
Operating Temperature: -20~+70°C
Ambient Humidity: 5~95% relative humidity non-
condensing
Factory Master Code: 12345 (or 1234)
Invalid PIN Lock-out: Shut down for 60 seconds.
Setting Mode delay Time: 60 seconds.
Pressed Key time delay: 30 seconds.
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
Colour: Beige White
Cable Length: 2-meter (#22 AWG)
Distance between the keypad and controller board:
Maximum 50 M (cable#22~26 AWG).
；
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-DG-100 Ver.D Published on 2008.05.06
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
Loading...