gfm V07LCD32 Owner's Manual

Download

Page 1

WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING OPTIONAL SETTING

INFORMATION

TROUBLESHOOTING

32” Digital / Analog

LCD TV

Owner’s Manual

V07LCD32

TO RECEIVE DIGITAL/ANALOG SIGNAL,

YOU MUST CONNECT ANTENNA.

HIGH-DEFINITION TELEVISION

A71F4UH__EN.indd 1A71F4UH__EN.indd 1 2007/05/24 14:12:102007/05/24 14:12:10

Page 2

NTRODUCTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

The important note is located on the rear of the cabinet.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

1. READ INSTRUCTIONS - All the safety and operating instructions

should be read before the appliance is operated.

2. RETAIN INSTRUCTIONS - The safety and operating instructions

should be retained for future reference.

3. HEED WARNINGS - All warnings on the appliance and in the

operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS - All operating and use instructions

should be followed.

5. CLEANING - Unplug TV from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and,

that for some specific reason, such as the possibility of the loss of an authorization code for a CAT V converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. ATTACHMENTS - Do not use attachments not recommended by

the TV manufacturer as they may cause hazards.

7. WATER AND MOISTURE - Do not use this TV near water, for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. ACCESSORIES - Do not place this T V on

an unstable cart, stand, tripod, bracket, or table. The T V may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV.

Any mounting of the appliance should follow

the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

AMEUBLES - Cet appareil ne doit être placé

que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’ installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

9. VENTILATION - Slots and openings in the

cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES - This TV should be operated only from the type

of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION - This TV is equipped with a

polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. POWER-CORD PROTECTION - Power-supply cords should be

routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or

cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14. LIGHTNING - For added protection for this TV receiver during a

lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges.

15. POWER LINES - An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16. OVERLOADING - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

Important Safeguards

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

S2898A

GROUND CLAMPS

GROUNDING CONDUCTORS (NEC SECTION 810-21)

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

ANTENNA LEAD IN WIRE

A71F4UH__EN.indd 2A71F4UH__EN.indd 2 2007/05/24 14:12:132007/05/24 14:12:13

Page 3

INTRODUCTION

CONNECTION

INITIAL SETTING

OPTIONAL SETTING TROUBLESHOOTING

WATCHING TV INFORMATION

17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into

this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.

18. SERVICING - Do not attempt to service this TV yourself as opening

or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE - Unplug this TV from the wall

outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance, this

indicates a need for service.

20. REPLACEMENT PARTS - When replacement parts are required, be

sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21. SAFETY CHECK - Upon completion of any service or repairs to this

TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition.

22. HEAT - This TV product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Precautions

LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/T V technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

A71F4UH__EN.indd 3A71F4UH__EN.indd 3 2007/05/24 14:12:152007/05/24 14:12:15

Page 4

NTRODUCTION

If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.

•

Symbols Used in this Manual

The following is the description for the symbols used in this manual. Description refers to:

DTV

: Digital TV operation

: Analog TV operation

If neither symbol appears under the function heading, operation is applicable to both.

•

Note about recycling:

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

The serial number of this product may be found on the back of the unit. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

LOCATION

For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation:

Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. Install the unit in an upright position. Avoid locations subject to strong vibration. Do not place the unit near strong magnetic fields. Avoid moving the unit to locations where temperature differences are extreme. Be sure to unplug the AC power cord from the outlet before carrying the unit.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands. Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug. If, by accident, water is spilled on the unit, unplug the power cord immediately and take the unit to our authorized service center for servicing. Do not place anything directly on top of the unit.

•

Supplied Accessories

owner’s manual (1EMN22286A)

remote control (NF024UD)

batteries (AA x 2)

date of purchase

dealer purchase from

dealer phone No.

model No.

serial No

dealer address

A71F4UH_EN_v2.indd 4A71F4UH_EN_v2.indd 4 2007/07/11 17:46:372007/07/11 17:46:37

Page 5

INTRODUCTION

CONNECTION

INITIAL SETTING

OPTIONAL SETTING TROUBLESHOOTING

WATCHING TV INFORMATION

Contents5

DTV/TV/CATV

You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels.

Information Display (DTV only)

You can display the title, contents and other information of the current DTV program on the TV screen.

Auto Channel Scan

This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.

V-chip

This feature allows you to block children’s access to inappropriate programs.

Closed Caption Decoder

Built-in closed caption decoder displays text for closed caption supported programming.

MTS/SAP Tuner

Audio can be selected from the remote control.

Auto Shut Off Function

If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn off automatically.

Sleep Timer

This feature will automatically turned off the power of the unit at a specific time.

Choices for On-screen Language

Select your on-screen language: English, Spanish or French.

Stereo Sound Function PLL Frequency Synthesized Tuning

Provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons on the remote control.

Resume

This unit automatically memorizes settings if a power failure occurs.

HDMI Input Component Video Input S-video Input AV Input Digital Audio Coaxial Output

•

Features5

INTRODUCTION

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Remote Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CONNECTION

Basic Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

INITIAL SETTING

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

WATCHING TV

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Still Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Switching Each Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Switching Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Screen Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

TV Screen Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

OPTIONAL SETTING

Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Manual Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Antenna Confirmation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

DTV Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

CC Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

V-chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

HDMI Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

TROUBLESHOOTING

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

INFORMATION

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Other Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back cover

A71F4UH__EN.indd 5A71F4UH__EN.indd 5 2007/05/24 14:12:162007/05/24 14:12:16

Page 6

NTRODUCTION

Remote Control Function5

1. POWER button (p12) Press to turn the unit on and off.

2. Number buttons (p15)

Press to select channels.

button

Press to shift the minor channel from the major channel.

