5
Indicator lamp of working status
Troubleshooting
LED is red flashing
• Reset the M-Freedom.(press and hold Reset button until red LED turns on,
approximately 5 seconds) and reconnect.
• Make sure to input correct password of Wi-Fi network (Case matters).
• Make sure M-Freedom is in a simple Wi-Fi network environment, since network
interference under complicated network environment may result in connection failure.
• Make sure M-Freedom is in a place with good wireless Wi-Fi signal since too weak a
signal may cause connection failure.
• Make sure wireless router didn’t hidden the SSID, didn’t use the WEP / Share and WDS
setting.
• Please upgrade the router software to the latest version.
Solution to resolve the failure in displaying AirPlay/DLNA icon or
pushing music
• Reset the M-Freedom (press and hold Reset button until red LED turns on,
approximately 5 seconds); make sure M-Freedom function is OK in direct mode.
• Try to connect after restarting smart phone, tablet PC, PC, Mac, etc.
• Make sure the following senior settings have been enabled for the router:
multicast/DLNA/UPNP/WMM or restart the router.
• Make sure M-Freedom is in a place with clear wireless Wi-Fi signal since a complicated
network may cause connection failure.
• Make sure M-Freedom is in a place with good Wi-Fi signal since too weak a signal may
result in connection failure.
• As for DLNA mobile device, please make sure if the compatibility of DLNA software is
within the support list of help documents in the official website.
Intermittent or no audio
• Make sure that neither M-Freedom nor broadcasting software is silent or in low volume.
• Try to reconnect after restarting router, smart phone, tablet PC, PC, Mac, etc.
• Make sure M-Freedom is in a place with clear Wi-Fi network environment and good
Wi-Fi signal.
• Under router mode, make sure M-Freedom is started and is under the same network as