GEZE SecuLogic RWS TZ 300, SecuLogic RWS TZ 320 Komfort, SecuLogic RWS TZ 320 Standard System Documentation

Download

BEWEGUNG MIT SYSTEM

GEZE SAFETY TECHNOLOGY

System documentation

GEZE SecuLogic RWS

Escape route system

GEZE System Documentation RWS Table of contents

Contents

DOOR TECHNOLOGY

AUTOMATIC DOOR SYSTE MS

RWA AND WINDOW TECHNOLOGY

SAFET Y TECHNOLOGY

GLASS SYST EMS

Foreword

Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Terms and de nitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Cable speci cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety and responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Systems

System overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

GEZE SecuLogic System TZ 300 SN . . . . . . . . . . . . . . . . . . . . 8

GEZE SecuLogic System TZ 320 Standard . . . . . . . . . . . . . . . . 9

GEZE SecuLogic System TZ 320 Komfort . . . . . . . . . . . . . . . 10

GEZE SecuLogic System TZ 320, 1-box solution . . . . . . . . . . . 11

GEZE SecuLogic Vernetzt . . . . . . . . . . . . . . . . . . . . . . . . . 12

GEZE special system for children’s nurseries . . . . . . . . . . . . . 14

GEZE special system for bi-directional emergency exit route . . 15

GEZE special system for areas without local emergency

push button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

GEZE special system for

air locks on emergency exit routes . . . . . . . . . . . . . . . . . . . 17

System components

GEZE Door Control Unit TZ 300 SN . . . . . . . . . . . . . . . . . . . 18

GEZE Door Control Unit TZ 320 . . . . . . . . . . . . . . . . . . . . . 19

GEZE Terminal Box KL 220 . . . . . . . . . . . . . . . . . . . . . . . . 20

GEZE Control Panel TE 220/TTE 220 . . . . . . . . . . . . . . . . . . 21

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Annex

Dimensional drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Cable diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Certi cates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

EltVTR directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

GEZE System Documentation RWS Foreword

Foreword

Safety comes  rst

In public buildings, escape routes and respective control systems are a must. They are an inherent part of building planning and pertain to  re and personal protection.

What must a high-quality escape route system do to save lives? It must be absolutely reliable. But beyond this functionality, which is regulated by stringent legal restraints, the quality of an escape route system is also demonstrated in many further aspects.

With the GEZE SecuLogic escape route system we provide answers to the most important requirements a modern system solution has to ful ll.

Reliable, certi ed safety

GEZE SecuLogic escape route systems meet the requirements of the EltVTR guideline, the “Guideline governing electrical locking systems on doors in escape routes” issued by the Deutsche Institut für Bautechnik (German Institute for Building Technology).

Cutting-edge technology for more functions

Modular bus technology, wireless parameter setting using infrared technology, simple and fast installation and a comprehensive range of services account for the quality and safety of the GEZE SecuLogic escape route system.

Systems grow – and the GEZE SecuLogic escape route system does too

Components such as  re or hazard alarm systems, access control, emergency exit openers or motor locks can be integrated in the GEZE SecuLogic escape route system at any time. This is guaranteed by the terminal box KL 220, the control panel TE 220/ TTE 220 and the control software VAT 220 SN (virtual display and operating panel).

A question of design too

The  ush-mounted version of the door control unit TZ 320 can be integrated in the 55-size switch ranges of brand manufacturers such as Berker, Feller, Gira, Jung and Merten.

If things really do get serious

All elements must be easily recognisable and operable with a single movement. GEZE SecuLogic escape route system has put this into practice: A large-surface emergency push button, illuminated emergency sign and clear acoustic and optical signals are always reliable helpers in an emergency. The size of the emergency push button makes its operation “barrier-free”, i.e. it is also easy for people with restricted mobility, children and older people to use in an emergency.

Because as we already mentioned: Safety comes  rst – and goes hand in hand with design and convenience at GEZE.

ZuKo

BMA

GEZE MLS

FTÖ

GEZE System Documentation RWS Foreword

Aborting the short-term release:

When this is aborted, the door is locked prematurely when it is closed and the short-term release has not expired. This prevents the door being accessible for unauthorised people after someone has passed through it. The abortion setting can be deactivated via the service menu. In this case, the door remains unlocked for the duration of the time set. The release time can be ended prematurely by actuating the key switch again.

Direct release (in accordance with EltVTR)

Safety-related interruption of power supply to the electrical locking system by means of an opener contact when the emergency push button is actuated.

Unlocking (in accordance with EltVTR):

Non-safety-related interruption of the power supply to the electrical locking system e.g. through a key switch.

Indirect release (in accordance with EltVTR):

Safety-related interruption of the power supply to the electrical locking system if a further switching process is triggered by the opener contact of the emergency push button, with this new process interrupting the power supply to the electrical locking system.

After-triggering the short-term release:

If a new short-term release is triggered during the release time, the release time begins again. The after-triggering setting can be deactivated via the service menu. If a new short-term release is triggered during the release time by means of the internal key switch or a programmable input, the system locks again.

Emergency unlocking (in accordance with EltVTR):

Non safety-related interruption of the power supply to the electrical locking system e.g. through a hazard alarm system (GMA) or similar automatic triggering device.

Pre-alarm:

If the release time is exceeded during passage, an acoustic signal is sounded which informs the user that the time has been exceeded. If the door is closed during a pre-alarm, it is automatically locked and the pre-alarm is reset.

Door alarm:

If the pre-alarm time is also exceeded, the so-called door alarm is triggered. This can be reset via the integrated key switch or all inputs “short-term release” as well as via the control panel TE220 or the visualisation VAT 220 SN. If the door is closed during a door alarm, the door will be locked and can only be unlocked again once the alarm has been reset (except if the emergency push button is pressed). A door alarm will also be given if the door is “broken open”, in other words when the door is opened by force or without prior release.

Terms and de nitions

GEZE System Documentation RWS Foreword

AP Surface-mounted version

BLE 220 Flashlight

BMA Fire alarm system

EMA Burglar alarm system

FS Latch lock

FTÖ Emergency exit opener

FWS Emergency exit route sign

GLT Building management system

GMA Hazard alarm system

IQ Lock C Contact lock

IQ Lock EL Motor lock

IQ Lock EM Lever lock

IQ Lock M Motor lock

KL 220 Terminal box

KZF Short-term release

MA 500 Holding magnet

NC Potential-free opener contact (normal closed)

NO Potential-free closer contact (normal open)

NOT 320 Emergency push button

NT Power supply

OK Upper edge

RWA Smoke and heat extraction system

SCT 221 Key switch, one-pole switch (closer)

SCT 222 Key switch with LED display, one-pole reversible switch (two closers)

SCT 320 Key switch, one-pole reversible switch (two closers)

SHB 220 Signal horn with  ashlight

SLE 220 Signal light

SLH 220 Signal horn

TE 220 Control panel

TZ 320 Door control unit using bus technology

TZ 322 Door control unit using bus technology without emergency push button

TZ 323 Door control unit using bus technology, turned through 180°

... B Door control unit with illuminated emergency exit route sign

... S Door control unit with key switch (connection via ribbon cable)

... N Door control unit with integrated power supply

... BSN Door control unit with illuminated emergency exit route sign, key switch and integrated power supply

... BS Door control unit with illuminated emergency exit route sign and key switch

... SN Door control unit with key switch and integrated power supply

UK Lower edge

UP Flush-mounted version

USV Uninterruptible power supply

VAT 220 SN Visualisation software

ZSU Timer

ZuKo Access control

Abbreviations

Example for the name of the door control unit:

Door control unit with illuminated emergency exit route sign with key switch Description TZ 320 B S = TZ 320 BS

GEZE System Documentation RWS Foreword

The GEZE SecuLogic RWS was designed according to the latest technical standards and recognised safety-related regulations. Nevertheless, hazards can still occur during installation and application. For this reason, please note the following instructions:

Basic safety instructions

– Start-up and maintenance may only be carried out by a quali ed electrician or an expert trained by GEZE. – Only genuine GEZE spare parts or accessories approved by GEZE may be used. – Unauthorised modi cations to the system exclude GEZE’s liability for any resulting damage. – Primary protective measures are to be carried out on side. – Respective national standards must be heeded when laying cables.

Proper use

The GEZE SecuLogic RWS system has been designed for the control and monitoring of electrically locked emergency exit routes. External products may only be used after consultation with GEZE.

Improper use

The connection of products which have not been expressly approved for use by GEZE constitutes improper use.

Safety and responsibility

How to lay cables safely

Here are a few tips to help you lay the required cables safely and precisely:

Interference-free

Do not lay the data cable parallel to high-voltage cables (electromagnetic interference)!

The right cable

Shielded cable with twisted pairs of conductors.

Peripherals

• J-Y(ST)Y 2x2x0.6

• J-Y(ST)Y 4x2x0.6

Mains cable

• NYM-J 3x1.5

Bus cabling

• J-Y(ST)Y 2x2x0.8

• J-Y(ST)Y 4x2x0.8

Structure or networking

Do not route the bus line in a star shape, but rather in series.

Cable speci cation

GEZE System Documentation RWS System overview

System overview

Application

TZ 300 TZ 320 Standard TZ 320 Komfort

Local operation

Short-term release (KZF) (20 sec)

•

Short-term release (KZF) (1 sec - in nity)

• •

Abortion of KZF with door closed

• • •

After-triggering of KZF

• • •

Pre-alarm (60 sec)

•

Pre-alarm (1 sec - 10 min)

• •

Alarm 10 sec - 2 min / permanent alarm

- / • • / • • / •

Permanent unlocking

• • •

Release via emergency push button

• • •

Connection possibilities

Emergency exit opener type 331

UP 2x AP 3x

UP 3x AP 3x

Holding magnet MA 500

UP 1x AP 2x

UP 2x AP 2x

Emergency unlocking for hazard alarm system

• • •

Indirect release

• •

Central emergency push button via safety circuit

• •

External key switch

• • •

External emergency push button

• •

Terminal T 320 (bi-directional emergency exit route)

• •

Access control (short-term release)

• • •

Latch (short-term release)

• • •

Timer (unlocking) external

• • •

Timer (unlocking) internal

• •

Burglar alarm system (locking has priority)

•

Programmable inputs

0 3 7

Programmable outputs

0 2 8

Flashlight/siren/alarm message

• •* •

Motor lock

•* •

Lever lock

•* •

Swing door drive

•** •

Signal light control

•** •

Additional door opener access control

•* •

Output of di erent system states

•* •

Control panel TE 220/TTE 220

• •

Visualisation software VAT 220 SN

• •

Other

Setting times / parameters using the key switch

• / – • / –

Infrared interface for diagnosis, readout of the alarm memory, setting parameters via Service terminal ST 220

• •

Alarm memory

• •

Integrated air lock control

• •

Network function for BMA, ZSU, EMA

• •

* Function can be realised via 2 outputs for which parameters can be freely set. There are 2 outputs available on the TZ 320. If more outputs are required, the TZ 320 Komfort with terminal box must be used. ** 2 outputs are required for this function.

