Getac Technology 300, 302 Users manual
User’s Manual
(November 2007)
TRADEMARKS
The Bluetooth
Bluetooth SIG, Inc.
All other brand and product names are trademarks or registered trademarks of
their respective owners.
NOTE
The information in this manual is subject to change without notice.
®
word mark and logos are registered trademarks owned by
Table of Contents
Preface .....................................................................................vi
Chapter 1 Getting Started...................................................1-1
Getting the Computer Running ............................................ 1-2
Unpacking ........................................................................ 1-2
Connecting to AC Power ................................................. 1-2
Opening the Cover ........................................................... 1-4
Turning On and Off the Computer................................... 1-4
Taking a Look at the Computer............................................ 1-6
Right-Side Components ................................................... 1-6
Left-Side Components ..................................................... 1-9
Rear Components ........................................................... 1-10
Front Components.......................................................... 1-11
Bottom Components....................................................... 1-12
Top-open Components ................................................... 1-13
Where to Go from Here...................................................... 1-17
Chapter 2 Operating Your Computer.................................2-1
Starting and Stopping the Computer .................................... 2-2
Starting the Computer ...................................................... 2-2
Stopping the Computer .................................................... 2-2
Using the Quick Buttons ...................................................... 2-4
Using the Internal Keyboard ................................................ 2-6
Typewriter Keys............................................................... 2-6
Cursor-Control Keys ........................................................ 2-7
Numeric Keypad .............................................................. 2-7
Function Keys .................................................................. 2-8
Fn Key.............................................................................. 2-8
i
Hot Keys .......................................................................... 2-8
Using the Touchpad ........................................................... 2-11
Configuring the Touchpad ............................................. 2-13
Using the Touchscreen (Optional) ..................................... 2-14
Using the Hard Disk Drive................................................. 2-16
Installing a Second Hard Disk Drive (Optional)............ 2-16
Using the Optical Drive (Optional) .................................... 2-18
Inserting and Removing a Disc ...................................... 2-19
Using the Video Features ................................................... 2-21
Configuring the Display Modes ..................................... 2-21
Using the Audio Features................................................... 2-23
Connecting Audio Devices ............................................ 2-24
Using the Communication Features ................................... 2-25
Using the Modem........................................................... 2-25
Using the LAN ............................................................... 2-26
Using the Wireless LAN ................................................ 2-27
Using the Bluetooth
®
Feature......................................... 2-30
Using the Fingerprint Sensor.............................................. 2-35
Enrolling Fingerprints .................................................... 2-37
Changing the Settings .................................................... 2-39
Chapter 3 Managing Power ................................................3-1
AC Adapter .......................................................................... 3-2
Battery Pack ......................................................................... 3-3
Charging the Battery Pack ............................................... 3-3
Initializing the Battery Pack............................................. 3-4
Checking the Battery Level.............................................. 3-4
Replacing the Battery Pack .............................................. 3-5
Installing a Second Battery Pack (Optional) .................... 3-6
Battery Low Signals and Actions..................................... 3-9
Power Management............................................................ 3-10
Hibernation..................................................................... 3-11
Power-Saving Tips ............................................................. 3-12
ii
Chapter 4 Expanding Your Computer ...............................4-1
Connecting an External Monitor .......................................... 4-2
Connecting a Serial Device .................................................. 4-4
Connecting a USB Device.................................................... 4-6
Connecting an IEEE 1394 Device........................................ 4-7
Using Smart Cards (Optional).............................................. 4-8
Inserting and Removing a Smart Card ............................. 4-8
Using PC Cards .................................................................. 4-10
Inserting and Removing a PC Card................................ 4-10
Using ExpressCards (Optional).......................................... 4-12
ExpressCard Type .......................................................... 4-12
Inserting and Removing an ExpressCard ....................... 4-13
Using the Card Reader ....................................................... 4-14
Using the Port Replicator (Optional).................................. 4-16
System Memory Upgrade................................................... 4-17
Chapter 5 Using BIOS Setup..............................................5-1
When and How to Use BIOS Setup ..................................... 5-2
When to Use..................................................................... 5-2
Starting BIOS Setup......................................................... 5-2
Moving Around and Making Selections .......................... 5-4
Information Menu ................................................................ 5-5
