GE Security VT4010-50 Specsheet
GE
VT/VR4000 Series
Security
Overview
The IFS VT/VR4000 Video Transmitter and Receiver series
utilizes frequency modulation for transmission quality that
meets some of the requirements for EIA RS-250C MediumHaul Video Transmission. These environmentally hardened
units provide transmission of NTSC, PAL, or SECAM video
over one multimode or single mode fiber optic cable and
are ideal for use in unconditioned out-of-plant or roadside
installations. Plug-and-play design ensures ease of
installation and no electrical or optical adjustments are
ever required. LED indicators are provided for rapidly
ascertaining equipment operating status, and this
equipment is available in either stand-alone or rack
mount configurations.
Application Examples
• CCTV (Fixed Video)
IFS FM Video Transmitter
and Receiver
Standard Features
• Frequency Modulation for High Quality Video
Transmission
• Meets Some Requirements for RS-250C
Medium-Haul Transmission
• Directly Compatible with All NTSC, PAL, or SECAM
CCTV Camera Systems
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters
FM Video
Transmitter
and Receiver
Utilizes frequency modulation
for EIA RS-250C medium-haul
video transmission.
• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection
• Wide Optical Dynamic Range: Optical Attenuators are
Never Required
• Optical Loss Relay Output
• Comprehensive Lifetime Warranty
Agency compliance
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
GE
Security
Specifications
Video
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 10 Hz - 10 MHz
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Differential Gain: <2%
Differential Phase: <1.3°
Tilt: <1%
Signal-to-Noise Ratio (SNR): <60 Minimum @ Max. Optical Loss Budget
Wavelength 850 or 1310 nm, Multimode; 1310 or 1550 nm, Single Mode
Receiver Sensitivity .5 μw (-33 dBm)
Number Of Fibers 1
Led Indicators VT: Video Sync Presence, Operating Power
VR: Optical carrier Detect, Operating Power
Relays*** 24 VAC/DC @ 100 mA
Connectors
Optical: ST, SC or FC (SM only)
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
ElectricaL & Mechanical
Power:
Surface Mount: VTVR: 24 VAC C.T. @ 300 mA, VT: 12 VDC @ 200 mA (optional)
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.4 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
Ordering Information
Part Number Optical Pwr. Budget Max. Distance*Description Fibers Required
VT4010
Multimode
62.5/125μm**
VR4010
VT4020
VR4030
VT4025
VR4030
VT4030
Single Mode
9/125μm
VR4030
VT4055
VR4050
VT4050
VR4050
Accessories♦
Options
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-SC’ to model number for SC Optical Connector (For Single Mode equipment only)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-FC’ to model number for FC Optical Connector (For Single Mode equipment only)
FM Video Transmitter (850 nm)
FM Video Receiver (850 nm)
FM Video Transmitter (1310 nm)
FM Video Receiver (1310 nm)
FM Video Transmitter (1310 nm), LED
FM Video Receiver (1310 nm)
FM Video Transmitter (1310 nm), LASER
FM Video Receiver (1310 nm)
FM Video Transmitter (1550 nm), LED
FM Video Receiver (1550 nm)
FM Video Transmitter (1550 nm), LASER
FM Video Receiver (1550 nm)
1
1
1
1
1
1
♦
Tx Output
20 μw (-17 dBm)
20 μw (-17 dBm)
250 μw (-6 dBm)
25 μw (-16 dBm)
250 μw (-6 dBm)
250 μw (-6 dBm)
25 μw (-16 dBm)
200 μw (-7 dBm)
200 μw (-7 dBm)
200 μw (-7 dBm)
All accessories are third party manufactured.
16 dB
16 dB
17 dB
27 dB
27 dB
27 dB
17 dB
26 dB
26 dB
26 dB
2.8 miles (4.5 km)
10 miles (16 km)
31 miles (51 km)
50 miles (81 km)
65 miles (104 km)
42 miles (68 km)
System Design
VT4010
Video
(Coax)
ifs
203.426.1180
International
Fiber
Systems
Incorporated
up to 2.8 miles
(4.5 km)
1 Fiber
62.5/125μm MM
Optical Loss
Relay
VR4010
ifs
203.426.1180
International
Video
Fiber
Systems
Incorporated
(Coax)
Loading...