GEZE System Documentation RWS GEZE SecuLogic System TZ 300 SN

TZ 300 SN UP

TS 5000

FTÖ

TZ 300 SN AP

TS 5000TS 5000

MA 500 MA 500

GEZE SecuLogic System TZ 300 SN

System structure SecuLogic System TZ 300 SN

Functional description

The standard functions for securing a single emergency exit door are covered by the possibility of short-term release and permanent unlocking via the local operating elements as well as release via the emergency push button. In addition, there are inputs available for a hazard alarm system (e.g. BMA), access control (ZuKo) and a timer (ZSU). External alarm indicators such as  ashlights or sirens can be connected via a potential-free contact.

System components

– TZ 300 SN, AP/UP – Emergency exit opener with latch lock or holding magnet with installation set and door contact

Options

• Flashlight BLE 220, signal horn SLH 220

• External key switches SCT 220, SCT 221, SCT 222, SCT 320

• Uninterruptible power supply (USV)

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

System structure

ZuKo

BMA

ZSU

Mains

Panic lock Panic lock

Signal horn

Flashlight

Fixed leaf Active leaf

Alarm message

GEZE System Documentation RWS GEZE SecuLogic System TZ 320

TS 5000

TZ 320 SN UP

TSA 160 NT Slimdrive EMD

MST 210

TZ 320 SN

+ FS

GEZE SecuLogic System TZ 320 Standard

System structure SecuLogic System TZ 320

Functional description

The GEZE door control unit TZ 320 secures and monitors the opening and closing processes of emergency exit doors on escape routes. The modes “permanent unlocking”, “short-term release” and “locking for alarm reset” are available. An integrated LED indicates the door modes “locked/unlocked”, “open/closed” and alarms. A large number of additional functions can be implemented using 3 programmable inputs (for the connection of e.g. access control systems, timer,  re and burglar alarm system) and 2 programmable outputs (for the connection of e.g. swing door drive, motor lock, additional door openers, optical/

acoustic alarm messages or relaying of system states). The integrated weekly timer and the air lock function allow  exible use in the system. The GEZE door control unit TZ 320 using bus technology has been tested in accordance with the EltVTR guideline (see p. 62  ).

System components

– Door control unit TZ 320 SN AP/UP – Emergency exit opener with latch lock or holding magnet with installation set and door contact

Options

• Flashlight BLE 220, signal horn SLH 220

• External key switches SCT 220, SCT 221, SCT 222, SCT 320

• External emergency push button NOT 320

• Uninterruptible power supply (USV)

• Terminal T 320

• Service terminal ST 220

• GEZE IQ Lock EM, EL, M and C

• Control panel TE 220/TTE 220

• Visualisation software VAT 220 SN

• OPC interface OPC 220

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

System structure

ZuKo

BMA

Mains 230 V AC 50 Hz

GEZE IQ Lock EL Motor lock

EMA

Signal horn

Flashlight

GEZE BUS

Alarm message

GEZE IQ Lock C Contact lock

GEZE BUS

BMA EMA

ZuKo

Key switch

Sensor strips

Contact sensor

Movement detector

Main switch

GEZE System Documentation RWS GEZE SecuLogic System TZ 320

KL 220

TSA 160 NT Slimdrive EMD

MST 210

TZ 320 SN

+ FS

KL 220

TZ 320 S

MST 210

TS 5000

+ FS

GEZE SecuLogic System TZ 320 Komfort

System structure SecuLogic System TZ 320 + KL 220

Functional description

The door control unit TZ 320 can be used even more intensively in connection with the terminal box KL 220. The terminal box provides further inputs and outputs, so that even more devices can be connected to extend the area of application, e.g. by a combination of swing door drive with BMA, EMA and relaying messages. The respective terminal box is connected to a system-internal bus. This means a separate, higher-capacity power supply is available, as well as additional inputs and outputs for which parameters can be set, resulting in even more application possibilities.

System components

– Door control unit TZ 320 S AP/UP – Terminal box KL 220 AP/UP – Emergency exit opener with latch lock or holding magnet with installation set and door contact

Options

• Flashlight BLE 220, signal horn SLH 220

• External key switches SCT 220, SCT 221, SCT 222, SCT 320

• External emergency push button NOT 320

• Uninterruptible power supply (USV)

• Terminal T 320

• Service terminal ST 220

• GEZE IQ Lock EM, EL, M and C

• Swing door drive TSA 160, Slimdrive EMD

• Control panel TE 220/TTE 220

• Visualisation software VAT 220 SN

• OPC interface OPC 220

• GEZE SecuLogic access control system

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

System structure

ZuKo ZuKo

BMA

GEZE IQ Lock EL Motor lock

EMA

Signal horn Signal horn

Flashlight Flashlight

GEZE BUS GEZE BUS

Alarm message Alarm message

Key switch Key switch

Mains 230 V AC 50 Hz

Movement detector

Contact sensor

Main switch

Sensor strips

GEZE System Documentation RWS GEZE SecuLogic System TZ 320

TZ 320 UP

TS 5000

FTÖ+ FS

GEZE SecuLogic System TZ 320, 1-box solution

System structure SecuLogic System TZ 320

System structure

GEZE IQ Lock C Contact lock

ZuKo

BMA EMA

Signal horn

Flashlight

GEZE BUS

Alarm message

Mains 230 V AC 50 Hz

Key switch

Functional description

The full functionality of the emergency exit back-up can only be realised using a  ush-mounted box. Control of the operating modes and acknowledgement of alarms is taken over by the key of the GEZE IQ Lock. This variant is possible as standard with the door control unit TZ 320 or as “Komfort” with an additional terminal box KL 220.

System components

– Door control unit TZ 320, UP – GEZE IQ Lock EM, EL, C – Emergency exit opener 331 with latch lock

Options

• Holding magnet MA 500

• Signal horn SLH 220

• GEZE SecuLogic access control system

• Terminal 320

• External emergency push button NOT 320

• Flashlight BLE 220

• Terminal T 320

• Visualisation software VAT 220 SN

• OPC interface OPC 220

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

GEZE System Documentation RWS GEZE SecuLogic System TZ 320

TZ 320 TZ 320 TZ 320 TZ 320 TZ 320 TZ 320

VAT 220 SN

TE 220/TTE 220

GEZE SecuLogic Vernetzt

System structure SecuLogic Vernetzt

Functional description

The system SecuLogic Vernetzt is used to secure emergency exit doors subject to central control and monitoring in large buildings, e.g. shopping centres, malls, public institutions. The individual control components (visualisation software, control panels and door control units) can be assigned anywhere in the individual bus systems. The maximum cable length for each bus system is 1000 m.

VAT 220

8 bus systems with a maximum of 63 door control units each can be displayed and operated using the visualisation software VAT 220 SN. The VAT 220 SN can work both as a central and as a parallel operating spot. There is no classic server-client relationship, because with VAT 220 SN all the doors in the system can be controlled centrally and without a loop via a server. It is possible to set up further lower-order operating spots with the aid of control panels TE 220/TTE 220.

TE 220/TTE 220

The control panel TE 220 wall panel and the control panel TTE 220 desk panel are used as control and display units for up to 20 individual door control units via a bus system (max. 5 TE 220 per bus system).

OPC

The software interface OPC is used in the escape route system so that data can be transmitted to higher-level building management systems. The OPC interface guarantees simple communication between devices from di erent manufacturers.

System structure

Bus system 1

... up to 63

Bus system 2

Bus system 3

Bus multiplexer

Bus system 4

BMA

EMA

ZSU

GEZE System Documentation RWS GEZE SecuLogic System TZ 320

System components

– Door control unit TZ 320 SN AP/UP – Door control unit TZ 320 S AP/UP + terminal box KL 220 AP/UP – Emergency exit opener with latch lock or holding magnet with installation set and door contact – Visualisation software VAT 220 SN

Options

• Flashlight BLE 220, signal horn SLH 220

• External key switches SCT 220, SCT 221, SCT 222, SCT 320

• External emergency push button NOT 320

• Uninterruptible power supply (USV)

• Control panel TE 220/TTE 220

• Terminal T 320

• Service terminal ST 220

• GEZE IQ Lock EM, EL, M

• Swing door drive TSA 160, Slimdrive EMD

• OPC interface OPC 220

• GEZE SecuLogic access control system

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

GEZE System Documentation RWS GEZE special systems

TZ 300 SN UP

TS 5000

FTÖ

SCT 221

GEZE special system for children’s nurseries

Special system for children’s nurseries

Functional description of the children’s nursery solution

The door is permanently locked and secured by the door control unit TZ 300 SN.

Passage by nursery sta

The sta trigger a short-term release at the TZ 300 SN via the outer key switch and so can pass through the door using the key on the panic lock. The outer door handle is coupled in during the day via the switchover function “B” of the panic lock.

Arrival and collection times

The external push button can be activated or deactivated via the switch in the “sta room”. This means that parents can trigger a short-term release when they are bringing or collecting their children, and open the door via the coupled-in door handle. Parents can leave the nursery again by opening the door using the push button mounted at a height of 1.80 m. This installation height of

1.80 m means that children cannot reach the button.

Emergencies

In an emergency, the door can always be passed through in the direction of emergency exit by pressing the emergency push button. Triggering of the emergency push button is indicated by both an optical and acoustic signal on the TZ 300. Optionally, the alarm can be relayed. This allows an external light or siren to be triggered.

Fire

A  re alarm system can be connected to the TZ 300 for immediate emergency unlocking in the event of a  re. This means the door control unit has already been unlocked when people escaping the  re arrive at the door.

System components

– Door control unit TZ 300 SN – Emergency exit opener with latch lock or holding magnet with installation set and door contact – Release push button inside at a height of 1.80 m – Release push button outside – Circuit breaker – External key switch SCT 221 – Panic lock, function “B” (on site)

Options

• Flashlight BLE 220, signal horn SLH 220

• Uninterruptible power supply (USV)

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

System structure children’s nursery solution

Push button

1.80 m

Key switch (sta room)

Alarm message

Push button outside

Mains

Panic lock Function “B” (handle/handle)

BMA

GEZE System Documentation RWS GEZE special systems

TZ 320 SN innen

T 320 außen

TS 5000

FTÖ

Special system for bi-directional emergency exit route

Functional description for bi-directional emergency exit route

To secure a door with two directions of escape, the terminal T 320 is connected to the door control unit TZ 320 via an internal bus. This allows the door to be released safely from both sides via an emergency push button in the event of a hazard. The door can be controlled via the terminal T 320 and via the door control unit TZ 320. This allows authorised passage to take place via the integrated key switch. In addition, external triggering elements such as access controls or key switches can be connected to the TZ 320. The integrated bus function of the TZ 320 allows networking and thus circuit-entering to central operating spots such as the control panel TE 220, visualisation software VAT 220 or a higher-level building management system.

