Instruction Manual
Model Ref: GCYS-B21
Single Induction Hob
GCYS-B2104032015
Index
Important Safety Information.........
Product Overview..........................
How to use....................................
Cooking Modes.............................
Troubleshooting Guide..................
Hints and Tips...............................
Cleaning and Maintencance.........
Aftersales Support.........................
02
03
04
05
05
06
06
07
01
Thank you for choosing the Cucina Single Induction Hob.
Remove all packaging material. You may wish to keep the packaging
for future use or storage for your appliance. Alternatively, dispose of
accordingly.
02
Important Safety Information
Read all of the instructions before using this appliance and keep safe for future
reference.
When using electrical appliances, basic precautions should always be followed,
including the following:
This appliance is for domestic use only. Do not use outdoors or on wet surfaces.
Do not handle the plug or appliance with wet hands.
Do not immerse the main body in water.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, if they have been given supervision or instruction concerning the use of
the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be performed by children without
supervision.
This product is not a toy.
Do not use the appliance if any parts appear to be faulty, missing or damaged.
Do not leave the appliance unattended when connected to the mains supply.
Always unplug from the mains supply before carrying out any cleaning, performing
user maintenance or changing accessories.
Do not use the appliance if it has been dropped or damaged in any way.
Check to ensure that the electricity supply matches that shown on the rating plate.
Only use the attachments/accessories supplied with the product or recommended
by Giani.
If the supply cord is damaged, it must be replaced by a qualified service agent in
order to avoid a hazard.
Only use this appliance for its intended domestic use. Giani Ltd will not accept
any liability if the appliance is subject to improper use, or failure to comply with
these instructions.
Never allow metal or metal coated objects other than correct induction pans to come
into contact with the top surface of the appliance. This will damage the appliance.
Do not cover the appliance when it is switched on.
Do not connect the appliance to an external timer or remote control system.
The hob surface can become very hot during use. DO NOT TOUCH hot surfaces.
Allow the hob to cool down completely before handling or moving.
The appliance should be positioned at least 10cm away from walls to maintain good
airflow.
The induction hob heats up very quickly, so place the food into the pan first before
switching on the hob. Heating an empty pan can discolour the metal and may warp
the base.
Always place the pan centrally on the glass. Do not use a pan with a base larger
than 26cm as the heat created may cause the plastic casings to deform.
03
Do not use a heat diffuser or place any other material between the hob and the pan
when in use.
If the glass hob surface is cracked, turn off the power immediately and do not use.
NOTE: Customers with implanted cardiac pacemakers or other electronic
medical implants should not use this product, due to the magnetic fields
produced by the appliance.
Product Overview
Only use flat-bottomed pans that are induction suitable with this hob. If you are
unsure whether the cookware you have is suitable for use with this hob test by
holding a magnet to the base of the pan. If the magnet sticks, the pan can be used
on this hob. If the cookware is not suitable, the hob will not detect the pan and the
error code E0 will be displayed along with a repeated beep.
Alternatively look for the Induction symbol on the packaging of the cookware to be
sure.
The induction hob is suitable for pans with a base diameter of 12cm – 26cm. Metal
cooking utensils are not recommended since they can be heated through the
induction hob if left in the pan during cooking and become extremely hot.
04
How to use
Turning the hob on and off
Plug the induction hob into the mains socket.
The induction hob will enter standby mode, the unit will beep once and the display
will flash.
Place the pan with food on the hob.
Press the ON/OFF button. The fan will start running.
The Induction hob will start cooking in the manual setting by default.
The temperature can be changed up or down as desired by pressing – or + button.
The setting can be changed by pressing the “Function” button.
To turn off the hob press the on/off switch.
The fan will run automatically for a minute to cool the hob. Do not switch off at the
mains or attempt any cleaning during this process or it may damage the glass surface.
Temperature
When the induction hob is switched on, it will default into the manual setting.
The temperature can be changed
manually by pressing + or – buttons.
To cycle through the presets, press the function button.
All of the preset functions are default to the maximum temperature for that function
(see Cooking Modes page 5). However the temperature can be reduce in each setting
apart from milk (which is the lowest temperature setting) for full control, by pressing
– button.
Timer
When the induction hob is switched on with a pan in place, the timer can be set.
Press the Timer/Pre. Button, this will display the time. The time can be increased by
pressing the + button, or – button to reduce the time in 1 minute intervals.
Hold down the Timer/Pre. Button to cycle through the times quicker.
When the required time is reached on the display, this will automatically start the
timing down process. The Induction hob will continue cooking for this set time. The
display will alternate between the time left and the temperature.
When the time has reached zero the unit will beep once and go into standby mode
displaying:
05
Cooking Modes
Troubleshooting Guide
Mode Maximum Temperature
Steam
Water
Milk
Stir Fry
Fry
Hot Pot
130
100
80
280
240
160
Error Code Possible Cause Solution
The pan is not compatible
Voltage supply too low
Voltage supply too high
Temperature control fault
Temperature control fault
Surface temperature is too high
Overheating
E0
E1
E2
E3
E4
E5
E6
Check that the pan is magnetic,
this will indicate if it is suitable
for the induction hob
Check power supply. Switch off
and switch on again
Check power supply. Switch off
and switch on again
Switch off and switch on again.
If problem persists please
contact retailer
Switch off and switch on again.
If problem persists please
contact retailer
Remove the pan and allow to
cool down fully
Check air vents for blockage
06
Hints and Tips
It may take a few uses to get used to how quick and efficient your induction hob is.
Manually cook on the first few uses without the timer so you can get used to the
product.
Start with a lower temperature setting than usual.
The hob may not look hot, but it could remain very hot so do not touch until
completely cool after cooking.
Cleaning and Maintenance
Unplug the induction hob and allow to cool completely before cleaning or storing
away.
To clean the unit and control panel, wipe with a clean, damp cloth and dry before
storing.
Do not use abrasive cleaners, steel wool or abrasive materials or detergents.
Never immerse the unit in water or any other liquid.
After Sales Support
If you need help using your Single Induction Hob, please contact Giani Ltd:
Tel: 0161 480 6204
Email: info@gianiuk.co.uk
Website: www.gianiuk.co.uk
(replacement instruction manuals are available to download)
06
info@gianiuk.co.uk
Loading...