GGMM E2-200 Users Manual
E2-200 user manual
Control Panel
1 2 3 4 5 6
1. Power Button:
Press and hold for 3 seconds to Power on/Power off
Short press for Mode switch
2. Preset Button:
Press and hold for 3 seconds to set the current channel to your presets.
Short press to switch between your preseted channels.
3. Play/Pause Button
4. Volume Down / Last Button
Short press to volume down.
Press and hold for 3 seconds to switch to last song.
5. Volume Up / Next Button
Short press to volume up.
Press and hold for 3 seconds to switch to next song.
6. Talk Button:
Select Wi-Fi Mode, login your Amazon account in “GGMM-E Series” APP, short press
it to talk toE2.
Select Bluetooth Mode, when there is an incoming call, short press it to answer or
hang up, long press button to reject .
7. Power Indicator Light:
Flashing: Charging
Always on: Charging completed
Always automatically blink slowly: Battery capacityis less than 25%
Check the battery capacity when power off:
Blink slowly for 4 times: Battery capacityis 75%~100%
Blink slowly for 3 times: Battery capacityis 50%~75%
Blink slowly for 2 times: Battery capacityis 25~50%
8. ModeIndicator light
Blue flashing: Waiting for Wi-Fi connected
Blue on: Wi-Fi connected
White flashing: Searching for Bluetooth
White on: Bluetooth connected
Back Panel
910
9. Wi-Fi Connection button
Under Wi-Fi Mode：
Short press to connect to Wi-Fi
Press and hold for 5 seconds to restore factory settings
Under Bluetooth Mode：
Press to unpair the current Bluetooth device, and reenter the Bluetooth search status
10. Power interface
Wi-Fi Connection Mode
Step 1：Take out E2 unit and its accessories, connect to power adapter to automatically
power on,or press and hold the Power button for 3 seconds to power on,and make
sure E2 is in Wi-Fi mode (blue LED indicator blinks).
Step 2：Download and install the APP “GGMM-E Series”from App Storeor Google Play
Store,you can also scan the QR codes to install the App.
Step 3：Turn on Wi-Fi in the Settings of your smart device, select your Wi-Fi network and
input the password. Open the APP of “GGMM-E Series”, set the networking according to
prompts on the APP interface, Wi-Fi is successfully connected when blue LED of E2 is
Loading...