System components

– Door control unit TZ 320 SN AP/UP – Terminal T 320 AP/UP – Emergency exit opener 331 with latch lock 807-10

Options

• Holding magnet MA 500

• Access control

• Signal horn SLH 220

• Flashlight BLE 220

• Signal light SLE 220

• Key switches SCT 221, SCT 220, SCT 320

• IQ Lock EL, EM, M, C

• Swing door drive Slimdrive MED, TSA 160 NT

• Control panel TE 220

• Visualisation software VAT 220 SN

• OPC interface OPC 220

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

System structure bi-directional emergency exit route

GEZE Bus

Mains

Signal horn

ZuKo

Key switch

TOP LOCK

Alarm message

BMA

Panic lock

GEZE special system for bi-directional emergency exit route

inside

outside

GEZE System Documentation RWS GEZE special systems

+ FS

TS 5000

+ FS

TS 5000

+ FS

TS 5000

GEZE special system for areas without local emergency push button

Special system for areas without local emergency push button

Functional description

Securing emergency exit doors in areas with a local emergency push button in accordance with EltVTR (DIBT 5/98) section 2.6, para. 3.1.3 and building regulation list A Part 1, e.g. psychiatric units, care areas for dementia patients, forensic areas. The safety circuit is a separate power circuit to realise a safety-related (indirect) release of several door control units in connection with central emergency push buttons, BMA or similar. The safety circuit is used in particular when there is no local emergency push button on the door control unit. This must be approved by national top-level building authorities in individual cases.

System components

– Door control unit TZ 322 SN AP/UP without emergency push button – Key switch SCT 222 with LEDs – Relay board RP 220 – Emergency push button NOT 320 – Emergency exit opener with latch lock or holding magnet with installation set and door contact

Options

• GEZE IQ Lock EL, EM, M and C

• Flashlight BLE 220/signal horn SLH 220

• Swing door drive TSA 160, Slimdrive EMD

• Control panel TE 220/TTE 220

• Terminal T 320

• Service terminal ST 220

• Visualisation software VAT 220 SN

• Uninterruptible power supply (USV)

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

System structure

Panic lock

Safety circuit

Mains

Central spotBMA

TZ 322

RP 220

TZ 322

RP 220

TZ 322

RP 220

USV

NOT 320

TE 220

Mains

SCT 222

inside

SCT 222

outside

SCT 222

outside

SCT 222 outside

SCT 222

inside

SCT 222

inside

ZuKo

Panic lock

GEZE System Documentation RWS GEZE special systems

+ FS+ FS

VBVB

+ FS+ FS

TS 5000TS 5000

TS 5000

TZ 320 SN TZ 320 SNTZ 320 SN TZ 320 SN

GEZE special system for air locks on emergency exit routes

Special system for air locks on emergency exit routes

Functional description

Realisation of air locks on emergency exit routes; e.g. operating theatre areas, laboratories and quarantine areas. A maximum of 10 air lock groups with up to 10 door control units each (total of max. 63 door control systems/bus system) can be realised per bus system. The door control units in one group lock mutually. A door can be assigned to several groups at the same time. This assignment can be changed at any time, thus forming new air lock relationships. Signal light displays can be triggered via two programmable outputs on the TZ 320.

Active air lock:

Basically, all the doors in one air lock group for which parameters are set as an active air lock are locked and thus also closed. If one of these doors is unlocked short-term via respective control elements, it transmits a signal to all the other doors in the group at the same time and blocks the control elements of the other (still locked) doors and vice versa.

Passive air lock:

In contrast to the active air lock, all the doors in one air lock for which parameters are set as a passive air lock are not generally locked, but are closed. If one of these doors is opened, i.e. the door leaf moves, this transmits a signal to all the other doors and locks them and vice versa. In the case of both air lock types, immediate passage is possible by actuating the emergency push button.

The air lock function can be switched on or o via the local key switch.

System components

– Door control unit TZ 320 SN AP/UP – Emergency exit opener with latch lock or holding magnet with installation set and door contact – Service terminal ST 220

Options

• Flashlight BLE 220, signal horn SLH 220

• GEZE IQ Lock EL, EM, M

• External key switches SCT 220, SCT 221, SCT 222

• Swing door drive TSA 160, Slimdrive EMD

• Control panel TE 220/TTE 220

• External emergency push button NOT 320

• Visualisation software VAT 220 SN

• Terminal T 320

• OPC interface OPC 220

• Uninterruptible power supply (USV)

Note

For further information about the individual system components see the chapter “System components” from page 18 onwards.

System structure

Key switch or card reader on the outside

Panic lock

Signal light

Mains Mains Mains Mains

Signal light

GEZE Bus

Panic lock Panic lock Panic lock

Key switch or card reader on the outside

Distributor bus Distributor bus

GEZE System Documentation RWS GEZE Door Control Unit TZ 300 SN

GEZE Door Control Unit TZ 300 SN

GEZE door control unit TZ 300 UP GEZE door control unit TZ 300 AP

Product features

– 3 LED displays for door modes

• Locked, unlocked

• Door leaf open, closed

• Alarm, pre-alarm – Integrated illuminated emergency push button – integrated key switch for

• Unlocking, short-term release

• Locking

• Alarm reset – Integrated di erentiated acoustic alarm for indication of the pre-alarm or actuation of the emergency push button

– Integrated sabotage protection – Automatic abortion of short-term release when the door is closed – Automatic storage and activation of operating state before and after power failure. – Flush-mounted installation in 3  ush-mounting boxes 62.5 mm deep

The GEZE door control unit TZ 300 SN is part of the SecuLogic escape route system and is used to control and monitor electrically locked doors on emergency exit routes. Doors on emergency exit routes are reliably protected against unauthorised passage by the GEZE door control unit. At the same time, the integrated emergency push button guarantees passage at all times in emergency situations.

Technical product description

Dimensions (B x H x D) Flush-mounted version 81 x 223 x 62.5 mm

Surface-mounted version 77 x 197 x 88 mm

Integrated power supply Flush-mounted version 500 mA, 350 mA for peripherals

Surface-mounted version 800 mA, 350 mA for peripherals

Connections Input for emergency unlocking through hazard alarm system

Input for access control system and timer Potential-free output for optical/acoustic alarm indication or

alarm relaying

Connection possibility for locking elements

Flush-mounted version 2 x FTÖ, 1 x holding magnet

Surface-mounted version 3 x FTÖ, 2 x holding magnet

Area of use Dry rooms

Technical data GEZE door control unit TZ 300 SN

GEZE System Documentation RWS GEZE Door Control Unit TZ 320

GEZE Door Control Unit TZ 320

GEZE door control unit TZ 320 UP GEZE door control unit TZ 320 AP

Product features

– Flexible concept: Available as a tailor-made solution in 3, 2 or 1-box version – Available as  ush-mounted or surface-mounted version

– Surface-mounted version: Also available turned through 180° (emergency push button at the top) – Flush-mounted version: Suitable for all 55-size switch ranges such as those from Berker, Feller, Gira, Jung, Merten – Attractive design – 3 inputs and 2 outputs for more functions – Straightforward installation thanks to clearly separated connections – Parameter setting via the service terminal ST 220 – Operation via integrated power supply (option) – Alarm memory with date and time – Completely compatible with the predecessor version TZ 220

The GEZE door control unit TZ 320 is part of the SecuLogic escape route system and is used to control and monitor electrically locked doors on emergency exit routes. In addition, it o ers numerous interfaces to other products and systems. Swing door drives, motor locks, signal sensors and much more can be connected. Messages to higher-order building management systems or central control via PC or control panel are also possible. Intelligent functions between the door control units can be realised via the GEZE bus system, e.g. air lock functions or circuit-entering and relaying of  re alarm or burglar alarm systems.

Technical product description

Dimensions (B x H x D) Flush-mounted 3-fold 81 x 223 x 62.5 mm

Surface-mounted version 77 x 197 x 88 mm

Integrated power supply Flush-mounted version 500 mA, 350 mA for peripherals

Surface-mounted version 800 mA, 650 mA for peripherals

Connections 3 programmable

inputs for

• Emergency unlocking through hazard alarm system or central emergency push button

• Access control system

• Timer etc.

2 programmable, potential-free outputs for

• Optical/acoustic alarm indication or

• GEZE IQ Lock EL, EM, M or

• Door opener ZuKo or

• Signal light in combination with air lock or

• Output system states

Connection possibility for • Terminal T 320 Input for • Indirect release through central emergency push button

Connection possibility for locking elements

Flush-mounted version 2 x FTÖ, 1 x holding magnet Surface-mounted version 3 x FTÖ, 2 x holding magnet

Area of use Dry rooms

Technical data GEZE door control unit TZ 320

GEZE System Documentation RWS GEZE Terminal Box KL 220

GEZE Terminal Box KL 220

Product features

– Operation of the KL 220 only possible in combination with a TZ 320 – Voltage supply to the TZ 320 via KL 220 – Communication of TZ 320 with KL 220 via RS 485 interface – With sabotage monitoring

Extension of functions of the door control unit TZ 320 by a further 4 inputs and 6 outputs.

Technical product description

Dimensions (H x B x D) Flush-mounted version 107 x 107 x 57 mm

Surface-mounted version 113 x 113 x 58 mm

Installation board 90 x 90 mm Integrated power supply 800 mA, 600 mA for peripherals Connections 4 programmable inputs

6 programmable, potential-free outputs

Connection possibility for locking elements

3 x FTÖ, 2 x holding magnet

Protective class IP 55 ID no. Flush-mounted version 089317

Surface-mounted version 087262

Technical data GEZE terminal box KL 220

GEZE System Documentation RWS GEZE Control Panel TE 220/TTE 220

GEZE Control Panel TE 220/TTE 220

GEZE control panel TE 220 GEZE control panel TE 220

Product features

– Modular design and building-related con guration – Master panel MTA 220 for the convenient control of all functions incl. bus interface – Emergency push button NTA 220 for the central unlocking of all doors on the bus line. – Slave panel STA 220 for operation/display of one respective assigned door control unit. – LED displays for door modes locked/unlocked, open/closed, alarm – Operating panel for unlocking, short-term release, locking – Forming several doors into groups through parameter setting via ST 220 – Blind cover BTA 220 for covering any door modules not used – Protection against misuse through integrated key switch – Power supply for supplying the control panel – Two  ush-mounting boxes 62.5 mm deep are required for  ush-mounted installation

As a control and display unit, the control panel TE 220/TTE 220 is suitable for up to 20 individual door control units via a bus system.

