gfm ULQ-902 User Manual

1

Please read and follow this instruction manual carefully before using the unit and retain it for future
reference.

Introduction

Thank you for choosing our new generation Web Digital Camera!
It is a high performance web digital product guaranteed by our technology and quality.
It is a PNP (Plug and Play) product for real-time data transmission to PC via USB port.
It has a high resolution and fast transmission rate, and it is also nice-looking and easy to
carry with you. Please take a few minutes to read the following instructions.

Parameters and Features

* High resolution CMOS color sensors
* Large window capture size: 640 x 480
* Video mode: 24 bit true color
* Interface: USB port
* Transmission rate: 320 x 240 30F/s
640 x 480 15F/s

* Noise-signal ratio: greater than 48dB (30F/s 220LUX)

* Dynamic range: greater than 72dB
* Image focus: 5cm to ∞
* Built-in image compression
* Automatic brightness adjustment
* Automatic color compensation
* Manual focus
* Microphone

System Requirements

* IBM PC or compatible PC or laptop with USB port
* Pentium 200 or higher CPU
* Windows 98 / ME / 2000 / XP / Vista operation system
* Over 200MB free hard disk space
* CD-Rom Drive
* 32MB or higher memory
* Support DirectX VGA card

Driver Installation

1. Insert Driver/Application laser disc into CD-Rom Driver ,

The driver will be automatically run and will

display the window below.

2

Click “Driver” icon

Click “Next”

3

Click “Finish”

2. Connect web camera to USB port in PC, the system will find it and automatically complete the

installation.

4

3. Run Amcap.exe and you will see your pictures. You may change picture effect settings or

take snaps.

Microphone Installation

When you use the microphone, please put the microphone plug to connect the computer.

Warning:

* Do not touch the lens by using hand, sharp or coarse stuff; clean the lens regularly by using
soft cloth.
* Do not use it in hot, cold, dusty or humid circumstances.
* Be careful not to drop PC camera. It may cause damage such as a malfunction or scratch the lens.

* Changes or modifications to this unit not expressly approved by the party responsible for compliance
Could void the user’s authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.

5

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio TV technician for help.

This form describes the protection You will have under this Limited Warranty.

If you are not totally satisfied with this GFM product, you may return it to any Meijer store for a
full refund within 6 months (180 days) of purchase when accompanied by a receipt.

For customer support please call [phone] or go to www.gfmproducts.com

Dist. by Wholesale Merchandisers, Inc.,
2929 Walker, NW
Grand Rapids, MI 49544
Made in China

GFM Guarantee