Main Menu ........................................................................... 5-6
Advanced Menu ................................................................... 5-7
Security Menu ...................................................................... 5-9
Boot Menu.......................................................................... 5-11
Exit Menu........................................................................... 5-12
When and How to Use the System Recovery Feature........ 5-13
When to Use................................................................... 5-13
Starting System Recovery .............................................. 5-13
Chapter 6 Using the TPM and P1 Utility............................6-1
Using TPM (Trusted Platform Module)............................... 6-2
P1 Quick Launch Key Utility............................................... 6-3
iii
Chapter 7 Caring for the Computer ...................................7-1
Protecting the Computer....................................................... 7-2
Using the Windows Security Center ................................ 7-2
Using the Cable Lock....................................................... 7-4
Taking Care of the Computer............................................... 7-5
Location Guidelines ......................................................... 7-5
General Guidelines........................................................... 7-5
Cleaning Guidelines ......................................................... 7-6
Battery Pack Guidelines................................................... 7-6
Touchscreen Guidelines ................................................... 7-7
When Traveling.................................................................... 7-9
Chapter 8 Troubleshooting.................................................8-1
Preliminary Checklist........................................................... 8-2
Solving Common Problems.................................................. 8-3
Battery Problems.............................................................. 8-4
Bluetooth Wireless Transmission Problems..................... 8-4
Display Problems ............................................................. 8-5
ExpressCard Problems ..................................................... 8-6
Hardware Device Problems.............................................. 8-6
Hard Disk Drive Problems ............................................... 8-7
Keyboard, Mouse, and Touchpad Problems .................... 8-7
LAN Problems ................................................................. 8-8
WLAN Problems.............................................................. 8-8
Modem Problems ........................................................... 8-10
Optical Drive Problems.................................................. 8-10
PC Card Problems .......................................................... 8-11
Power Management Problems........................................ 8-12
Software Problems ......................................................... 8-13
Sound Problems ............................................................. 8-13
Startup Problems ............................................................ 8-14
Other Problems............................................................... 8-14
Resetting the Computer...................................................... 8-15
iv
Appendix A Specifications ................................................... A-1
Appendix B Regulatory Information ....................................B-1
On the Use of the System.....................................................B-2
Class B Regulations .........................................................B-2
Safety Notices ..................................................................B-3
On the Use of the RF Device................................................B-6
USA and Canada Safety Requirements and Notices........B-6
European Union CE Marking and Compliance Notices ..B-9
电子信息产品有毒有害物质或元素名称及含量标示....B-13
v
Preface
This manual contains information that will help you operate the
computer. It is divided into 8 chapters and 2 appendices.
z Chapter 1, Getting Started, takes you through the process of setting
up the computer and identifying its external components.
z Chapter 2, Operating Your Computer, tells you how to use the
computer’s components and features.
z Chapter 3, Managing Power, provides information on power.
z Chapter 4, Expanding Your Computer, provides information on
installing and using peripheral devices.
z Chapter 5, Using BIOS Setup, describes the BIOS Setup program
that configures the computer’s BIOS settings.
z Chapter 6, Using the TPM and P1 Utilities, describes how to use
TPM (Trusted Platform Module) and P1 quick launch key utilities.
z Chapter 7, Caring for the Computer, gives you tips in care and
maintenance.
z Chapter 8, Troubleshooting, gives solutions to common problems
you may encounter when using the computer.
z Appendix A, Specifications, gives a brief specification of the
computer.
z Appendix B, Regulatory Information, provides regulatory
statements and safety notices on your computer.
vi
Notational Conventions
Throughout this manual, the following conventions are used to
distinguish elements of text.
NOTE: identifies additional information that requires special attention.
CAUTION: identifies important information that, if not followed, may result in loss of
data or damage to the computer.
Keyboard keys are shown in a bold typeset. For example:
Press the
Enter key to complete.
When keys are joined by a plus sign (+), press the first key, and, while
keeping the first key down, press the remaining keys, finally release all
the keys. When necessary, keys are also shown in graphics.
A title, command, setup item, or button that you can see on the screen is
shown in boldface. A value or an option that you can select for a setup
item is shown in italic. For example:
Select When I press the power button, set it to Shut down, and
then click the Save changes button.
vii
Chapter 1
CHAPTER
Getting Started
Congratulations on purchasing this rugged computer.
This chapter first tells you step by step how to get the computer up and
running. You will find instructions for these procedures:
z Unpacking
z Connecting to AC power
z Opening and closing the cover
z Turning on the computer
z Turning off the computer
Then, you will find a section briefly introducing the external components
of the computer. And the last section navigates you to the information you
may need after the computer is ready for use.