Technical product description

Dimensions Width Variable, depending on the number of doors: max. 884 mm

Height 160 mm Depth 22/55 mm (with/without emergency push button)

Colour Frame and side parts Aluminium, anodised

Operating panel Light grey Mains voltage 230 V AC Operating voltage 24 V DC Current consumption MTA 220 30 mA

NTA 220 30 mA

STA 220 30 mA Protective class IP 20 ID no. TE 220 098283

TTE 220 125920

Technical data GEZE control panel TE 220/TTE 220

GEZE System Documentation RWS Accessories

Accessories

Virtual display and operating panel VAT 220 SN

GEZE Virtual Display and Operating Panel VAT 220 SN

Technical product description

Minimum con guration PC with 586 processor from 500 MHz 64

MB RAM, 2 GB hard disk, CD ROM drive VGA monitor (1024 x 768) 30 MB free memory Windows 98, 2000, XP or Vista

ID no. 105278

Technical data

– For large buildings e.g. shopping centres, hotels, hospitals – Multi-door systems on several levels – Scaleable up to 504 doors – Clearly structured user-friendly interface – Central locking and unlocking of all doors without a server system

being necessary – Display of alarm or door mode – Password protection – Individual control possibilities:

• Speci c locking and unlocking of both all or individual doors

• Unlocking of all the doors connected via a central emergency push button

• Event memory with protocol function

– OPC = OLE for Process Control

The software interface OPC is used in the escape route system for the transmission of data to higher-level building management systems. The OPC interface guarantees simple communication between devices

from di erent manufacturers.

– Up to 8 bus lines with 63 participants each are possible.

OPC

Technical product description

ID no. 107732

Technical data

GEZE System Documentation RWS Accessories

Emergency exit opener type 331

GEZE Emergency Exit Opener Type 331

Technical product description

Resistant against attempts to break open 7500 N Operating voltage 24 V DC Current consumption 160 mA Enclosure rating IP 30

Technical data

– For locking emergency exit doors according to the quiescent current

principle

– Guarantees secure unlocking of the door even when there is a lot of

pressure against the door

– Integrated feedback contacts to monitor door locking (locked/

unlocked) and the door mode (open/closed) – Not suitable for retro tting to  reproof doors – Installation o set from the existing panic lock in connection with latch

lock

Note

Di erent variants can be ordered, see Price List GEZE Safety Technology.

GEZE System Documentation RWS Accessories

– Mortice latch lock as counterpart to the emergency exit door opener – Adjustable latch

Latch lock 807/10

GEZE Latch Lock 807/10

Technical product description

Slideway 5 mm ID no. 076019

Technical data

– For the magnetic locking of emergency exit doors according to the

quiescent current principle – With integrated Hall sensor for locked / unlocked message – Bi-colour LED for indicating state

(green = locked, red = fault) – Complete with counterplate – Suitable for retro tting to  reproof doors – Installation o set from the existing panic lock

– Installation only in connection with the installation set and door

contact

Holding magnet MA 500

GEZE Holding Magnet MA 500

Technical product description

Resistant against attempts to break open 5000 N

Rated operating voltage 24 V DC

Current consumption 250 mA

Connection PG9

ID no. 024740

Technical data

GEZE System Documentation RWS Accessories

Technical data

GEZE Installation Set for MA 500

Technical product description

Screw  tting PG9 Metal tube 400 mm ID

no.

Hinge side silver-coloured 024731 Opposite hinge side silver-

coloured

024732

So t installation silvercoloured

025727

Technical data

– For additional monitoring of the door mode (open/closed) – Non-contact actuation through permanent magnet

(reed contact) with connection cable 2 m

– Use version 069607 for steel doors

GEZE Door Contacts

Technical product description

Switching current 0.5 A Switching voltage 24 V ID no. Flat reed contact with  xture,

reacting distance approx. 10 mm

069288

Flat reed contact with cross hole and mounting base, reacting distance approx. 10 mm

069606

Block reed contact with  xture, reacting distance approx. 20 mm for steel doors

069607

– For installation of the MA 500 on an emergency exit door – Retro tting to a  reproof door only after agreement with the door

manufacturer and use of rivet nuts – Universal  xing possibility thanks to variable hole pattern – Self-locking attachment screws

Installation set for MA 500

Door contacts

GEZE System Documentation RWS Accessories

NOT 220 AP (plastic)

GEZE Emergency Push Button NOT 220 AP (plastic)

Technical product description

Dimensions (W x H x D) 94 x 94 x 122 mm Operating voltage 24 V DC Current consumption 17 mA Enclosure rating IP 65 Colour Grey/light grey ID no. 076777

Technical data

– External emergency push button for release of the emergency exit

door in an emergency – Lighting with long-life LED – Lead-sealable, reusable cover hood – Surface-mounted installation – Complete with “emergency exit” sign – Plastic housing – One-pole opener contact with forced opening – One-pole closer contact with forced opening

– External emergency push button for release of the emergency exit

door in connection with a door control unit – Lighting with long-life LED – Reusable cover hood – Surface-mounted installation – With AP cap Jung AS 500, white WW – One-pole opener contact with forced opening – One-pole closer contact with forced opening

Emergency push button NOT 320 AP

GEZE Emergency Push Button NOT 320 AP

Technical product description

Operating voltage 24 V DC Current consumption approx. 30 mA Enclosure rating IP 20 Dimensions (W x H x D) 55 x 55 x 27 mm

W x H: Slam button D: Distance upper edge supporting ring to rear edge clamps

ID no. 137967

Technical data

GEZE System Documentation RWS Accessories

Technical data

– External emergency push button for release of the

emergency exit door in connection with a door control unit – Lighting with long-life LED – Reusable cover hood – Flush-mounted installation – One-pole opener contact – One-pole closer contact – Note: The frame must be ordered separately.

Emergency push button NOT 320 UP with frame

GEZE Emergency Push Button NOT 320 UP

Technical data

Technical product description

Dimensions (W x H x D) 55 x 55 x 27 mm

W x H: Slam button D: Distance upper edge supporting ring to rear

edge clamps Operating voltage 24 V DC Current consumption approx. 30 mA Enclosure rating IP 20 ID no. 136571

Delivered without frame

– Labelling of all emergency push buttons – Self-adhesive and  uorescent in accordance with DIN 4844-2

GEZE signs for emergency push button

Technical product description

Dimensions (W x H x D) 72 x 72 mm

ID no. Arrow upwards 088090

Arrow downwards 084992

Arrow to the right 100025

Arrow to the left 100017

Signs for the emergency push button

GEZE System Documentation RWS Accessories

Key switch SCT 221

GEZE Key Switch SCT 221

Technical product description

Dimensions (W x H x D)

Flush-mounted version 75 x 75 x 61 mm

Surface-mounted version 75 x 75 x 50 mm Enclosure rating IP 54 ID no. Flush-

mounted version

with pro le half cylinder 054245 without pro le half

cylinder

054240

Surfacemounted version

with pro le half cylinder 054533 without pro le half

cylinder

054532

Technical data

– External key switch for authorised door passage by actuating the short-

term release function by key – Connection to all door control units – Surface-mounted or  ush-mounted installation – With or without pro le half cylinder – Metal housing – One-sided switching operation – One-pole closer – Zamak  ush-mounted box 50 mm deep included in the scope of

supply

– GEZE surface-mounted  xture for mounting the emergency exit route

sign

GEZE  xture for emergency exit sign

Technical product description

ID no. 089361

Technical data

– Flush-mounted unit suitable for switch ranges of the size 55 x 55 mm – Variants: illuminated, non-illuminated

GEZE Emergency Exit Route Sign FWS

Technical product description

ID no. illuminated 130383

non-illuminated 130381

Technical data

Fixture for emergency exit sign

GEZE System Documentation RWS Accessories

– External key switch for authorised door passage by actuating the short-

term release function by key – Connection to all door control units – Flush-mounted installation – Complete with pro le half cylinder in single frame – One-pole reversible switch (2 closers) – With pro le half cylinder

Key switch SCT 220 UP, LS 990 stainless steel

GEZE Key Switch SCT 220 UP

Technical product description

Dimensions (W x H x D) 81 x 81 x 62.5 mm Enclosure rating IP 20 ID

no.

Jung AS 500 alpine

white

115442

LS 990 stainless

steel

094170

Gira E2 pure

white

094012

Technical data

– External operating element for connection to GEZE SecuLogic door

control units – LED left: red/green 24 V DC displaying locked/unlocked – LED right: yellow for 24 V DC for displaying alarm – Connection via integrated terminal strip and RP 220 – Aluminium front plate – Complete with pro le half cylinder – Surface-mounted or  ush-mounted installation

– Switching operating to both sides, one-pole (closer)

Key switch SCT 222 with LED display

GEZE Key Switch SCT 222 with LED display

Technical product description

Dimensions Flush-mounted version Front plate:

110 x 100 mm Flush-mounted box: ap-

prox. 70 x 80 x 45 mm

Surface-mounted (W x H x D)

70 x 80 x 45 mm

Enclosure rating IP 54 ID

no.

with

pro le half cylinder

Flush-mounted version

100065

Surface-mounted version

100064

Technical data

GEZE System Documentation RWS Accessories

Key switch SCT 320

GEZE Key Switch SCT 320

Technical product description

Dimensions (W x H x D) 55 x 55 x 41 mm

W x H: Cover D: Distance upper edge supporting ring to attached clamp

Operating voltage 24 V DC (±10 %)

Enclosure rating IP 20

ID no. white GIRA E2 130370

anthracite 132278

pure white Jung AS 500 131984

Technical data

– External signal horn for acoustic alarm indication – Connection possibility to all door control units – Surface-mounted or  ush-mounted installation – 26 settings for signal tone

Signal horn SLH 220

GEZE Signal Horn SLH 220

– Key switch with sabotage transmission

Technical product description

Dimensions Flush-mounted version 81 x 81 x 62.5 mm

Surface-mounted (Ø x H) 111 x 25,5 mm

Operating voltage 10-28 V DC

Current consumption 16 mA

Enclosure rating Flush-mounted version IP 20

Surface-mounted version

IP 54

ID no. Flush-

mounted version

Jung alpine white 091436

stainless steel

091437

Surface-mounted version 072112

Technical data

GEZE System Documentation RWS Accessories

– External  ashlight for optical alarm indication

– Connection possibility to all door control units – Surface-mounted installation – Sturdy, maintenance-free and fail-safe design, polycarbonate housing – Xenon tubes for high light output

Flashlight BLE 220 AP

GEZE Flashlight BLE 220 AP

Technical product description

Dimensions (Ø x H) 93 x 72 mm

Operating voltage 20-30 V DC

Current consumption 90 mA

Enclosure rating IP 54

Flashing frequency 1 Hz

Re ector colour red

ID no. 089353

Technical data

Signal horn with  ashlight SHB 220 AP

GEZE Signal Horn with Flashlight SHB 220 AP

Technical product description

Dimensions (Ø x H) 111 x 97 mm

Flashing frequency 1 Hz, ± 20 %

Volume max. 94 dB (at a distance of 1 m)

Operating voltage 20-30 V DC

Current consumption max. 110 mA at 24 V DC

Enclosure rating IP 54

Colour white

ID no. 089354

Technical data

– External signal horn with  ashlight for optical and acoustic alarm

indication – Connection possibility to all door control units – Comprising an external signal horn and external  ashlight – Surface-mounted installation

