2
Introduction
Thank you for purchasing this Keychain Digital Photo Frame.
Please read this manual carefully FIRST in order to get the most
out of your device.
What your Digital Photo Frame includes:
• Photo Frame
• USB cable
• User’s Manual
Computer System Requirements for Windows
To be able to download photos to your PC you will need the
following minimum configuration:
• Windows XP/Vista (NOT Compatible with Mac)
• Pentium-based PC (or equivalent)
• 150 MB hard disk free space and 128 MB or more
RAM
• Available USB Interface
• Color display (16 bit or higher recommended)
• Screen resolution 1024 X 768
A Quick Look at Your Device
1. LCD screen
2. Power/Menu button
3. Page Up button
4. Page Down button
5. USB port
3
Preparing Your Device for Use
To charge battery for your photo frame
Your device has a built-in lithium battery. A red battery icon
will flicker on the LCD screen when your Photo Frame
battery is running low. After 10 seconds, your Photo Frame will
automatically turn off. You can recharge your lithium battery by
connecting your photo frame to the computer with the USB
cable.
Starting Your Digital Photo Frame
Power on Your Photo Frame:
Press and hold the Power/Menu button for about 3 seconds to
power on your Digital Photo Frame.
Note:
Please make sure that your Photo Frame has sufficient battery
power in order to operate properly.
Power Off Your Photo Frame
When your Photo Frame is turned on, press and hold the
Power/Menu button for about 3 seconds. On your LCD screen,
4
5
the message “Power Off” will appear, and your Photo Frame will
power off.
Viewing Different Photos On Your Photo Frame
If multiple photos are loaded on your Photo Frame, you can
press the Page Up or Page Down buttons to view different
photos on your LCD screen.
Exploring the Settings Options
To change or adjust any of the settings options for your Photo
Frame, first power on your Photo Frame, and then press the
Power/Menu button. On your LCD screen, you will see the
heading “Main Menu”, followed by a list of settings that can be
adjusted on your Photo Frame. Use the Page Up button or
Page Down button to scroll through the list of settings options.
When the setting you wish to adjust is highlighted, press the
Power/Menu button to make adjustments. Your Photo Frame
features the following settings which can be adjusted:
Main Menu
USB Connect
Slide Show
AUTO Off
LCD Contrast
Backlight
Display Clock
Set Clock
Delete One
Delete All
Exit
6
7
1. USB CONNECT
A. Press the Power/Menu button once.
B. Press the Page Up or Page Down button repeatedly until
USB CONNECT is highlighted.
C. Press the Power/Menu button to make adjustments to th e
USB CONNECT setting.
USB CONNECT SETTINGS
YES:
When YES is selected, you can connect your Photo Frame
to your computer in order to load photos on to your Photo
Frame.
NO:
When NO is selected, your computer will not recognize
your Photo Frame and you will not be able to load photos from
your computer.
You can use the Page Up or Page Down buttons to highlight
YES or NO. You can press the Power/Menu to enter this
setting.
NOTE: The USB CONNECT option must be set to YES in order
to load photos from your computer onto your photo frame.
Loading...