Getting Started 1-1
Getting the Computer Running
This section guides you through the procedures for getting the computer
ready for operation.
Unpacking
After unpacking the shipping carton, you should find these standard
items:
z Rugged computer
z Accessories:
− AC adapter
− AC power cord
− Touchscreen pen (depending on your model)
Inspect all the items. If any item is damaged or missing, notify your dealer
immediately.
Keep the shipping carton and packing materials in case you need to ship
or store the computer in the future.
Connecting to AC Power
The computer operates either on the external AC power or internal battery
power. It is suggested that you use AC power when you start up the
computer for the very first time.
CAUTION: Use only the AC adapter included with your computer. Using other AC
Getting Started 1-2
adapters may damage the computer.
1. Make sure that the computer is turned off.
2. Plug the DC cord of the AC adapter to the power connector of the
computer (n).
3. Plug the female end of the AC power cord to the AC adapter and the
male end to an electrical outlet (o).
4. Power is being supplied from the electrical outlet to the AC adapter
and onto your computer. Now, you are ready to turn on the computer.
5. When the AC adapter is connected, it also charges the battery pack.
The Battery Charge Indicator on the computer glows amber to
indicate that charging is in progress. When the battery is fully
charged, the Battery Charge Indicator (
) glows green. (For
information on using battery power, see Chapter 3.)
CAUTION:
z When you disconnect the AC adapter, disconnect from the electrical outlet first and
then from the computer. A reverse procedure may damage the AC adapter or the
computer.
Getting Started 1-3
z When unplugging the connector, always hold the plug head. Never pull on the cord.
Opening the Cover
CAUTION: Be gentle when opening and closing the cover. Opening it vigorously or
slamming it shut could damage the computer.
Open the top cover by pushing on the cover latch (n) and lifting up the
cover (o). You can tilt the cover forward or backward for optimal
viewing clarity.
Turning On and Off the Computer
Turning On
1. Make sure that the computer is connected to AC power or battery is
fully charged.
Getting Started 1-4
2. Press the power button ( ).
3. Each time the computer is turned on, it performs a Power-On Self
Test (POST), and the Windows operating system should start.
Turning Off
To turn off the computer power, use the “Shut Down” command of your
operating system.
NOTE: There are other ways you can stop the computer so that you will be back to
where you left off when you next turn on the computer. (See “Stopping the Computer” in
Getting Started 1-5
Chapter 2 for information.)
CAUTION: If you have to turn the computer on again immediately after turning it off,
wait for at least five seconds. Turning the computer off and on rapidly can damage it.
Taking a Look at the Computer
This section identifies the external components of the computer and
briefly describes the function of each component.
NOTE: Depending on the model you purchased, the appearance of your computer may
not be exactly the same as those shown in this manual.
Right-Side Components
NOTE: You may need to open the covers to be able to see the right-side components.
Ref Component Description See Also
Expansion Card
n
Slot
ExpressCard Slot
PCMCIA Slot
Getting Started 1-6
Depending on your model, the expansion card
slot can be any of the following:
Accepts an ExpressCard/34 / ExpressCard/54
for additional functions.
Accepts a PC card for additional functions. P. 4-10
P. 4-12
Ref Component Description See Also
Mini IEEE 1394
o
Port
RF (radio
p
frequency) On/Off
Switch
Card Reader
q
RJ-11 Connector
r
Hard Disk Drive
s
Compartment
USB Ports
t
Expansion Card
u
Slot
Smart Card
Reader
PCMCIA Slot
Audio Output
v
Connector
Connects an IEEE 1394 device such as a
scanner, printer, DVCAM, VCR, and more.
Serves as the master control that turns the
wireless LAN radio, Bluetooth radio, on/off.
Accepts a MultiMediaCard (MMC), Secure
Digital (SD), Memory Stick (MS) or Memory
Stick PRO (MS PRO) card for removable
storage media.
Connects the telephone line. P. 2-25
Inside is the hard disk drive. P. 2-16
Each of the two ports connects a USB device,
such as a USB flash disk, printer, digital
camera, joystick, and more.
Depending on your model, the expansion card
slot can be any of the following:
Accepts a smart card for additional security
feature.
Accepts a PC card for additional functions. P. 4-10
Connects a set of headphones, external
speakers with amplifier, or an audio recording
device.