3. SETUP button (p13) Press to display the main menu.

4. s / B / K / L buttons (p12) Press to move left/ right/ up/ down through the items.

5. ENTER button (p12) Press to execute selected command in the menu.

6. BACK button (p18) Press to return to previous menu operation.

7. CH RETURN button (p15) Press to return to previous channel.

8. VOL. X / Y buttons (p15) Press to adjust the volume.

9. MUTE button (p15) Press to turn the sound on and off.

10. INPUT SELECT button (p16) Press to access connected external device like a DVD player or VCR.

•

11. SLEEP button (p20) Press to activate the sleep timer.

12. AUDIO button (p17)

Digital Mode (DTV)

Press to select the audio language.

Analog Mode (TV)

Press to select the audio mode.

13. STILL button (p16) Press to pause screen image.

14. SCREEN MODE button (p19) Press to select aspect ratio available for the TV screen.

15. INFO button (p18)

Digital Mode (DTV)

Press to display the channel information, signal type and TV setting.

Analog Mode (TV)

Press to display the channel number, signal type and TV setting.

External Input Mode

Press to display the external input mode, signal type and TV setting.

16. CH K / L buttons (p15) Press to select channels and the external input mode.

•

Installing the Batteries

Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

A71F4UH__EN.indd 6A71F4UH__EN.indd 6 2007/06/11 10:32:452007/06/11 10:32:45

Page 7

INTRODUCTION

CONNECTION

INITIAL SETTING

OPTIONAL SETTING TROUBLESHOOTING

WATCHING TV INFORMATION

INPUT SELECT

SETUP

POWER

VOLUME

CHANNEL

Control Panel5

side of this unit

1. POWER button (p12) Press to turn the unit on and off.

2. INPUT SELECT button (p16)

Press to access a connected external device like a DVD player or VCR. Press to execute selected command in the menu.

3. CHANNEL K / L buttons (p15) Press to select channels or move up/down through the main menu items.

4. VOLUME X / Y buttons (p15) Press to adjust the volume or move right (X) / left (Y) through the main menu items.

5. SETUP button (p13) Press to display the main menu.

6. Infrared Sensor Window

Receives infrared rays transmitted from the remote control.

•

1. HDMI IN jack (p9) HDMI connection for an HDMI device.

2. AUDIO IN jacks (p9) RCA audio cable connection for a DVI device. (For HDMI IN jack only)

3. AUDIO OUT jacks (p11) RCA audio cable connection for an external device. Use analog audio input jacks of an external device.

4. DIGITAL AUDIO OUT (COAXIAL) jack (p11) Digital audio coaxial cable connection for a decoder or an audio receiver. Use digital audio input jack of an external device.

5. ANT. IN jack (p8) RF coaxial cable connection for your antenna or cable/satellite box.

6. AC power cord

Connect to a standard AC outlet to supply power to this unit.

7. AUDIO input jacks (p10) RCA audio cable connection for an external device.

8. VIDEO input jack (p11) RCA video cable connection for an external device.

9. S-VIDEO input jack (p10) S-video cable connection for an external device.

10. COMPONENT and AUDIO input jacks (p10) Component video cable and RCA audio cable connection for an external device. Use component video and audio output jacks of an external device.

Rear Panel5

VIDEO 2

AUDIO

VIDEO

S-VIDEO

COMPONENT 1

VIDEO 1

AUDIO

PbPrL

AUDIO

S VIDEO VIDEO

COMPONENT 2

AUDIO

PbPrL

4 5

rear of this unit

side of this unit

A71F4UH__EN.indd 7A71F4UH__EN.indd 7 2007/07/10 18:10:462007/07/10 18:10:46

Page 8

ONNECTION

Basic Connection

This section describes how to connect the unit to an antenna, cable/satellite box, etc.

Note:

• Be sure your antenna or other device is connected properly before plugging in the power cord.

[Antenna Cable Connection]

When connecting the unit to an antenna or cable TV company (without cable/satellite box) Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to “Initial Setup” on page 12.)

Note:

• For your safety and to avoid damage to device, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than settop versions.

• To easily switch your reception source between antenna and cable, install an antenna selector.

• If you connect to the cable system directly, contact the CAT V installer.

[Connection to Cable Box or Satellite Box]

Connect the RF coaxial cable on your home outlet to the input jack of the cable/satellite box. Use another RF coaxial cable to connect the antenna input jack of the unit to the output jack of the cable/satellite box.

RF OUTANT. IN

Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider.

Cables not included.

Must be purchased separately.

e.g.)

VHF / UHF antenna

RF coaxial cable

rear of this unit

cable TV company

e.g.)

satellite

dish

cable/satellite box

rear of this unit

cable TV company

RF coaxial cable RF coaxial cable

A71F4UH__EN.indd 8A71F4UH__EN.indd 8 2007/07/10 18:10:482007/07/10 18:10:48

Page 9

WATCHING TVINTRODUCTION

CONNECTION

INITIAL SETTING

OPTIONAL SETTING TROUBLESHOOTING

INFORMATION

External Device Connection

[HDMI Connection]

HDMI (High Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to TV is of the highest possible resolution.

HDMI OUT

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals.

• This unit accepts only 2 channel audio signal (LPCM).

• You need to select “PCM” for the digital audio output of the device connected or the HDMI audio setting. There may be no audio output if you select “Bitstream”, etc.

• This TV only accepts signals compliant with EIA861.

[HDMI-DVI Connection]

If your video device has a DVI output jack, connect using a HDMI-DVI conversion cable.

DVI OUT

AUDIO OUT

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

• An HDMI-DVI conversion cable requires a separate audio cable connection as well.

• Audio signals are converted from digital to analog for this connection.