GEZE System Documentation RWS Accessories

– External signal light for optical alarm indication – Connection to all control units – Flush-mounted or surface-mounted installation

Signal light SLE 220

GEZE Signal Light SLE 220

Technical data

– For power supply to various components – For installation in a  ush-mounted box 62.5 mm deep plastic housing,

cast module

Power supply NET 220

GEZE Power Supply NET 220

Technical product description

Dimensions (Ø x D) 50 x 40 mm

Enclosure rating IP 54

Voltage Primary 230 V AC, 50 Hz

Secondary 24 V DC

Current consumption

Primary 0.15 A

Current output Secondary 500 mA, 12 W

ID no. 087243

Technical data

Technical product description

Dimensions (W x H x D) Flush-mounted

version

81 x 81 x 25 mm

Surface-mounted version

61 x 61 x 47 mm

Operating voltage 24 V DC

Current consumption 85 mA

Enclosure rating IP 20

Re ector colour red

ID no. Flush-

mounted version

alpine white 089348

stainless steel 089349

Surfacemounted version

alpine white 080866

GEZE System Documentation RWS Accessories

Power supply NT 19.2-24

GEZE Power Supply NT 19.2-24

Technical data

– For parameter setting and diagnosis in connection with TZ 320,

TZ 320 + KL 220 and TE 220/TTE 220 – For battery operation with 4 micro cells – Integrated IrDA interface – Plain text display of all events, menu items and settings on an

illuminated 4-line display – Automatic cut-o

– Keypad with 5 operating buttons

Service terminal ST 220

GEZE Service Terminal ST 220

Technical data

– For power supply to various components – Plastic housing

Technical product description

Dimensions (W x H x D) 80 x 125 x 37 mm Enclosure rating IP 40 Colour green-blue (similar to RAL

5020)

ID no. 087261

Technical product description

Dimensions (W x H x D) 100 x 32 x 32 mm

Enclosure rating IP 54 Voltage Primary 230 V AC, 50 Hz

Secondary 24 V DC

Current consumption

Primary 0,25 A

Current output Secondary 800 mA, 19.2 W ID no. 089862

GEZE System Documentation RWS Accessories

Relay board RP 220

– For universal use – 2 potential-free changeover contacts

GEZE Relay Board RP 220

Technical product description

Dimensions (W x H x D) 28 x 25 x 18 mm Switching load 30 V / 1 A Operating voltage 24 V DC Current consumption 10 mA ID no. 102355

Technical data

GEZE System Documentation RWS Dimensional drawings

31.5

197

Mounting plate

Door control unit TZ 300 AP

Speci cations in mm

Dimensional drawings

Door control unit TZ 300 AP with emergency push button

GEZE System Documentation RWS Dimensional drawings

55 37

Door control unit TZ 300 UP

Speci cations in mm

GEZE System Documentation RWS Dimensional drawings

77 88

197

31.5

197

Door control unit TZ 322 AP

Door control unit TZ 320 AP with emergency push button

Mounting plate

Speci cations in mm

GEZE System Documentation RWS Dimensional drawings

Jung, AS500

152

223

49 11

Jung, Edelstahl

152

223

49 8

Door control unit TZ 320 UP Jung AS 500

Door control unit UP Jung AS 500

Speci cations in mm

Door control unit TZ 320 UP Jung stainless steel

GEZE System Documentation RWS Dimensional drawings

22.4

200

3 39

27.75 38134.25

21.5

91.5 49

7 186

220

4.9

106.5 64.549

200

42.75 43.25

134

21.7

Emergency exit door opener with short  at strike plate (diagram shows DIN left, DIN right is mirror-inverted)

Emergency exit door opener with short  at strike plate (diagram shows DIN left, DIN right is mirror-inverted)

Emergency exit door opener with short angled strike plate (diagram shows DIN left, DIN right is mirror-inverted)

Speci cations in mm

GEZE System Documentation RWS Dimensional drawings

110

ø5.5

ø10.4

514

Emergency exit door opener with lock latch guide (diagram shows DIN left, DIN right is mirror-inverted)

Speci cations in mm

Latch lock

Set dimension x to approx. 1 mm using the setting screw!

Adjustment from 5 mm (12 - 17 mm) continuously from the housing rear wall possible

GEZE System Documentation RWS Dimensional drawings

Ansicht "A"

266

254`0.1

20`0.1

ø6.4

ø10.3

10`0.1

M6x20

RWS

FFB

8 8

270

155

115

Holding magnet MA 500

Installation set for jamb (cable routing from the top or side)

Diagram sticker 21206-2-0374 applied to the inside of the cover

E-connection (thread)

View “A”

Type plate 21206-2-0279 29535

Status LED

Attachment bracket on the jamb

Drilling template Jamb installation

DIN right

Holding plate on the door

DIN left

Holding plate on the door

Lintel

Holding plate

Lock washer

Attachment bracket

Magnet with counterplate

min 2m clear passage height

required

Door DIN left

Door DIN right

CAUTION

Jamb lock side

Jamb lock

side

Speci cations in mm

GEZE System Documentation RWS Dimensional drawings

RWS

Mat.Nr. 25719

FFB

M6x20

8 8

154

270

146

2626 24

115

20 20

M6x20

RWS

146

16 2423

330

270

2426 33

115

26 33

Installation set for the opposite hinge side (cable routing from the top)

Speci cations in mm

Installation set for hinge side (cable routing from the top or side)

Drilling template Opposite hinge side

Depending on air humidity, paper template can change considerably. For this reason, only our dimensional speci cations are applicable. Before you use the paper template, please check the dimensions and correct them if necessary.

Holding plate

Lock washer

Attachment bracket

Magnet with counterplate

min 2m clear passage height

required

Door DIN left

Door DIN right

CAUTION

Frame lock side

Frame lock

side

Installation bracket

Slideway 33 mm

perforated Centre line

UK frame

Drilling template Hinge side

Lock washer

Attachment bracket

Magnet with counterplate

Door DIN right

Door DIN left

Door edge

lock side

Door edge

lock side

Mounting plate

Slideway 33 mm

OK door

Installation bracket

GEZE System Documentation RWS Dimensional drawings

ø8

1.7

ø8

1.7

23.3

10.3

ø3.2

ø5.8

ø3.2

ø5.5

ø3.2

ø5.5

2.5

2.2

5.2

ø3.2

452

682

4.5

Round reed contact with  xture (reacting distance 5 mm)

Round reed contact with  xture (reacting distance 5 mm)

Flat reed contact with  xture (reacting distance 10 mm)

Flat reed contact with  xture (reacting distance 10 mm)

Connection cable approx. 2 m long

Magnetic housing

Reacting distance: approx. 5 mm

Installation  xtureContact housing

Connection cable approx. 2 m long

Reacting distance: approx. 10 mm

FixtureMagnet Flat reed contact

Speci cations in mm

GEZE System Documentation RWS Dimensional drawings

ø3.2

452

5.5

4.5

ø4.3

5.5

6.5

Speci cations in mm

Flat reed contact with cross hole and mounting base (reacting distance approx. 10 mm)

Block reed contact with mounting base for steel doors (reacting distance 20 mm)

Connection cable approx. 2 m long

Reacting distance: approx. 10 mm

Scope of supply:

1  at reed contact

1 magnet

12 mounting bases

MagnetFlat reed contact with cross hole

Connection cable

approx. 2 m long

Block magnet with mounting base

Reacting distance:

approx. 20 mm

Scope of supply:

1 block magnet

1 block reed contact

6 mounting bases

Block reed contact

GEZE System Documentation RWS Dimensional drawings

122

ø22.5

21206-2-0350 76799

21206-6-0852 24249

21206-1-0114 24463

21206-1-1018 76778

21206-2-0291 69449

Emergency push button 220 AP (plastic housing IP 65)

Bottom part of housing 21206-1-1018

7 x M16/20 break-out

Top part of housing 21206-1-1018

Speci cations in mm

GEZE System Documentation RWS Cable diagrams

71mm

190.00

71.00

24.50

11.75

30.00

23.00

50.00

25.00

7.50

30.00

5.50

22.00

Cable diagrams

Installation instructions

TZ 320 AP and TZ 320 UP

UP versions AP versions

NYM-J 3 x 1.5 with earth conductor -> for mains supply cable

J-Y (ST) Y 2 x 2 x 0.6 -> for peripherals

J-Y (ST) Y 4 x 2 x 0.6 -> for peripherals

Cable types

Installation in standard

 ush-mounted boxes 62.5

mm deep

Distance  ush-mounted boxes

Cable feed 24 V from behind

for variants without power supply.

Cable feed peripherals,

GEZE BUS, messages

Cable feed 230 V from behind in upper

box for variants with power supply.

Recommended height min. 850 mm max. 1200 mm

Emergency push button

Cable feed from behind for

peripherals, GEZE BUS, messages

Cable feed 230 V from behind

for variants with power supply.

Upper edge  nished  ooring (OKFF)

Cables routed in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833

Surface-mounted cables in metal tube or plastic cable channel

with spiral protective tube made of metal.

Only connect components approved by the manufacturer.

Cable routing, connection and start-up may only be carried out by experts.

Installation instructions for the door control unit:

Installation height of the emergency push button: 850 - 1200 mm

Recommended installation height: 850 mm

Installation of the door control unit in the direct vicinity of the emergency

exit doors to be secured.

When a holding magnet is installed, the clear passage height under the

magnet must be at least 2000 mm.

Flush-mounted door control unit:

Number of  ush-mounted boxes required, depth 62.5 mm:

3 boxes with TZ 320 BSN / SN / BN, TZ 300 SN

2 boxes with: TZ 320 S / BN / B / N, TZ 300 S

1 box with: TZ 320 (power supply + SCT external)

Recommended height min. 850 mm max. 1200 mm

GEZE System Documentation RWS Cable diagrams

Active leaf

Fixed leaf

Panic lock

Active leaf

Fixed leaf

Active leaf

Fixed leaf

Active leaf

Fixed leaf

Active leaf

Fixed leaf

Active leaf

Fixed leaf

Mains

Door control unit

TZ 320 SN, UP

Door control unit

TZ 320 SN, AP

2 x holding magnet + door contact 1 x holding magnet + door contact

1 x door contact on  xed leaf

2 x holding magnet + door contact

1 x emergency exit door opener + latch lock

Heed max. power consumption.

Current consumption

per MA 50 = 250 mA

Only on rebated doors Heed max. power consumption.

Current consumption

per MA 50 = 250 mA

Panic lock Panic lock

Panic lock Panic lock Panic lock

2 x emergency exit door opener + latch lock

1 x emergency exit door opener + latch lock

1 x door contact on  xed leaf

3 x emergency exit door opener + latch lock

Only on rebated doors Heed max. power consumption.

