GE Security VT1930WDM-PELCO, VT1920WDM-PELCO Specsheet

®

VT1930WDM-Pelco

43 miles (69 km)

VR1930WDM

23 dB

VT1920WDM-Pelco

6.2 miles (10 km)

VR1920WDM

15 dB

VR1930WDM

Video

(Coax)

Control

Data

1 Fiber

9/125µm SM

VT1930WDM-Pelco

Pelco

SPECTRA III or IV

DOME

up to 43 miles

(69 km)

ifs

Contact
Closure

Tamper Switch

•

1310/1550 nm, Singlemode

ELECTRICAL & MECHANICAL

Power:
VT1930WDM-Pelco: 12VDC @ 90mA
VR1930WDM: 12VDC
Circuit Board: Meets IPC Standard
Shipping Weight: < 1/2 lb./.23 kg

ENVIRONMENTAL

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.

• At 6 dB attenuation

TECHNICAL SPECIFICATION

VIDEO WITH PTZ DATA

VT1900WDM-PELCO SERIES

TRANSMITTER

RECEIVER

OPTICAL

PWR BUDGET

MAX.

DISTANCE* MODEL

MODEL

AGENCY COMPLIANCE

MADE IN THE USA

Federal Supply Schedule

Contract No. GS-07F-0049M

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J

IFS

Line / Fiber Transmission

VT1900WDM­Pelco Series

IFS Video with PTZ Data

OVERVIEW

The IFS VT1900WDM-Pelco Series video transmitter and data
transceiver module is designed for use in the Spectra III or Spectra
IV camera system. This module allows the dome camera to be
connected directly to optical fiber, providing a fully integrated
solution. This unit mounts directly into the dome’s enclosure,
replacing the traditional power,data and coaxial cable connection.
The IFS VT1900WDM-Pelco series allows for the simultaneous
transmission of Video and PTZ Data over one multimode or
singlemode optical fiber. Now, an added feature built into the
VT1900WDM-Pelco Series is a
additional device such as a dome tamper switch, low pressure
indicator or an event alarm, to be added and its signal transmitted
back to the monitoring location.

The optical output of the dome is compatible with the standard IFS
VR1

900WDM Series receiver, and is designed for quick and easy
installation into the Spectra III or Spectra IV system utilizing one
singlemode optical fiber. In a
transmitter is designed to be an integral part of the Spectra III or
Spectra IV system, there are no external electrical connections or
additional hardware at the camera site.

logic signal input allowing an

ddition, the VT1900WDM-Pelco Series

STANDARD FEATURES

• FM Video Transmission

• NTSC, PAL Compatible

• Supports RS-422 Data Interface

• Transparent to Data Encoding

• Full Range Automatic Gain Control (AGC)

• No External Power Supply Required

• No In-field Electrical or Optical Adjustments Required

• Integrated WDM for Greater Product Reliability

• Distances up to 43 miles (69 km) without Repeaters

• Available in FiberPak™

• Comprehensive Lifetime Warranty

SYSTEM DESIGN

interlogix.com

Specifications

Data

Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚

Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM

D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM

Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2

D1030: 2 D1030WDMA: 1 D1030WDMB: 1

Connectors

Optical: ST
Data and Power: Terminal Block with Screw Clamps

Electrical & Mechanical

Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.

GE

Security

North America
T 888-GE-SECURITY

888-437-3287
F 503-691-7566
E [e-mail]

Asia
T 852-2907-8108
F 852-2142-5063

Australia and New Zealand
T 613-9239-1200
F 613-9239-1299

Europe
T 44-113-238-1668
F 44-113-253-8121

Latin America
T 305-593-4301
F 305-593-4300

gesecurity.com/ifs

Specifications subject to
change without notice

© 2008 General Electric Company
All Rights Reserved

VT1900WDM-Pelco Series

IFS Video with PTZ Data

Ordering Information

Multimode 62.5/125µm** 6.2 mile (10 km)

Singlemode 9/125µm 43 miles (69 km)

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

Specifications

Video

Video Input: 1 Volt pk-pk (75 ohms)

Bandwidth: 5 Hz - 10 MHz (At 6 dB attenuation)

Differential Gain: <5%

Differential Phase: <5 °

Tilt: <1%

Signal-to-Noise Ratio (SNR): >55 dB @ 10 dB attn

Data

Data Interface: RS-422

Wavelength

Number Of Fibers

VT1930WDM-Pelco: 1

VT1930WDM: 1

Connectors

Optical: ST

Electrical & Mechanical

Power:

VT1930WDM-Pelco: 12VDC @ 90mA

VT1930WDM: 12VDC @ 100mA

Circuit Board: Meets IPC Standard

Shipping Weight: < 1/2 lbs./.23 kg

Environmental

MTBF: > 100,000 hours

Operating Temp: -40° C to +74° C

Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non-condensing)

North America

T 855-286-8889

Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*

VT1920WDM-PELCO Video

VR1920WDM Video Receiver/Data Transmitter (1550/1310 nm laser) 1 15 dB

VT1930WDM-PELCO Video Transmitter/Data Receiver (1310/1550 nm laser) 1 23 dB

VR1930WDM Video Receiver/Data Transmitter (1550/1310 nm laser) 1 23 dB

1310/1550 nm, Multimode

1310/1550 nm, Singlemode

Transmitter/Data Receiver (1310/1550 nm laser) 1 15 dB

Latin America

T 561-998-6114

6.2 mile (10 km)

43 miles (69 km)

Interlogix is part of UTC Building & Industrial Systems,

Code of Federal Regulations, Subchapter J

Specifications subject to change without notice.

© 2014 United Technologies Corporation

a unit of United Technologies Corporation.

Agency Compliance

Complies with FDA Performance

Standard for Laser Products, Title 21,

interlogix.com

All rights reserved.

VT1900WDM_Pelco Series