• DVI does not display 480i image that is not compliant with EIA/CEA-861/861B.

Cables not included.

Must be purchased separately.

rear of this unit

To HDMI - IN jack

HDMI cable

DVD player with the HDMI output jack

e.g.)

rear of this unit

To HDMI - IN jack

HDMI-DVI conversion cable

To AUDIO IN jacks

e.g.)

Cable box or satellite box with the DVI output jack

RCA audio cable

A71F4UH__EN.indd 9A71F4UH__EN.indd 9 2007/07/10 18:10:502007/07/10 18:10:50

Page 10

ONNECTION

[Component Video Cable Connection]

Component video connection offers better picture quality for video devices connected to the unit. Use a component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s COMPONENT 1 video input jack, connect RCA audio cables to the audio L/R jacks of COMPONENT 1. If you connect to the unit’s COMPONENT 2 video input jack, connect RCA audio cables to the audio L/R jacks of COMPONENT 2.

COMPONENT VIDEO OUT

PrPbY

AUDIO OUT

COMPONENT 1

VIDEO 1

AUDIO

PbPrL

AUDIO

S VIDEO VIDEO

COMPONENT 2

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

[S-video Cable Connection]

S-video connection offers good picture quality for video devices connected to the unit. Use an S-video cable to connect the unit to external video devices equipped with S-video output jack. If you connect to the unit’s VIDEO 1 S-video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO 1. If you connect to the unit’s VIDEO 2 S-video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO 2.

AUDIO OUT

S-VIDEO

OUT

COMPONENT 1

VIDEO 1

AUDIO

PbPrL

AUDIO

S VIDEO VIDEO

COMPONENT 2

Y R

Note:

• If you connect to the S-video jack and the video jack at the same time, the S-video connection will have priority.

Cables not included.

Must be purchased separately.

e.g.)

DVD player with the component video output jacks

component video cable

RCA audio cable

rear of this unit

(red)(blue)(green)

e.g.)

DVD player with the S-video output jack

rear of this unit

S-video cable

RCA audio cable

(red)

(blue)

(green)

A71F4UH__EN.indd 10A71F4UH__EN.indd 10 2007/07/10 18:10:522007/07/10 18:10:52

Page 11

WATCHING TVINTRODUCTION

CONNECTION

INITIAL SETTING

OPTIONAL SETTING TROUBLESHOOTING

INFORMATION

[Video Connection]

Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s VIDEO 1 video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO 1. If you connect to the unit’s VIDEO 2 video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO 2. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack.

COMPONENT 1

VIDEO 1

AUDIO

PbPrL

AUDIO

S VIDEO VIDEO

COMPONENT 2

Y R

AUDIO OUT

VIDEO

OUT

Note:

• If you connect to the S-video jack and the video jack at the same time, the S-video connection will have priority.

[Audio Output Connection] [Digital (for digital broadcasting only)]

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound.

[Analog]

If you connect this unit to an external analog audio device, you can enjoy stereo (2 channel) audio.

DIGITAL AUDIO

COAXIAL IN

AUDIO IN

Cables not included.

Must be purchased separately.

e.g.)

camcorder video game

VCR

RCA video cable

RCA audio cable

rear of this unit

e.g.)

Stereo system

e.g.)

Dolby Digital decoder

RCA audio cable

To AUDIO OUT

jack

digital audio coaxial cable

To DIGITAL AUDIO OUT jack

rear of this unit

A71F4UH__EN.indd 11A71F4UH__EN.indd 11 2007/07/10 18:10:522007/07/10 18:10:52

Page 12

NITIAL SETTING

Initial Setup

This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and auto channel scan, which automatically scans and memorizes viewable channels.

Before you begin:

Make sure if the unit is connected to antenna or cable.

After making all the necessary connections, press [POWER] to turn on the unit.

This operation may take a few moments.

Use [Cursor K / L] to select the on-screen language from the choices on the right side of the TV screen. (English / Español / Français)

Initial Setup

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

Select Enter Exit

SETUP

Español

Français

ENTER

English

“Initial Setup” menu on step 3 will be displayed in the selected language after you press [ENTER].

Use [Cursor K / L] to select “Air” for TV channels or “Cable” for CATV channels, then press [ENTER].

Initial Setup

Air

Cable

Select Enter Exit

SETUP

Back

BACK

ENTER

Make sure the antenna is connected to "ANT.IN" jack. Select the destination of "ANT.IN" jack.

Air

Cable

ANT.IN

Scanning and memorizing of channels start automatically.

Initial Setup

Now the system is scanning for channels,please wait.

Exit

SETUP

Analog channels 1ch

Digital channels 0ch

When the scanning and memorizing are completed, the lowest memorized channel in the broadcasting will be displayed.

•

Note:

• If you connect the cable system directly, contact the CAT V installer.

• If you press [POWER] or [SETUP] during auto channel scan, this setting will be canceled.

• The initial auto channel scan function can be executed for either “Air” or “Cable” only once. When you change the connection (Air/Cable), set auto channel scan again. (Refer to page 13.)

• You can cancel or exit the initial auto channel scan menu by pressing [SETUP].

• If there is no signal input from the antenna terminal and no operation for several seconds after you turn on the unit, “Helpful Hints” appears. Follow the instructions listed on the TV screen.

No channel is registered. Press and hold "ENTER" key on the remote control for 3 seconds. Contact support hotline provided on manual or back of unit.

Sin canal registrado. Pulse durante 3 segundos la tecla "ENTER" en el control remoto. Llame teléfono de apoyo en manual o atrás de TV.

Pas de chaîne consign. Enfoncez "ENTER" 3 secondes sur la télécommande. Contacter numero d'urgence dans manuel ou arrière appareil.