Current consumption

per FTÖ 331 = 160 mA

Locking elements 2-leaf

Installation instructions for the door control unit:

Please also heed installation instructions TZ 320 no. 131537 and

sk089-281

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes 62.5 mm deep

Power supply cable in upper box

Supply cables for peripherals in lower box

Installation height of the emergency push button: max. 1200 mm

Recommended installation height: 850 mm

Surface-mounted door control unit:

Cable routing in accordance with sketch

Cable feed 230 V

Cable feed peripherals

Cables routed in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833

Surface-mounted cables in metal tube or plastic cable channel with spiral protective tube made of metal.

Only connect components approved by the manufacturer.

Cable routing, connection and start-up

may only be carried out by experts.

NYM-J (ST) 3 x 1.5 with earth conductor

J-Y(ST)Y 2x2x0.6

J-Y(ST)Y 4x2x0.6

J-Y(ST)Y 2x2x0.8

FTÖ331U Emergency exit opener

FS807-10 Latch lock

USV Emergency power supply

RP220 Relay board

GCDU100 Door unit

GCFP Fingerprint

GCRR / GCVR Card reader

LI-Y (ST) Y 4x2x0.6

GEZE System Documentation RWS Cable diagrams

Standard

TZ 300 SN, UP

Mains

Alarm

message

Flash-

light

Signal

horn

Fire

alarm

system

Timer

Access

control/

intercom

Key

switch

with

display

Key

switch

Door control unit

Panic lock

Installation instructions for the door control unit:

Please also heed installation instructions TZ300 no. 137351

and sk089-281.

Installation height of the emergency push button: 850 - 1200mm

Recommended installation height: 850 mm

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes 62.5 mm deep

Mains supply cable from behind into the upper box

Supply cables for peripherals from behind into the lower box

Surface-mounted door control unit:

Cable routing in accordance with sketch

Cable feed 230V

Cable feed peripherals

Cables routed in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833

Only connect components approved by the manufacturer

Potential-free contact, opener

Potential-free contact, closer, permanent contact

Potential-free contact, closer, impulse

Voltage supply via door control unit possible.

Note maximum power consumption

Potential-free contact (30V/1A) from the TZ

FTö331U Emergency exit opener

FS807-10 Latch lock

USV Emergency power supply

RP220 Relay board

DCDU100 Single Door Unit

GCDU200 Door Unit

GCDU Fingerprint

GCRR / GCVR Card reader

Door contact

Holding magnet

NYM-J 3x1.5 with earth conductor

J-Y (ST) Y 2x2x0.6

J-Y (ST) Y 4x2x0.6

J-Y (ST) Y 2x2x0.8

GEZE System Documentation RWS Cable diagrams

TZ 300 SN AP, IQ Lock C

Mains

Alarm

message

Flash-

light

Signal

horn

Fire

alarm

system

Timer

Access

control/

intercom

Key

switch

with

display

Key

switch

Door control unit

Contact lock

Installation instructions for the door control unit:

Please also heed installation instructions TZ300 no. 137351

and sk089-281.

Installation height of the emergency push button: 850 - 1200mm

Recommended installation height: 850 mm

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes 62.5 mm deep

Mains supply cable from behind into the upper box

Supply cables for peripherals from behind into the lower box

Surface-mounted door control unit:

Cable routing in accordance with sketch

Cable feed 230V

Cable feed peripherals

Cables routed in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833

Only connect components approved by the manufacturer

Potential-free contact, opener

Potential-free contact, closer, permanent contact

Potential-free contact, closer, impulse

Voltage supply via door control unit possible.

Note maximum power consumption

Potential-free contact (30V/1A) from the TZ

FTö331U Emergency exit opener

FS807-10 Latch lock

USV Emergency power supply

RP220 Relay board

DCDU100 Single Door Unit

GCDU200 Door Unit

GCDU Fingerprint

GCRR / GCVR Card reader

KÜ Cable transition

V Distributor on-site

Door contact

Holding magnet

NYM-J 3x1.5 with earth conductor

J-Y (ST) Y 2x2x0.6

J-Y (ST) Y 4x2x0.6

J-Y (ST) Y 2x2x0.8

Empty pipe inner diameter 10mm

Connection cable 10m, scope of supply IQ Lock EM

GEZE System Documentation RWS Cable diagrams

Signal horn 4)

Flashlight 4)

Alarm message 5)

1) Potential-free contact, opener

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

4) Voltage supply via door control unit possible,

note maximum power consumption

5) Potential-free contact, changeover (30 V / 1 A) from the TZ

NYM-J (ST) 3 x 1.5 with earth conductor

J-Y(ST)Y 2x2x0.6

J-Y(ST)Y 4x2x0.6

Door contact

Holding magnet

Panic lock

Fire alarm

system 1)

Timer 2)

Burglar

alarm

system

Access control/

Intercom 3)

Key switch

with display

Key switch

Lock or

unlock 3)

Mains

Number codelock

CTI / CTI B 4)

Door control unit

GEZE BUS

Message

sabotage 5)

Message door

open 5)

Message door

unlocked 5)

J-Y(ST)Y 2x2x0.8

*) 3 inputs and 2 outputs available

FTÖ331U Emergency exit opener

FS807-10 Latch lock

USV Emergency power supply

RP220 Relay board

GCDU100 Door unit

GCFP Fingerprint

GCRR / GCVR Card reader

Installation instructions for the door control unit:

Please also heed installation instructions TZ 320

no. 131537 and sk089-281

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes

62.5 mm deep

Power supply cable in upper box

Supply cables for peripherals in lower box

Installation height of the emergency push button: max. 1200 mm

Recommended installation height: 850 mm

Surface-mounted door control unit:

Cable routing in accordance with sketch

Cables routed in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833

Only connect components approved by the manufacturer.

Cable feed 230 V

Cable feed peripherals

Mains

TZ 320 SN Standard

GEZE System Documentation RWS Cable diagrams

TZ 320 Standard

1-box solution with IQ Lock EL

*) 3 inputs and 2 outputs available

For the IQ Lock at least 1 input and 1 output

are required. 2 inputs and 2 outputs can be

occupied per function by the IQ Lock.

**) Only use power supply approved by GEZE.

NT19.2-24, No. 089862, NET 24-5, No. 111182,

or power supply 1.3 A, No. 078401. Housing on-site.

Installation instructions for door control unit:

Please also heed installation instructions TZ320 or 131537

and sk089-281.

Installation height of the emergency push button: max. 1200 mm

Recommended installation height: 850 mm

Flush-mounted door control unit:

Installation in 2 standard  ush-mounted boxes 62.5 mm deep

24 V supply cable in lower box

Supply cables for peripherals in lower box

Cable routing in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833.

Only connect components approved by the manufacturer.

1) Potential-free contact, opener or closer

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

4) Heed max. power consumption

5) Potential-free contact (30 V / 1 A) from the TZ

 NYM-J 3x1.5 with earth conductor

 J-Y (ST) 2x2x0.6

 J-Y (ST) 4x2x0.6

 J-Y (ST) 2x2x0.8

 Empty pipe inner diameter 10 mm

Connection cable 10 m, scope of supply GEZE IQ LOCK EL

FTÖ331U Emergency exit opener

FS807-10 Latch lock

RP220 Relay board

GCDU100 Door unit

GCFP Fingerprint

GCRR/VR Card reader

NET220 Power supply

MST210 Motor lock control

Mains

230 VAC

50 Hz

Message 5)

Sabotage

Message

Door 5)

open

Message

Door 5)

unlocked

Alarm

message 5)

Flash-

light 4)

Signal

horn 4)

GEZE Bus

Burglar

alarm

system 2)

Fire alarm

system 1)

Timer 2)

Access

control

inter-

com 3)

Key switch

with display

Key switch

Door control unit

TZ320, UP

Emergency exit

route sign non-

illuminated

GEZE IQ Lock EL

Motor lock

Door contact

Holding magnet

GEZE MA500

Mains 230 VAC

GEZE System Documentation RWS Cable diagrams

TZ 320 UP Standard

IQ Lock EM, external power supply

Message 5)

Sabotage

Message

Door 5)

open

Message

Door 5)

unlocked

Alarm

message 5)

Flashlight

Signal

horn 4)

GEZE Bus

Burglar

alarm

system 2)

Fire alarm

system 1)

Timer 2)

Access

control

inter-

com 3)

Key switch

with display

Key switch

Mains 230 VAC

Mains

230 VAC

50 Hz

Door contact

Holding magnet

GEZE MA500

Door control unit

TZ 320 S, UP

GEZE IQ Lock EM

Lever lock

*) 3 inputs and 2 outputs available

For the IQ Lock at least 1 output is required.

2 inputs and 2 outputs can be

occupied per function by the IQ Lock.

**) Only use power supply approved by GEZE.

NT19.2-24, No. 089862, NET 24-5, No. 111182,

or power supply 1.3 A, No. 078401. Housing on-site.

Installation instructions for door control unit:

Please also heed installation instructions TZ320 or 131537

and sk089-281.

Installation height of the emergency push button: max. 1200 mm

Recommended installation height: 850 mm

Flush-mounted door control unit:

Installation in 2 standard  ush-mounted boxes 62.5 mm deep

24 V supply cable in lower box

Supply cables for peripherals in lower box

Cable routing in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833.

Only connect components approved by the manufacturer.

1) Potential-free contact, opener or closer

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

4) Heed max. power consumption

5) Potential-free contact (30 V / 1 A) from the TZ

 NYM-J 3x1.5 with earth conductor

 J-Y (ST) Y 2x2x0.6

 J-Y (ST) Y 4x2x0.6

 J-Y (ST) Y 2x2x0.8

 Empty pipe inner diameter 10 mm

Connection cable 10 m, scope of supply GEZE IQ LOCK EM

FTÖ331U Emergency exit opener

FS807-10 Latch lock

RP220 Relay board

GCDU100 Door unit

GCFP Fingerprint

GCRR/VR Card reader

NET Power supply

V Distributor on-site

GEZE System Documentation RWS Cable diagrams

Burglar

alarm

system 2)

Fire alarm

system 1)

Timer 2)

Access

control

inter-

com 3)

Key switch

with display

Key switch

Lock or

unlock 3)

Mains 230 VAC

Message 5)

Sabotage

Message

Door 5)

open

Message

Door 5)

unlocked

Alarm

message 5)

Flash-

light 4)

Signal

horn 4)

GEZE Bus

TZ320SN Komfort

with IQ Lock EL

Mains

230 VAC

50 Hz

GEZE IQ Lock EL

Motor lock

Door contact

Holding magnet

GEZE MA500

Door control unit

TZ320S

Installation instructions for door control unit:

Please also heed installation instructions TZ320 or 131537

and sk089-281.

Installation height of the emergency push button: max. 1200 mm

Recommended installation height: 850 mm

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes 62.5 mm deep

Mains supply cable in upper box

Supply cables for peripherals in lower box

Cable routing in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833.

Only connect components approved by the manufacturer.