P. 4-7
P. 2-28,
2-30
P. 4-14
P. 4-6
P. 4-8
P. 2-24
Microphone
w
Connector
RJ-45 Connector
Connects an external microphone. P. 2-24
Connects the LAN cable. P. 2-26
Getting Started 1-7
Left-Side Components
NOTE: You may need to open the covers to be able to see the left-side components.
Ref Component Description See Also
Battery Pack
n
Media Bay
o
Combo Drive/
DVD Dual Drive/
Super Multi
Drive
Secondary
Battery Pack
Secondary Hard
Disk Drive
Getting Started 1-8
Supplies power to your computer when
external power is not connected.
Depending on your model, the media bay may
contain any of the following:
Accepts a compact disc for installing or
loading software, accessing data, and playing
music/video.
Supplies power to your computer when
external power is not connected.
Inside is the hard disk drive. P. 2-16
P. 3-3
P. 2-18
P. 3-6
Rear Components
NOTE: You may need to open the covers to be able to see the rear components.
Ref Component Description See Also
Power Connector
n
USB Port
o
Expansion Bus
p
Connector
VGA Connector
q
Serial Connector
r
Kensington Lock
s
Getting Started 1-9
Connects the AC adapter. P. 1-2
Connects a USB device, such as a USB flash
disk, printer, digital camera, joystick, and
more.
Connects to a Port Replicator. P. 4-16
Connects an external display monitor. P. 4-2
Connects a serial mouse or serial
communication device.
Locks the computer to a stationary object for
security.
P. 4-6
P. 4-4
P. 7-4
Front Components
Ref Component Description See Also
Top Cover Latch
n
Handle
o
Locks the top cover. P. 1-4
Provides a convenient way to carry the
computer anywhere.
Getting Started 1-10
Bottom Components
Ref Component Description See Also
Memory Slots
n
Getting Started 1-11
Inside are the memory slots for expanding
the memory size of your computer.
P. 4-17
Top-open Components
Ref Component Description See Also
LCD Screen
n
Displays the output of the computer. May
include the optional touchscreen feature.
P. 2-21
Getting Started 1-12
Ref Component Description See Also
Quick Buttons
o
Power Button
p
Touchscreen Pen
q
(Optional)
Touchpad
r
P1
Turns off/on the LCD display and LED
indicators, or
User customized program quick launch key.
NOTE: The function of P1 quick button depends on
your setting in BIOS Setup program under the
Advanced menu (see chapter 5 for details).
Enables/disables power saving when using
battery power.
Lights green when power saving mode is ON.
Enables/disables sunlight readable display.
Lights green when sunlight readable mode is
ON.
Enables/disables light sensor.
Lights green when light sensor is ON.
Turns the computer power ON and OFF. P. 1-4
Provides a convenient way to use the
touchscreen. Can be stretched for better grip
and handling.
Serves as the pointing device of the computer. P. 2-11
P. 2-21
P. 6-3
P. 2-4
P. 6-2
P. 2-21
P. 2-14
Indicators
s
Hard Disk Drive
/ Optical Drive
Card Reader
Caps Lock
Num Lock / HDD
Heater (option)
Getting Started 1-13
Show the current status of the computer’s
devices.
Blinks green when computer is reading /
writing data to the hard disk or optical drive.
Blinks green when computer is reading /
writing data to the storage card.
Lights green when Caps Lock is on. P. 2-6
Lights green when Num Lock is on. P. 2-28
Lights amber when optional hard disk heater is
on (temperature is lower than 5
booting your computer).
o
C when
P. 2-16
P. 4-14
Ref Component Description See Also
Microphone
t
Keyboard
u
Fingerprint
v
Sensor
Stereo Speaker
w
Indicators
Power
Battery Charge
WLAN
Receives sound and voice for the computer. P. 2-23
Serves as the data input device of the
computer.
Serves as the fingerprint verification,
preventing unauthorized access to your
computer.
Sends out sound and voice from the computer. P. 2-23
Show the current status of the computer’s
devices.
Lights green when computer is on.
Blinks green when computer is on Sleep mode.
Lights green when the battery is fully charged.
Lights amber when the battery is being
charged.
Blinks red when the battery’s capacity is
below 10 %.
Blinks amber when the battery is in an
abnormal condition.
Lights green when WLAN is on. P. 2-28
P. 2-6
P. 2-35
P. 1-4
P. 3-3
Bluetooth
Reserved for future option.