2-2

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

A71F4UH__EN.indd 12A71F4UH__EN.indd 12 2007/05/24 14:12:242007/05/24 14:12:24

Page 13

WATCHING TVINTRODUCTION CONNECTION

INITIAL SETTING

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

Main Menu

This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.

Press [SETUP].

EXIT

To exit settings.

PICTURE

You can adjust the picture quality. (Refer to “Picture Adjustment” on page 23.)

CHANNEL

You can automatically scan the viewable channels and remove those that are undesired. (Refer to “Auto Channel Scan” on page 13.)

DETAIL

You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen. (Refer to “Closed Caption” on page 24.) Set the viewing limitations. (Refer to “V-chip” on page 28.) And select the sound input for the HDMI jack if your TV is connected to a HDMI device. (Refer to “HDMI Audio” on page 31.)

LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu. (Refer to “Language Selection” on page 14.)

•

Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.

Before you begin:

Make sure if the unit is connected to antenna or cable.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “CHANNEL” , then press [ENTER].

Use [Cursor K / L] to select “Autoscan”, then press

[ENTER].

Channel

Autoscan

Channel List

Manual Register

Antenna

Use [Cursor K / L] to select an appropriate option, then press [ENTER].

Autoscan

Autoscan will rescan all channels. This may take a while to complete.

Select the destination of "ANT.IN" jack.

Back

Air

Cable

Cable 1hour

Air

Cable

ANT.IN

When aerial antenna is connected, select “Air”. When connected to CATV, select “Cable”. Scanning and memorizing of channels start automatically.

Now the system is scanning for channels, please wait.

Exit

SETUP

72%

Analog channels 10ch

Digital channels 6ch

When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

•

A71F4UH__EN.indd 13A71F4UH__EN.indd 13 2007/05/24 14:12:252007/05/24 14:12:25

Page 14

NITIAL SETTING

Note:

• If you connect the cable system directly, contact the CAT V installer.

• If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled.

• Channel settings will be saved even if the power fails.

• If you need the English menus instead of the Spanish or French menus you are having, press [SETUP]. Use

[Cursor K

/ L] to select “IDIOMA” or “LANGUE”, then press

[ENTER]. Use [Cursor K / L] to select “English”, then press [ENTER]. Press [SETUP] to exit the main menu.

• With regard only to the digital channel, even after the scanning is complete if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost.

Language Selection

You can choose English, Spanish, or French as your on-screen language.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “LANGUAGE”, then press [ENTER].

Use [Cursor K / L] to select “English”, “Español” or “Français”, then press [ENTER].

Language

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

Español

Français

English

Press [SETUP] to exit.

A71F4UH__EN.indd 14A71F4UH__EN.indd 14 2007/05/24 14:12:262007/05/24 14:12:26

Page 15

ATCHING TV

WATCHING TV

INTRODUCTION

CONNECTION INITIAL SETTING OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

Channel Selection

Select channels by pressing [CH K / L] or [the Number buttons].

To select the memorized channels, use [CH

L] or

[the Number buttons]. To select the non-memorized channels, use

[the Number buttons].

To Use [the Number buttons]

When selecting analog channel 12

DTV

When selecting digital channel 12-1 Be sure to press [–] before entering the minor channel number.

Press [CH RETURN] to return to the previously viewed channel.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality.

What is the minor channel?

By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network.

18:00

18:30

19:00

19:30

20:00

20:30

Note:

• “No Signal” will appear on the TV screen after the minor channel broadcast is over.

•

Volume Adjustment

This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described.

Use [VOL.

] to adjust the audio volume.

Volume 20

The volume bar will be displayed at the bottom of the TV screen when adjusting the volume. The volume bar display will automatically disappear in a few seconds.

Press [MUTE ] to turn off and on the sound.

Mute

“Mute” is displayed on the TV screen for a few seconds.

Press [MUTE ] again or [VOL.

] to recover the

original volume.

•

NTSC (analog mode)

[Air Time]

ATSC (digital mode)

major channel

minor channel : change automatically : change manually by using [CH

K / L]

CH4

No signal

CH4-1

CH4-2

No signal

CH4

(high definition TV)

CH4-1

A71F4UH__EN.indd 15A71F4UH__EN.indd 15 2007/05/24 14:12:272007/05/24 14:12:27

Page 16

ATCHING TV

Still Mode

You can freeze the image shown on the TV screen.

Press

[STILL] to pause the image shown on the screen.

Still

The sound output will not be paused. If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted. The still function will be released after 5 minutes.

To cancel still mode, press any button except [POWER].

•

Switching Each Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit.

Press [INPUT SELECT] or [CH K] repeatedly to cycle through the input modes.

Video1

Video2

Component1

Component2

HDMI

Pressing [CH L] reverses the direction of the mode. To use the video or S-video input jack of VIDEO 1 on the unit, select “Video1”. To use the video or S-video input jack of VIDEO 2 on the unit, select “Video2”. To use the component video input jack of COMPONENT 1 on the unit, select “Component1”. To use the component video input jack of COMPONENT 2 on the unit, select “Component2”. To use the HDMI - IN jack on the unit, select “HDMI”.

•

TV/DTV channel

A71F4UH__EN.indd 16A71F4UH__EN.indd 16 2007/05/24 14:12:282007/05/24 14:12:28

Page 17

WATCHING TV

INTRODUCTION

CONNECTION INITIAL SETTING OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

Switching Audio Mode

This section describes how to switch the audio language.

Press [AUDIO] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

SAP / STEREO

When all audio are available

SAP / STEREO SAP / MONO

SAP / STEREO

When stereo and monaural audio are available

MONO / STEREO MONO / STEREO

When SAP and monaural audio are available

SAP / MONO SAP / MONO

When only monaural audio is available

MONO

STEREO : Outputs stereo-audio SAP : Outputs second audio program MONO : Outputs mono-audio

The information display will automatically disappear in a few seconds.