AP door control unit:

Cable routing according to sketch

Cable feed 230 V

Cable feed peripherals

1) Potential-free contact, opener or closer

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

4) Heed max. power consumption for the KL220

5) Potential-free contact (30 V / 1 A) from the TZ

 NYM-J 3x1.5 with earth conductor

 J-Y (ST) Y 2x2x0.6

 J-Y (ST) Y 4x2x0.6

 J-Y (ST) Y 2x2x0.8

 Empty pipe inner diameter 10 mm

Connection cable 10 m, scope of supply GEZE IQ LOCK EM

FTÖ331U Emergency exit opener

FS807-10 Latch lock

KL220 Terminal box

GCDU100 Door unit

GCFP Fingerprint

GCRR/VR Card reader

NET220 Power supply

MST210 Motor lock control

*) There are 4 inputs and 6 outputs on the KL220. If the 3 inputs and/or 2 outputs of the TZ320

are required in addition, more wires must be planned accordingly between KL220 and TZ320.

2 inputs and 2 outputs can be occupied by the IQ Lock depending on the function.

GEZE System Documentation RWS Cable diagrams

Installation height of the emergency push button: max. 1200 mm

Recommended installation height: 850 mm

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes 62.5 mm deep

Mains supply cable in upper box

Supply cables for peripherals in lower box

Cable routing in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833.

Only connect components approved by the manufacturer.

AP door control unit:

Cable routing according to sketch

Cable feed 230 V

Cable feed peripherals

 NYM-J 3x1.5 with earth conductor

 J-Y (ST) Y 2x2x0.6

 J-Y (ST) Y 4x2x0.6

 J-Y (ST) Y 2x2x0.8

 Empty pipe inner diameter 10 mm

FTÖ331U Emergency exit opener

FS Latch lock

MST210 Motor lock control

GCDU100 Door unit

GCFP Fingerprint

GCRR/VR Card reader

NET220 Power supply

MST210 Motor lock control

RSZ Smoke switch control unit

RS Smoke switch

ATÖ Working current door opener ( re protection)

TÜK Door transition cable (GEZE scope of supply)

KÜ Cable transition

Mains

230 VAC

50 Hz

Door control unit

TZ 320 S

Note for securing emergency exit route:

- Please also heed installation instructions TZ 320 (ID no. 131537 and sk089-281)

*) 3 inputs and 2 outputs available

1) Potential-free contact, opener or closer

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

Note for swing door drive:

- Also heed the installation instructions from the product-speci c documents.

Planning documents: TSA 160 NT (ID no. 121988), Slimdrive EMD (ID no. 110450)

- Allow the cable to project at least 1 m out of the wall.

GEZE Bus

Burglar

alarm

system 2)

Fire alarm

system 1)

Timer 2)

Access

control

inter-

com 3)

Key switch

Special

element

Panic lock

Sensor strips

Display

or button

programme

switch

Movement

detector

inside

Movement

detector

outside

Contact

sensor

inside

Contact

sensor

outside

Cut-out

button

Emer-

gency o

button

optional

Main

switch

Close door

TZ 320 SN Standard

TSA160 NT_Slimdrive EMD, 1-leaf “F”

GEZE System Documentation RWS Cable diagrams

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes 62.5 mm deep

Power supply cable in upper box

Supply cables for peripherals in lower box

Installation height of the emergency push button: max. 1200 mm

Recommended installation height: 850 mm

Surface-mounted door control unit:

Cable routing in accordance with sketch

Cables routed in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833

Only connect components approved by the manufacturer.

Cable feed 230 V

Cable feed peripherals

NYM-J (ST) 3 x 1.5 with earth conductor

J-Y(ST)Y 2x2x0.6

J-Y(ST)Y 4x2x0.6

J-Y(ST)Y 2x2x0.8

Note for securing emergency exit route:

- Please also heed installation instructions TZ 320 (ID no. 131537 and sk089-281)

*) 3 inputs and 2 outputs available

FTÖ331U Emergency exit opener

FS Latch lock

RSK Bolt switch contact

GCDU100 Door unit

GCFP Fingerprint

GCRR / GCVR Card reader

NET 220 Power supply

MST210 Motor lock control

RSZ Smoke switch control unit

RS Smoke switch

ATÖ Working current door opener ( re protection)

TÜK Door transition cable (GEZE scope of supply)

KÜ Cable transition

LI-Y (ST) Y 2x2x0.6

Empty pipe inner diameter 10 mm

1) Potential-free contact, opener or closer

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

Note for swing door drive:

- Also heed the installation instructions from the product-speci c documents.

Planning documents: TSA 160 NT (ID no. 121988), Slimdrive EMD (ID no. 110450)

- Allow the cable to project at least 1 m out of the wall.

Active leaf

Fixed leaf

Panic lock

Display

or button

programme

switch

Movement

detector

inside

GEZE Bus

Burglar

alarm

system 2)

Fire alarm

system 1)

Timer 2)

Access

control

inter-

com 3)

Key switch

Mains

230 VAC

50 Hz

Door control unit

TZ 320 SN

Movement

detector

outside

Contact

sensor

inside

Contact

sensor

outside

Cut-out

button

Emer-

gency o

button

optional

Main

switch

Special

element

Sensor stripsSensor strips

TZ 320 SN Standard

TSA 160 NT Slimdrive EMD, 2-leaf

Close door

GEZE System Documentation RWS Cable diagrams

2  oors with 1x TE 220 / TTE 220

Mains

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Panic lock Panic lock

Panic lock Panic lock Panic lock Panic lock

Panic lock Panic lock

Fire alarm system

Burglar alarm system

Message Door mode

Message Locked

Message Alarm

Door contact

Holding magnet

Installation instructions for the door control unit:

Please also heed installation instructions TZ300 no. 137351

and sk089-281.

Installation height of the emergency push button: 1200mm

Recommended installation height: 850 mm

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes 62.5 mm deep

Mains supply cable from behind into the upper box

Supply cables for peripherals from behind into the lower box

1) Potential-free contact, opener

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

4) Voltage supply via door control unit possible.

Note maximum power consumption

5) Potential-free contact (30V/1A) from the TZ

FTö331U Emergency exit opener

FS807-10 Latch lock

USV Emergency power supply

TE220 Control panel

TT220 Table-top control panel

VB Bus distributor on-site

installed near the door

VN Mains distributor on-site

TS5000 Door closer

NYM-J 3x1.5 with earth conductor

J-Y (ST) Y 2x2x0.6

J-Y (ST) Y 4x2x0.6

J-Y (ST) Y 2x2x0.8

Installation instructions for control panel:

Please also heed installation instructions in the user manual

Control Panel no. 10786.

2 standard  ush-mounted boxes 6.25 mm deep are required

behind the control panel for installation.

The control panels TE220/TTE220 can be positioned

anywhere in the bus line.

Cables routed in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833

Only connect components approved by the manufacturer

Overall length of BUS (over all control panels and door control units) max. 900m.

The  re alarm system and burglar alarm system can be connected to one TZ320 and relayed via the GEZE bus to all other TZ320s.

5  re alarm or EMA lines can be realised. Only 1 line can be connected to one TZ320.

All messages can also be connected separately to the respective door control units.

The messages ‚Alarm‘, ‚Locked‘ and ‚Door mode‘ can be outputted as a collective message from one TZ320.

 oor

Ground  oor

GEZE System Documentation RWS Cable diagrams

2  oors with 1x VAT 220 SN + TCP/IP

Mains

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

outside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Key switch

without

card reader

on the

inside

Panic lock Panic lock

Panic lock Panic lockPanic lock Panic lock

Panic lock Panic lock

Fire alarm system

Burglar alarm system

Message Door mode

Message Locked

Message Alarm

Door contact

Holding magnet

Installation instructions for the door control unit:

Please also heed installation instructions TZ300 no. 137351

and sk089-281.

Installation height of the emergency push button: 1200mm

Recommended installation height: 850 mm

Flush-mounted door control unit:

Installation in 3 standard  ush-mounted boxes 62.5 mm deep

Mains supply cable from behind into the upper box

Supply cables for peripherals from behind into the lower box

NYM-J 3x1.5 with earth conductor

J-Y (ST) Y 2x2x0.6

J-Y (ST) Y 4x2x0.6

J-Y (ST) Y 2x2x0.8

1) Potential-free contact, opener

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

4) Voltage supply via door control unit possible.

Note maximum power consumption

5) Potential-free contact (30V/1A) from the TZ

FTö331U Emergency exit opener

FS807-10 Latch lock

USV Emergency power supply

VAT220SN Visualisation software

(PC on-site)

VB Bus distributor on-site

installed near the door

VN Mains distributor on-site

TS5000 Door closer

Overall length of BUS (over all control panels and door control units) max. 900m.

The  re alarm system and burglar alarm system can be connected to one TZ320 and relayed via the GEZE bus to all other TZ320s.

5  re alarm or EMA lines can be realised. Only 1 line can be connected to one TZ320.

All messages can also be connected separately to the respective door control units.

The messages ‚Alarm‘, ‚Locked‘ and ‚Door mode‘ can be outputted as a collective message from one TZ320.

Installation instructions for visualisation software VAT220SN:

Please also heed installation instructions from user manual

VAT220SN no. 098316, as well as the installation drawing

no. 35204-9-0955.

The VAT220SN can be positioned anywhere in the bus line.

Cables routed in accordance with VDE 0100

Sabotage-proof cable routing in accordance with VDE 0833

Only connect components approved by the manufacturer

On-site TCP/IP network

to further PCs

On-site TCP/IP network

USB dongle

USB port

 oor

Ground  oor

GEZE System Documentation RWS Cable diagrams

4  oors with 1x VAT 220 SN + TCP/IP

Mains 250V AC 50Hz

On-site TCP/IP network to further PCs

On-site TCP/IP network

USB dongles

Line 1-4

USB port

Panic lock

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without card reader on the inside

Key switch without card reader on the outside

Key switch without

card reader on the inside

Installation height of the emergency push button: 1200mm Recommended installation height: 850 mm

Flush-mounted door control unit: Installation in 3 standard  ush-mounted boxes 62.5 mm deep Mains supply cable from behind into the upper box Supply cables for peripherals from behind into the lower box

NYM-J 3x1.5 with earth conductor J-Y (ST) Y 2x2x0.6 J-Y (ST) Y 4x2x0.6 J-Y (ST) Y 2x2x0.8

FTö331U Emergency exit opener FS807-10 Latch lock USV Emergency power supply VAT220SN Visualisation software (PC on-site) VB Bus distributor on-site installed near the door VN Mains distributor on-site TS5000 Door closer

Installation instructions for visualisation software VAT220SN: Please also heed installation instructions from user manual VAT220SN no. 098316, as well as the installation drawing no. 35204-9-0955.

The VAT220SN can be positioned anywhere in the bus line.

Cables routed in accordance with VDE 0100 Sabotage-proof cable routing in accordance with VDE 0833 Only connect components approved by the manufacturer

Installation instructions for the door control unit: Please also heed installation instructions TZ300 no. 137351 and sk089-281.

1) Potential-free contact, opener

2) Potential-free contact, closer, permanent contact

3) Potential-free contact, closer, impulse

4) Voltage supply via door control unit possible. Note maximum power consumption

5) Potential-free contact (30V/1A) from the TZ

Overall length of BUS (over all control panels and door control units) max. 900m.

