Getac Technology BWC2 Users manual



VERETOS MVS

Body-Worn Camera

BWC BC-02

1

.

Unpacking

QUICK START GUIDE

2

.

Identifying Components

3

.

Attaching to the Mount

4

.

Docking

BWC BC-02 Body-Worn Camera

Chest mount

Molle mount

Charging dock

Adapter plug

561588240001 R00

To attach the camera to the mount:

1. Aligning the tongues and grooves, slide
the mount downwards to the camera
until the two fit and click into place.

2. Slide the latch inwards to secure the

No. Description

On/Off Button: Wi-Fi wake-up supported



Microphone



Power Status LED



Camera Status LED



Mode Switch (Normal/Covert)



HD Camera Lens



Wheel Switch (C1/C2/C3/C4)



Main Button (Start/Stop/Mark/Confirm)



Speaker



Dock Connector: Connects to the
charging dock.

Interlocking Grooves: Fit the tongues of
the chest/molle mount.

camera to the mount.

To detach:

1. Slide the latch outwards to the unlocked
position.

2. Slide the camera off the mount.

1. Connect the power cable to the adapter
plug ().

2. Connect the adapter plug to an electrical
outlet (

3. Put BWC BC-02 in the charging dock.

The LED on the dock lights up to indicate
power is connected.

)



5

.

Notices

6

.

More Information

FCC Regulations

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.

To assure continued compliance, follow the
attached installation instructions and do
not make any unauthorized modifications.

Warning:
To assure continued FCC emission limit
compliance, the user must only use shielded
interface cables when connecting to external
units. Also, any unauthorized changes or
modifications to this equipment could void
the user’s authority to operate this device.

For detailed information of the product, go
to Getac web link at
 Support.

http://www.getac.com