•

DTV

Press [AUDIO] to display the currently selected language and the number of available languages.

6-1

English 1/3

Press [AUDIO] repeatedly to cycle through the available audio languages.

Available languages differ depending on the broadcast. “Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. The information display will automatically disappear in a few seconds.

Note:

• Pressing [AUDIO] does not control external audio device.

•

(Cannot be switched)

A71F4UH__EN.indd 17A71F4UH__EN.indd 17 2007/05/24 14:12:292007/05/24 14:12:29

Page 18

ATCHING TV

Screen Information

You can display the currently selected channel or other information such as the audio mode on the TV screen.

In the analog mode, the current channel number and the audio mode are displayed.

Press [INFO].

SAP / STEREO

TV-PG DLSV

480i

4:3

The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV rating are displayed at the top-right corner of the TV screen. To clear the display, press [INFO] again. You can also press [BACK].

•

DTV

In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed.

Press [INFO] to display the details of the currently selected program.

[Broadcasting Information]

The following information is displayed.

1 program title 2 broadcast station 3 program guide

(The program guide added to broadcasting information is displayed. Maximum display of 4 lines.)

4 channel number 5 audio language

(Refer to “Switching Audio Mode” on page 17.)

6 effective scanning lines and scan mode 7 program format 8 program aspect ratio 9 program rating 10 CC (not available if CC is set to “Off”)

6-1

English 1/2

TV-PG DLSV

1080i

16:9

16:9HDHD

A Day of Memories

KABC

A quarter-century ago,which may now qualify as the good old days of newspapering,run-of-paper sales accounted for 80 percent of the industry's advertising revenues.Department stores and supermarket were

6, 7, 8

Note:

• When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll.

• “No description provided” is displayed when the program guide is not provided.

• While the program guide is displayed, the closed caption function is interrupted.

• In external input mode, the following screen is displayed; e.g.) When an external device is connected to VIDEO 1

input jack.

Video1

TV-PG DLSV

480i

480iSDSD

• The information display will automatically disappear in 1 minute.

•

A71F4UH__EN.indd 18A71F4UH__EN.indd 18 2007/05/24 14:12:302007/05/24 14:12:30

Page 19

WATCHING TV

INTRODUCTION

CONNECTION INITIAL SETTING OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

TV Screen Display Mode

4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal.

Press [SCREEN MODE ] repeatedly to switch the TV aspect ratio.

For 4:3 video signal

[Sidebar]

Display a 4:3 picture at its original size. Sidebars appear on both edges of the screen.

[Full]

Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fill the screen.

[Cinema]

Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically to fill the screen. This crops out the top and bottom of the picture.

[Wide]

Display the picture with its center at the original size and the edges stretched horizontally.

For 16:9 video signal

[Full]

Display a 16:9 picture at its original size.

[Zoom]

Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio.

[Cinema]

Display a vertically stretched picture.

[Expand]

Display a horizontally stretched picture.

Note:

• You may not switch the display mode depending on the program.

Sidebar

(normal)

Full

Wide

Cinema

Full

(normal)

Zoom

Expand

Cinema

A71F4UH__EN.indd 19A71F4UH__EN.indd 19 2007/05/24 14:12:302007/05/24 14:12:30

Page 20

ATCHING TV

Sleep Timer

The sleep timer can be set to automatically turn off the unit after an incremental period of time.

Press [SLEEP] to set the sleep timer.

Sleep

Off

Sleep timer display appears on the TV screen.

Press [SLEEP] repeatedly to change the amount of time until shut off.

Sleep

120min.

You can set your unit to turn off after a set period of time (from 30 to 120 minutes). Each press of [SLEEP] will increase the time by 30 minutes. After set up, the sleep timer display can be called up for checking by pressing [SLEEP].

To Cancel the Sleep Timer

Press [SLEEP] repeatedly until “Sleep Off” is displayed on the TV screen.

Note:

• The sleep timer setting display will automatically disappear in a few seconds.

• When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

•

A71F4UH__EN.indd 20A71F4UH__EN.indd 20 2007/05/24 14:12:312007/05/24 14:12:31

Page 21

PTIONAL SETTING

WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

Channel List

The channel list function lets you remove undesired channels from the channel registration list.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “CHANNEL”, then press [ENTER].

Use [Cursor K / L] to select “Channel List”, then press

[ENTER].

Channel

Autoscan

Channel List

Manual Register

Antenna

Use [Cursor K / L] to select the channel you want to remove, then press [ENTER].

Channel List

DTV 8

DTV 48

DTV 6

DTV 67

Ch Select Watch/Skip Back

BACK

ENTER

Highlight channels for Ch Up/Down key selection.

The channel display for the removed channel darkens. You will not be able to select the channel again using [CH K / L]. To reactivate a removed channel, highlight it using [Cursor K / L] and press [ENTER]. The channel display lightens. When you remove a major channel, its minor channels are removed as well.

Note:

• The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

Press [SETUP] to exit.

•

Manual Register

The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “CHANNEL”, then press [ENTER].

Use [Cursor K / L] to select “Manual Register”, then press [ENTER].

Channel

Autoscan

Channel List

Manual Register

Antenna

Use [the Number buttons] to enter the number of the channel you want to add, then press [ENTER].

Manual Register

For analog channels, select a channel to register using number keys. For digital channels, you must perform Autoscan function.

Ch Change

Back

BACK

Press [SETUP] to exit.

Note:

• If set up completes successfully, “Registered to the Channel List” is displayed.