The  re alarm system and burglar alarm system can be connected to one TZ320 and relayed via the GEZE bus to all other TZ320s. 5  re alarm or EMA lines can be realised. Only 1 line can be connected to one TZ320. All messages can also be connected separately to the respective door control units. The messages ‚Alarm‘, ‚Locked‘ and ‚Door mode‘ can be outputted as a collective message from one TZ320.

Fire alarm system

Burglar alarm system

Message Door mode

Message Locked

Message Alarm

Door contact

Holding magnet

1st  oor

Ground  oor

2nd  oor

3rd  oor

GEZE System Documentation RWS Notes

Notes

GEZE GmbH P.O. Box 1363 71226 Leonberg Germany

GEZE GmbH Reinhold-Vöster-Straße 21-29

71229 Leonberg Germany Telefon +49 (0) 7152-203-0 Telefax +49 (0) 7152-203-310

www.geze.com

Germany

GEZE Sonderkonstruktionen GmbH Planken 1 97944 Boxberg-Schweigern Tel. +49 (0) 7930-92 94-0 Fax +49 (0) 7930-92 94-10 E-Mail: sk.de@geze.com

GEZE GmbH Niederlassung Nord/Ost

Bühringstraße 8 13086 Berlin (Weissensee) Tel. +49 (0) 30-47 89 90-0 Fax +49 (0) 30-47 89 90-17 E-Mail: berlin.de@geze.com

GEZE GmbH Niederlassung West Nordsternstraße 65 45329 Essen Tel. +49 (0) 201-83 082-0 Fax +49 (0) 201-83 082-20 E-Mail: essen.de@geze.com

GEZE GmbH Niederlassung Mitte Adenauerallee 2 61440 Oberursel (b. Frankfurt) Tel. +49 (0) 6171-63 610-0 Fax +49 (0) 6171-63 610-1 E-Mail: frankfurt.de@geze.com

GEZE GmbH Niederlassung Süd Breitwiesenstraße 8 71229 Leonberg Tel. +49 (0) 7152-203-594 Fax +49 (0) 7152-203-438 E-Mail: leonberg.de@geze.com

GEZE Service GmbH NL Südwest Reinhold-Vöster-Straße 25 71229 Leonberg Tel. +49 (0) 7152-92 33 34

GEZE Service GmbH NL Nord-Ost Bühringstraße 8 13086 Berlin (Weissensee) Tel. +49 (0) 30-47 02 17 32

GEZE Service GmbH NL West Nordsternstraße 65 45329 Essen Tel. +49 (0) 201-8 30 82 16

GEZE Service GmbH NL Mitte Feldbergstraße 59 61440 Oberursel Tel. +49 (0) 6171-63 327-0

GEZE Service GmbH NL Süd Parkring 17 85748 Garching bei München Tel. +49 (0) 89-120 07 42-0

Austria

GEZE Austria Wiener Bundesstrasse 85 A-5300 Hallwang Tel: +43/6225/87180 Fax: +43/6225/87180-299 E-Mail: austria.at@geze.com

Baltic States

GEZE GmbH Baltic States o ce Dzelzavas iela 120 S 1021 Riga Tel. +371 (0) 67 89 60 35 Fax +371 (0) 67 89 60 36 E-Mail: o ce-latvia@geze.com

Benelux

GEZE Benelux B.V. Leemkuil 1 Industrieterrein Kapelbeemd 5626 EA Eindhoven Tel. +31 (0) 40-26 290-80 Fax +31 (0) 40-26 290-85 E-Mail: benelux.nl@geze.com

Bulgaria

GEZE Bulgaria - Trade Representative O ce 61 Pirinski Prohod, entrance „B“, 4th  oor, o ce 5, 1680 So a

Tel. +359 (0) 24 70 43 73 Fax +359 (0) 24 70 62 62 E-Mail: o ce-bulgaria@geze.com

India

GEZE India Private Ltd. MF 2 & 3, Guindy Industrial Estate Ekkattuthangal Chennai 600 097 Tamilnadu Tel. +91 (0) 44 30 61 69 00 Fax +91 (0) 44 30 61 69 01 E-Mail: o ce-india@geze.com

Italy

GEZE Italia Srl Via Giotto, 4 20040 Cambiago (MI) Tel. +39 (0) 29 50 695-11 Fax +39 (0) 29 50 695-33 E-Mail: italia.it@geze.com

GEZE Engineering Roma Srl Via Lucrezia Romana, 91 00178 Roma Tel. +39 (0) 6-72 65 311 Fax +39 (0) 6-72 65 3136 E-Mail: roma@geze.biz

Poland

GEZE Polska Sp.z o.o. ul. Annopol 21 03-236 Warszawa Tel. +48 (0) 22 440 4 440 Fax +48 (0) 22 440 4 400 E-Mail: geze.pl@geze.com

Romania

GEZE Romania s.r.l. IRIDE Business Park, Str. Dimitrie Pompeiu nr. 9-9a, Building 10, Level 2, Sector 2, 020335 Bucharest Tel.: +40 (0) 21 25 07 750 Fax: +40 (0) 21 25 07 750 E-Mail: o ce-romania@geze.com

Russian Federation

GEZE GmbH Representative O ce Russia Kolodesnij pereulok3, str. 25 O ce Nr. 5201-5203 107076 Moskau Tel. +7 (0) 49 55 89 90 52 Fax +7 (0) 49 55 89 90 51 E-Mail: o ce-russia@geze.com

Scandinavia – Sweden

GEZE Scandinavia AB Mallslingan 10 Box 7060 18711 Täby, Sweden Tel. +46 (0) 8-7323-400 Fax +46 (0) 8-7323-499 E-Mail: sverige.se@geze.com

Scandinavia – Norway

GEZE Scandinavia AB avd. Norge Industriveien 34 B 2073 Dal Tel. +47 (0) 639-57 200 Fax +47 (0) 639-57 173 E-Mail: norge.se@geze.com

Scandinavia – Finland

Branch o ce of GEZE Scandinavia AB Herralantie 824 Postbox 20 15871 Hollola Tel. +358 (0) 10-40 05 100 Fax +358 (0) 10-40 05 120 E-Mail:  nland.se@geze.com

Scandinavia – Denmark

GEZE Danmark

Branch o ce of GEZE Scandinavia AB Mårkærvej 13 J-K 2630 Taastrup Tel. +45 (0) 46-32 33 24 Fax +45 (0) 46-32 33 26 E-Mail: danmark.se@geze.com

South Africa

DCLSA Distributors (Pty.) Ltd. 118 Richards Drive, Halfway House, Ext 111 P.O. Box 7934, Midrand 1685 Tel. +27 (0) 1131 58 286 Fax +27 (0) 1131 58 261 E-Mail: info@dclsa.co.za

Switzerland

GEZE Schweiz AG Bodenackerstrasse 79 4657 Dulliken Tel. +41 (0) 62-285 54 00 Fax +41 (0) 62-285 54 01 E-Mail: schweiz.ch@geze.com

Turkey

GEZE GmbH Türkiye - İstanbul İrtibat Bürosu

Ataşehir Bulvarı, Ata 2/3 Plaza Kat: 9 D: 84 Ataşehir Kadıköy / İstanbul Tel. + 90 (0) 21 64 55 43 15 Fax + 90 (0) 21 64 55 82 15 E-Mail: o ce-turkey@geze.com

Ukraine

GEZE Ukraine TOV ul. Viskoznaya, 17, Building 93-B, O ce 12 02094 Kiev Tel./Fax +38 (0) 44 501 22 25 Tel. +38 (0) 44 499 77 25 E-Mail: o ce-ukraine@geze.com

United Arab Emirates/GCC

GEZE Middle East P.O. Box 17903 Jebel Ali Free Zone Dubai Tel. +971 (0) 4-88 33 112 Fax +971 (0) 4-88 33 240 E-Mail: geze@emirates.net.ae

United Kingdom

GEZE UK Ltd. Blenheim Way Fradley Park

Lich eld Sta ordshire WS13 8SY Tel. +44 (0) 1543 44 30 00 Fax +44 (0) 1543 44 30 01 E-Mail: info.uk@geze.com

China

GEZE Industries (Tianjin) Co., Ltd. Shuangchenzhong Road Beichen Economic Development Area (BEDA) Tianjin 300400, P.R. China Tel. +86 (0) 22-26 97 39 95-0 Fax +86 (0) 22-26 97 27 02 E-Mail: Sales-info@geze.com.cn

GEZE Industries (Tianjin) Co., Ltd.

Branch O ce Shanghai Unit 25N, Cross Region Plaza No 899, Ling Ling Road, XuHui District 200030 Shanghai, P.R China Tel. +86 (0) 21-523 40 960 Fax +86 (0) 21-644 72 007 E-Mail: chinasales@geze.com.cn

GEZE Industries (Tianjin) Co., Ltd. Branch O ce Guangzhou Room 17C3 Everbright Bank Building, No.689 Tian He Bei Road 510630 Guangzhou P.R. China Tel. +86 (0) 20-38 73 18 42 Fax +86 (0) 20-38 73 18 34 E-Mail: chinasales@geze.com.cn

GEZE Industries (Tianjin) Co., Ltd Branch O ce Beijing Room 1001, Tower D Sanlitun SOHO No. 8, Gongti North Road, Chaoyang District 100027 Beijing, P.R.China Tel. +86 (0) 10-59 35 93 00 Fax +86 (0)10-59 35 93 22 E-Mail: chinasales@geze.com.cn

France

GEZE France S.A.R.L. ZAC de l’Orme Rond RN 19 77170 Servon Tel. +33 (0) 1-60 62 60-70 Fax +33 (0) 1-60 62 60-71 E-Mail: france.fr@geze.com

Hungary

GEZE Hungary Kft. Bartók Béla út 105-113.

Budapest H-1115 Tel. +36 (1) 481 4670 Fax +36 (1) 481 4671 E-Mail: o ce-hungary@geze.com

Iberia

GEZE Iberia S.R.L. Pol. Ind. El Pla C/Comerc, 2-22, Nave 12 08980 Sant Feliu de Llobregat (Barcelona) Tel. +34 9-02 19 40 36 Fax +34 9-02 19 40 35 E-Mail: info@geze.es

GEZE SAFETY TECHNOLOGY

ID no. 132410 · Vers. EN 110715 · Subject to alterations

According to manufacturer’s liability de ned

in the “product liability law”, the manufacturer

is obliged to provide the information (product

information and proper use, misuse, product

capacity, product maintanence, the duty to in-

form and the duty to instruct) contained in this

brochure. Non-obser vance of this information

relieves the manufacturer from any liability.

GEZE representative

The

measure

for our actions

GEZE SecuLogic RWS TZ 300, SecuLogic RWS TZ 320 Komfort, SecuLogic RWS TZ 320 Standard System Documentation

Specifications and Main Features

Frequently Asked Questions

User Manual