Before First Use
• Remove all packaging
• Wash the parts: see ‘Cleaning’
• Carefully store any excess cord into the back of the Smoothie Blender
Using the Smoothie Blender
• Fit the sealing ring over the blade assembly
• Screw the plastic jar onto the blade unit
• Screw the tap assembly onto the plastic jar, then place on the power unit (check that the dispensing
tap lever is pointing upwards in the Off position)
• Place any liquid ingredients in the plastic jar (this includes fresh [not frozen] fruit, yoghurt, milk, and
fruit juices) These can be placed into the plastic jar to the level marked LIQUIDS for either 3 or 6
servings
• You can add frozen ingredients into the plastic jar ( this includes frozen fruit, frozen yogurt, ice cream
or ice) These can be added up to the level marked FROZEN INGREDIENTS for the corresponding
number of servings
• Place the lid over the plastic jar, ensuring it’s on sercurely
• Either push the cap into the lid or place the stirrer in the hole
• The stirrer can be used when blending thick mixtures or when large quantities of frozen foods are
used
• Press and hold the High button, this will start the mixing process. Then press the Pulse button to
allow the ingredients to blend until smooth
• Use the stirrer by moving it in an anti-clockwise direction
• Place a glass under the tap, press the Mix button and press down on the dispencing tap lever
(thinner drinks may dispense without having to switch on the power unit)
• Use the stirrer to assist when dispencing thick smoothie drinks. To help dispense the last amount of
a thick smoothie drink, add a few tablespoons of water to increase the flow.
• When the glass is full, release the lever and switch off.
Hints
• To make a thinner smoothie drink, add more liquid
• To make a thicker smoothie drink, add more frozen ingredients
• Before fitting the lid, push the solid ingredients into the liquid using the stirrer
• Use the PULSE button to operate the power unit in a start/stop action to control the texture of your
drink (take care as this automatically selects the higher speed and may cause the drink to be thrown
up the sides and onto the lid of the plastic jar)
• After blending, some drinks may not be completely smooth due to seeds or the fibrous nature of the
ingredients.
• Some drinks may separate on standing, therefore it’s best to drink them straight away. Separated
drinks should be stirred before drinking.
Important
• Never blend dry ingredients (eg spices, nuts) or run the Smoothie Blender empty
• Don’t use the blender as a storage container. Keep it empty before and after use
• Some liquids increase in volume and froth during blending (eg milk), so do not overfill and ensure
the lid is correctly fitted
3