• If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

A71F4UH__EN.indd 21A71F4UH__EN.indd 21 2007/05/24 14:12:322007/05/24 14:12:32

Page 22

PTIONAL SETTING

Antenna Confirmation

This function lets you check the signal strength of each channel.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “CHANNEL”, then press [ENTER].

Use [Cursor K / L] to select “Antenna”, then press [ENTER].

Channel

Autoscan

Channel List

Manual Register

Antenna

Use [the Number buttons] or [CH K / L] to select the channel for which you want to check the signal strength.

Antenna

Back

Ch Change

Now 0 0 Peak

If the channel is set to external input, you cannot confirm the antenna condition.

Antenna

Back

Ch Change

Video1

Indicator is available for antenna signal only.

Press [SETUP] to exit.

•

A71F4UH__EN.indd 22A71F4UH__EN.indd 22 2007/05/24 14:12:342007/05/24 14:12:34

Page 23

WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “PICTURE”, then press [ENTER].

Use [Cursor K / L] to select the item you want to adjust, then press [ENTER].

Picture

Picture Mode

Brightness

Contrast

Color

Tint

Sharpness

Reset Settings

Color Temp.

Energy Saving

Dynamic

Neutral

Off

Adjust the picture quality.

Picture Mode

Use [Cursor K / L] to select the desired setting, then press [ENTER]. (Standard, Dynamic, Movie and News)

Picture

Picture Mode

Brightness

Contrast

Color

Tint

Sharpness

Reset Settings

Color Temp.

Energy Saving

Standard

Dynamic

Movie

News

Brightness, Contrast, Color, Tint, Sharpness Use [Cursor

] to adjust.

Cursor

Brightness

Adjust

Brightness 30

Move

Enter

ENTER

to decrease brightness

to increase brightness

Contrast

Adjust Move

Enter

ENTER

Contrast

to decrease contrast

to increase contrast

Color

Adjust Move

Enter

ENTER

Color

to decrease color

to brighten color

Tint

Adjust Move

Enter

ENTER

Tint

to add red to add green

Sharpness

Adjust Move

Enter

ENTER

0Sharpness

to make soft to make clear

Reset Settings

Use [Cursor K / L] to select “Reset”, then press [ENTER] to restore the “Picture Mode” setting to default.

Reset Settings

This function resets the "Dynamic" setting for Picture Mode to factory default.

Cancel

Reset

Color Temp.

Use [Cursor K / L] to select the desired setting, then press [ENTER]. (Cool, Neutral and Warm)

Picture

Picture Mode

Brightness

Contrast

Color

Tint

Sharpness

Reset Settings

Color Temp.

Energy Saving

Cool

Neutral

Warm

Energy Saving Use [Cursor

] to adjust the brightness of the backlight.

Adjust

Energy Saving Off

Enter

ENTER

Note:

• To cancel picture adjustment, press [SETUP].

Press [SETUP] to exit.

: To brighten

: To darken

A71F4UH__EN.indd 23A71F4UH__EN.indd 23 2007/05/24 14:12:352007/05/24 14:12:35

Page 24

PTIONAL SETTING

Closed Caption

You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “DETAIL”, then press [ENTER].

Use [Cursor K / L] to select “Closed Caption”, then press [ENTER].

Detail

Auto

Closed Caption

V–chip

HDMI Audio

Use [Cursor K / L] to select “Conventional CC”, then press [ENTER].

Closed Caption

Off

Conventional CC

DTV CC

CC Style

Use [Cursor K / L] to select the desired closed caption, then press [ENTER].

Closed Caption

DTV CC

CC Style

Conventional CC Off

CC1

CC2

CC3

CC4

Text1

Text2

Text3

Text4

[Caption Mode] CC1 and Text1;

are the primary caption and text services. The captioning or text is displayed in the same language as the program’s dialogue (up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture).

CC3 and Text3;

serve as the preferred data channels. The captioning or text is often a secondary language.

CC2, CC4, Text2 and Text4;

are rarely available and broadcasters use them only in special conditions, such as when “CC1” and “CC3” or “Text1” and “Text3” are not available.

There are 3 display modes according to programs:

Paint-on mode:

Displays input characters on the TV screen immediately.

Pop-on mode:

Once characters are stored in memory, they are displayed all at once.

Roll-up mode:

Displays the characters continuously by scrolling (max. 4 lines).

Press [SETUP] to exit.

Note:

• To show the closed caption on your TV screen, broadcast signal must contain the closed caption data.

• Not all TV programs and commercials have the closed caption or all types of the closed caption.

• Captions and texts may not match the TV voice exactly.

• Changing channels may delay the closed caption for a few seconds.

• Adjusting or muting the volume may delay the closed caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a problem with the unit.

• The caption or text characters will not be displayed while the main menu or functions display is shown.

• If a black box appears on the TV screen, this means that the closed caption is set to the text mode. To clear the box, select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.

• If the unit receives poor quality television signals, the captions may contain errors, or there might be no captions at all. Some possible causes of poor quality signals are:

- Automobile ignition noise

- Electric motor noise

- Weak signal reception

- Multiplex signal reception (ghosts or screen flutter)

• The unit retains the closed caption setting if the power fails.

• Closed caption will not be displayed when you are using an HDMI connection.

• When the unit receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the unit may not display the correct caption or text.

•

A71F4UH__EN.indd 24A71F4UH__EN.indd 24 2007/05/24 14:12:372007/05/24 14:12:37

Page 25

WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

DTV Closed Caption

DTV

In addition to the basic closed caption described on page 24, DTV has its own closed caption called DTV CC. Use this menu to change the settings for DTV CC.

Press [SETUP] to display the main menu.

Use [Cursor

L] to select “DETAIL”, then press

[ENTER].