Getting Started 1-14
Lights green when Bluetooth is on. P. 2-30
Where to Go from Here
As your computer is ready for operation, you may want to do any of the
following now:
For this purpose... Do this...
To know more about the computer... Go on to the next chapter.
To install the operating system if your
dealer has not already done so...
To know more about the operating
system...
To set a power-on password... Read the operating system manual.
To charge the battery pack for the first
time...
See the operating system manual.
Read the operating system manual.
See “Charging the Battery Pack” in
Chapter 3.
Getting Started 1-15
Chapter 2
CHAPTER
Operating Your Computer
This chapter provides information about the use of the computer.
If you are new to computers, reading this chapter will help you learn the
operating basics. If you are already a computer user but are new to rugged
computers, you may choose to read only the parts containing information
unique to your computer.
Described in this chapter are the operating basics of these components /
features:
z Starting and stopping the computer
z Quick buttons
z Keyboard
z Touchpad
z Touchscreen (option)
z Hard disk drive
z DVD drive
z Video features
z Audio features
z Communication features
z Fingerprint sensor
Operating Your Computer 2-1
Starting and Stopping the Computer
There are a number of ways to start and stop the computer.
Starting the Computer
You always start the computer using the power button ( ).
A computer starts up with an operating system (OS) existing on the
storage device such as the hard disk. The computer will automatically
load the OS after you turn it on. This process is called booting.
NOTE: An operating system is the platform for all your software application programs to
run on. Your computer uses the Microsoft Windows Vista operating system.
Stopping the Computer
When you finish a working session, you can stop the computer by turning
off the power or leaving the computer in Sleep or Hibernation mode:
To stop in
this mode...
Off Click Start Æ Shut Down … This can
prevent loss of unsaved data or damage to
your software programs.
If the system is locked up because of
hardware or software problems, press the
power button to turn off the computer.
Sleep Depending on your settings in Windows,
you can place the computer in Sleep
mode by:
• Closing the display cover
• Pressing the Fn+F12 hot key
• Pressing the power button
Operating Your Computer 2-2
Do this... To start up or
resume again
Press the power
button.
Press the power
button.
To stop in
this mode...
Hibernation Depending on your settings in Windows,
you can place the computer in
Do this... To start up or
resume again
Press the power
button.
Hibernation mode by:
• Closing the display cover
• Pressing the power button
If you choose to stop in Sleep or Hibernation mode, you can return to
where you left off the next time you start up the computer. (See “Power
Management” in Chapter 3 for more information.)
Operating Your Computer 2-3
Using the Quick Buttons
Located on top of the keyboard are five quick buttons:
z LCD display and LED indicators quick button (P1) to turn off the
LCD display and LED indicator, or
User customized program quick launch key (P1) – see chapter 6 for
more details.
NOTE: The function of P1 quick button depends on your setting in BIOS Setup program
under the Advanced menu (see chapter 5 for details).
z
Power saving quick button (
) to enter into power saving mode
when using battery power. The system will turn down the panel
backlight and sacrifice processing speed to gain more battery life.
Lights green when power saving mode is enabled.
NOTE: The power saving quick button works only when using battery power.
z
Sunlight readable quick button ( ) for enabling the sunlight
readable LCD display.
Lights green when sunlight readable mode is enabled.
Operating Your Computer 2-4
z Light sensor quick button ( ) for adjusting the LCD brightness
automatically based on your computer’s surrounding lighting
condition.
Lights green when light sensor is enabled.
Operating Your Computer 2-5
Using the Internal Keyboard
Your keyboard has all the standard functions of a full-sized computer
keyboard plus a
The standard functions of the keyboard can be further divided into four
major categories:
z Typewriter keys
z Cursor-control keys
z Numeric keys
z Function keys
Typewriter Keys
Typewriter keys are similar to the keys on a typewriter. Several keys are
added such as the
the lock keys (
corresponding indicators light up.
Fn key added for specific functions.
Ctrl, Alt, Esc, and lock keys for special purposes. When
Caps Lock, Num Lk, and Scr Lk) are pressed, their
The Control (
with other keys for program-specific functions. The Escape (
Ctrl) / Alternate (Alt) key is normally used in combination
Esc) key is
usually used for stopping a process. Examples are exiting a program and
canceling a command. The function depends on the program you are
using.
Operating Your Computer 2-6
Loading...