Page 1
1
User Manual
Thank you for your purchase of Interwire. Interwire provides robust, efficient, and convenient interfaces between your guitar, effect stompboxes, and your amps. No matter how
complex your effect chain is and however you wish to position the pedals in the pedalboard, Interwire keeps the interconnects simple and straightforward by organizing all input/
output and send/return cables to terminate at only a single interconnection point. This enables you to maintain a well-organized and easy to setup pedalboard environment; saving
your time, energy, and focus, to what really matters : your music.
INTERWIRE
FXL side
FX chain 1
FX chain 2
AMP side
DUAL CONFIGURATION
Interwire has 2 switchable internal wiring configuration, one is intended for setup that places
all effects before the amp’s input (see illustration on page 3), and the other one is intended
for setup that places effects before the amp’s input and inside the amp’s FX-loop (see illustration on page 4).
Page 2
2
User Manual
INTERWIRE
FXL side
FXL side
AMP side
Cable plugged in
No connection
AMP side
Switching between the two configurations is automatic, Interwire senses whether a cable is
present or not at the connector labeled ‘RETURN’ on the AMP side, and configures the internal wiring accordingly. These two configurations allow you to achieve various setup
schemes easily, without having to alter your pedalboard wiring.
Built-in high quality buffer
Guitar In
To amp’s input
Guitar In
To amp’s input
Page 3
3
User Manual
INTERWIRE
Place all the pedals that you want to put before the amp’s input in FXL I, and place all the pedals (usually delay, re-
verb, and modulation) that you want to put inside the amps FX-loop in FXL II.
Guitar FXL I Preamp FXL II Power Amp
Page 4
4
User Manual
INTERWIRE
This is the setup to use if you wish to place all your pedals before the amp’s input (not using the amps’ FX-loop) -
simply disconnect the cables from the amp’s send / return path and Interwire will automatically reconfigure its inter-
nal wiring - there’s no need to alter your pedalboard wiring!
Guitar FXL I FXL II Amp’s Input
Page 5
5
User Manual
2 Outputs Possible?
There’s another setup variation that you can use to obtain two outputs from Interwire, but
this variation can only be used if you do not use the amp’s FX-loop. This two-outputs
setup allows a myriad of setup possibilities, such as :
• Stereo Output (see page 6).
• Dry / Wet Outputs (see page 6).
• Electric / Simulated Acoustic Outputs (see page 7).
INTERWIRE
What About 3 Outputs?
Yes, It’s in fact possible to get 3 outputs from Interwire! The internal connection between
SEND (FXL II side) and SEND (AMP side) is bi-directional, i.e. signals can pass in either
direction.
One possible scenario where you would need 3 output channels is when implementing
the Wet / Dry / Wet setup. The ‘wet’ signals are output signals of some effect processors,
while the ‘dry’ signal is the unprocessed signal. You can use a scheme similar to the one
shown on page 6 to implement this setup (see page 8).
Page 6
6
User Manual
INTERWIRE
Stereo Outputs or Dry / Wet Outputs
Page 7
7
User Manual
INTERWIRE
Electric / Simulated Acoustic Outputs
Page 8
8
User Manual
INTERWIRE
Wet / Dry / Wet Setup (3 outputs)
Page 9
9
User Manual
INTERWIRE
This product is designed and manufactured by :
Specifications
:
• Input impedance : 1 MOhm.
• Output impedance : 1 KOhm.
• Dimension : 12 cm x 6.5 cm x 3.6 cm.
• Current draw : 60 mA (max).
• Powered by 9V DC Adaptor (sold separately).
Email : gfisys@gmail.com
Website: www.gfisystem.com
GFI System
Jakarta, Indonesia.
Key Features:
• Robust and versatile pedalboard interface unit (a.k.a Junction Box / Patch Bay).
• Premium quality input signal buffer.
• Two independent FX Loops with auto-sense configuration switching.
• 9VDC operation (internal voltage multiplier circuitry boosts the supply voltage to 18V, pro-
viding immense headroom).
Loading...