Use [Cursor

L] to select “Closed Caption”, then

press [ENTER].

Detail

Closed Caption

Auto

V–chip

HDMI Audio

Use [Cursor

L] to select “DTV CC”, then press

[ENTER].

Closed Caption

Off

Conventional CC

DTV CC

CC Style

Use [Cursor

L] to select the desired DTV closed

caption, then press [ENTER].

Closed Caption

Off

Conventional CC

Service1

Service2

Service3

Service4

Service5

Service6

DTV CC

CC Style

DTV CC

Off

Select if you do not want DTV CC. This is the default.

Service1~6

Select one of these before changing any other item in “Closed Caption” menu. Choose “Service1” under normal circumstances.

Press [SETUP] to exit.

Note:

• “DTV CC” that you can switch differs depending on the broadcast description.

A71F4UH__EN.indd 25A71F4UH__EN.indd 25 2007/05/24 14:12:382007/05/24 14:12:38

Page 26

PTIONAL SETTING

CC Style

You can change the style of CC such as font, color or size, etc.

Press [SETUP] to display the main menu.

Use [Cursor

L] to select “DETAIL”, then press

[ENTER].

Use [Cursor

L] to select “Closed Caption”, then

press [ENTER].

Detail

Closed Caption

Auto

V–chip

HDMI Audio

Use [Cursor

L] to select “CC Style”, then press

[ENTER].

Closed Caption

Off

Conventional CC

DTV CC

CC Style

Use [Cursor

L] to select “User Setting”, then press

[ENTER].

CC Style

Off

Font0

Middle

White

Solid

Black

None

Solid

User Setting

Font Style

Font Size

Font Color

Font Opacity

Back Color

Back Opacity

Edge Color

Edge Type

Use [Cursor

L] to select “On”, then press [ENTER].

CC Style

Off

Font Style

Font Size

Font Color

Font Opacity

Back Color

Back Opacity

Edge Color

Edge Type

User Setting

Closed Caption

Use [Cursor

L] to select an item, then press

[ENTER]. Then use [Cursor

L] to select the desired

setting and press [ENTER].

ABCDEFGHIJKL

The setting description for each item is shown below.

[Font Style]

Closed Captioning font style can be changed as below.

CC Style

User Setting

Font Size

Font Color

Font Opacity

Back Color

Back Opacity

Edge Color

Edge Type

Font Style

Closed Caption

[Font Size]

Font size of the displayed caption can be switched as below.

CC Style

Small

Large

Middle

Closed Caption

User Setting

Font Style

Font Color

Font Opacity

Back Color

Back Opacity

Edge Color

Edge Type

Font Size

•

Back (Back Color and Back Opacity)

Picture display

Edge (Edge Color and Edge Type)

Font (Font Style, Font Size, Font Color and Font Opacity)

A71F4UH__EN.indd 26A71F4UH__EN.indd 26 2007/05/24 14:12:392007/05/24 14:12:39

Page 27

WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

[Font Color]

Font color of the displayed caption can be switched as below.

CC Style

White

Black

Red

Green

Blue

Yellow

Magenta

Cyan

Closed Caption

User Setting

Font Style

Font Size

Font Opacity

Back Color

Back Opacity

Edge Color

Edge Type

Font Color

[Font Opacity]

Font opacity of the displayed caption can be switched as below.

CC Style

Flash

Translucent

Transparent

Solid

Closed Caption

User Setting

Font Style

Font Size

Font Color

Back Color

Back Opacity

Edge Color

Edge Type

Font Opacity

[Back Color]

Background color of the displayed caption can be switched as below.

CC Style

White

Black

Red

Green

Blue

Yellow

Magenta

Cyan

Closed Caption

User Setting

Font Style

Font Size

Font Color

Font Opacity

Back Opacity

Edge Color

Edge Type

Back Color

[Back Opacity]

Background opacity of the displayed caption can be switched as below.

CC Style

Flash

Translucent

Transparent

Solid

Closed Caption

User Setting

Font Style

Font Color

Font Opacity

Back Color

Edge Color

Edge Type

Font Size

Back Opacity

[Edge Color]

Edge color of the displayed caption can be switched as below.

CC Style

White

Black

Red

Green

Blue

Yellow

Magenta

Cyan

Closed Caption

User Setting

Font Style

Font Size

Font Opacity

Back Color

Back Opacity

Edge Type

Font Color

Edge Color

[Edge Type]

Edge type of the displayed caption can be switched as below.

CC Style

Raised

Depressed

Uniform

L.Shadow

R.Shadow

None

Closed Caption

User Setting

Font Style

Font Color

Font Opacity

Back Color

Edge Color

Font Size

Back Opacity

Edge Type

Press [SETUP] to exit.

A71F4UH__EN.indd 27A71F4UH__EN.indd 27 2007/05/24 14:12:412007/05/24 14:12:41

Page 28

PTIONAL SETTING

V-chip

V-chip reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children.

Press [SETUP] to display the main menu.

Use [Cursor

L] to select “DETAIL”, then press

[ENTER].

Use [Cursor K / L] to select “V-chip”, then press [ENTER].

Closed Caption

Detail

Auto

V–chip

HDMI Audio

Use [the Number buttons] to enter the 4-digit numbers for your password.

PIN Code

Back

BACK

Enter password.

V-chip

When you have not set up your password, enter

0000. When the password is correct, the “V-chip” menu is displayed.

•

See the following description for setting each item.

MPAA Rating

TV Rating

Downloadable Rating

Clear Downloadable Rating

New Password

V-chip

...

“A. MPAA Rating”D page 29

...

“B. TV Rating”D page 29.

...

“C. New Password” D page 30

Note:

• When you select a rating and set it to “Block”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

• When you set the highest rating to “View”, all ratings turn to “View” automatically.

• To block any inappropriate programming, set your limits in “MPAA Rating”, “TV Rating” and “Downloadable Rating”.

• The V-chip setting will be retained after a power failure (except the access code reverts to 0000).

• If the rating is blocked, will appear.

• “Downloadable Rating” will be available when the unit receives a digital broadcast using the new rating system.

• If the broadcasting signal does not have the downloadable rating information, “Downloadable Rating is currently not available.” will appear. This message will also appear when you try to access “Downloadable Rating” after you have cleared the downloadable rating information, and the new information has not been downloaded since.

• To clear the downloadable rating information and its setting, select “Clear Downloadable Rating”.

A71F4UH__EN.indd 28A71F4UH__EN.indd 28 2007/05/24 14:12:422007/05/24 14:12:42

Page 29

WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

A. MPAA Rating

MPAA Rating is the rating system created by MPAA (Motion Picture Association of America).

Use [Cursor K / L] to select “MPAA Rating”, then press [ENTER].

MPAA Rating

TV Rating

Downloadable Rating

Clear Downloadable Rating

New Password

V-chip

Use [Cursor K / L] to select the desired rating, then press [ENTER] repeatedly to switch between “View” and “Block”.

Select View/Block Back

BACK

ENTER

X NC-17 R PG-13 PG G NR

V-chip

Rating Category

X Mature audience only NC-17 No one under 17 admitted

Restricted; under 17 requires accompanying parent or adult guardian

PG-13 Unsuitable for children under 13 PG Parental guidance suggested

G General audience

NR No rating

Press [SETUP] to exit.

Note:

• Changing the category to “Block” or “View” automatically changes all its sub ratings to the same (“Block” or “View”).

B. TV Rating

Use [Cursor K / L] to select “TV Rating”, then press [ENTER].

MPAA Rating

TV Rating

Downloadable Rating

Clear Downloadable Rating

New Password

V-ch ip

Use [Cursor K / L / s

] to select the desired rating, then press [ENTER] repeatedly to switch between “View” and “Block”.

Select View/Block Back

BACK

ENTER

TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y

V S L D

V-ch ip

Press [SETUP] to exit.

[To Set the Sub Ratings]

As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the sub ratings to block specific elements of programming. To set the sub ratings, follow the step below.

Use [Cursor K / L /

] to select the desired rating, then press [ENTER] repeatedly to switch between “View” and “Block”.

Select View/Block Back

BACK

ENTER

TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y

V S L D

V-ch ip

A71F4UH__EN.indd 29A71F4UH__EN.indd 29 2007/05/24 14:12:442007/05/24 14:12:44

Page 30

PTIONAL SETTING

Rating Category

TV-MA Mature audience only higher

TV-14 Unsuitable for children under 14

TV-PG Parental guidance suggested TV-G General audience

TV-Y7

Appropriate for all children 7 and older

TV-Y Appropriate for all children lower

Sub Rating Category Rating

FV Fantasy Violence TV-Y7 V Violence

TV-PG TV-14 TV-MA

S Sexual Situation L Coarse Language D Suggestive Dialogue TV-PG, TV-14

Note:

• Blocked sub rating will appear beside the main rating category in “TV Rating” menu.

• You cannot block a sub rating (D, L, S or V ) if the main rating is set to “View”.

• Changing the category to “Block” or “View” automatically changes all its sub ratings to the same (“Block” or “View”).

C. New Password

Although the default code “0000” is supplied with the unit, you can set your own password.

Use [Cursor K / L] to select “New Password”, then press [ENTER].

MPAA Rating

TV Rating

Downloadable Rating

Clear Downloadable Rating

New Password

V-ch ip

Press [the Number buttons] to enter the new 4-digit password.

Enter password again in “Confirm password.” entry field.

V-ch ip

PIN Code

Back

BACK

Confirm password.

Enter password.

----

Press [SETUP] to exit.

Note:

• Make sure new password and confirm password must be exactly the same. If they are different, the space is cleared for reentering.

• Your password will be erased and return to the default (0000) when a power failure occurs. If you forget the password, unplug the power cord for 10 seconds to restore the password to 0000.

•

A71F4UH__EN.indd 30A71F4UH__EN.indd 30 2007/05/24 14:12:462007/05/24 14:12:46

Page 31

WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

HDMI Audio

You can set the method of sound input for the HDMI - IN jack.

Press [SETUP] to display the main menu.

Use [Cursor

L] to select “DETAIL”, then press

[ENTER].

Use [Cursor

L] to select “HDMI Audio”, then press

[ENTER].

Closed Caption

Detail

Auto

V–chip

HDMI Audio

Use [Cursor

L] to select the desired sound input,

then press [ENTER].

Detail

Closed Caption

Auto

Digital

Analog

V–chip

HDMI Audio

Auto

Select if you have connected both digital device to the HDMI - IN jack and analog device to the audio sources. Digital audio input signal will have priority.

Digital

Select if you have connected digital device to the HDMI - IN jack for digital audio input signal.

Analog

Select if you have connected analog device to the analog audio jacks for analog audio input signal.

Press [SETUP] to exit.

A71F4UH__EN.indd 31A71F4UH__EN.indd 31 2007/05/24 14:12:472007/05/24 14:12:47

Page 32

ROUBLESHOOTING

Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this owner’s manual, check the following chart once before calling for service.

Symptom Remedy

No power • Be sure the power cord is plugged in.

• If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to reset itself.

No picture or sound • Check if the power is on.

• Check the outlet connection.

• Check the antenna or cable connection to the main unit.

• When the outside antenna is used, check the wire condition and connection.