GE Security VT1920WDM-C Specsheet

International Fiber Systems, Incorporated DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326
sales@ifs.com
Europe, Middle East, Africa TEL +44(0) 1732 522 777
Asia Pacific TEL +65 6235 2661
Australia TEL +61 2 9836 0600
Latin America TEL (512) 477-8787
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Supports RS-232, RS-422, RS-485 (Tri-State 2 or 4-Wire)
• Transparent to Data Encoding/Compatible with Major CCTV Camera Manufactures
• Power and Carrier Detect Status Indicating LED’s to Monitor System Performance
• Integrated WDM for Greater Product Reliability
• No In-field Electrical or Optical Adjustments Required
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses
• Distances up to 43 Miles (69 km) Without Repeaters
• Lifetime Warranty
• Available in FiberPak
TM
PRODUCT SPECIFICATION
FM VIDEO WITH BI-DIRECTIONAL DATA
VT/VR1900 SERIES
FEATURES
• CCTV with Bi-Directional PTZ Camera Control
• CCTV with Access Control Communication
• CCTV with Remote Signalization
• CCTV with Remote Keyboard Control
APPLICATION EXAMPLES
DESCRIPTION
The IFS VT/VR1900 Series video transmitter/receiver and data transceiver supports the simultaneous transmission of frequency modulation (FM) video and bi-directional data over one or two optical fibers. The modules are universally compatible with major CCTV camera manufactures and support RS-232, RS-422, RS-485 (Tri-State 2 or 4-wire). Modules within the series are available for use with mul­timode or single-mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The modules incorporate power, and carrier detect status indicating LED’s to monitor proper system operation. The modules are available in either stand-alone or rack mount versions.
V
D
ORDERING INFORMATION
PAR T NUMBER
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
SINGLE-MODE
9/125µm
MULTIMODE
62.5/125µm**
2
1
1
1
2 miles (3.3 km)
2.5 miles (4 km)
6.2 miles (10 km)
43 miles (69 km)
OPTIONS
PS-12VDC 12 Volt DC Plug-in Power Supply (Included) PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order) Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
VT1910 VR1910
VT1910WDM VR1910WDM
VT1920WDM VR1920WDM
VT1930WDM VR1930WDM
FIBERS
REQUIRED
13 dB
14 dB
15 dB
23 dB
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
DESCRIPTION
Video Transmitter/Data Transceiver (850 nm)
Video Receiver/Data Transceiver (850 nm)
Video Transmitter/Data Transceiver (1310/850 nm)
Video Receiver/Data Transceiver (850/1310 nm)
Video Transmitter/Data Transceiver (1310/1550 nm, Laser)
Video Receiver/Data Transceiver (1550/1310 nm, Laser)
Video Transmitter/Data Transceiver (1310/1550 nm, Laser)
Video Receiver/Data Transceiver (1550/1310 nm, Laser)
.comwww.
Available at:
Available at:
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
2.0 miles (3.3 km)
2.5 miles (4 km)
6.2 miles (10 km)
43 miles (69 km)
VT1910
VT1910WDM
VT1920WDM
VT1930WDM
850 nm
1310/850 nm
1310/1550 nm
1310/1550 nm
VR1910
VR1910WDM
VR1920WDM
VR1930WDM
13 dB
14 dB
15 dB
23 dB
SYSTEM DESIGN
VIDEO
Video Input: 1 volt pk-pk (75 ohms) Bandwidth: 5 Hz - 8.0 MHz Differential Gain: <5% Differential Phase: <5° Tilt: <1% Signal-to-Noise Ratio (SNR): > 55 dB @ 10 dB ATTN.
DATA
Data Interface: RS- 232, RS-422, RS-485
(Tri-State 2 or 4-wire) Data Format: Manchester, Bi-phase Data Rate: DC-50 Kbps (NRZ) Operating Mode: Simplex or Full Duplex
WAVELENGTH
VT/VR1910: 850 nm, Multimode VT/VR1910WDM: 1310/850 nm, Multimode VT/VR1920WDM: 1310/1550 nm, Multimode VT/VR1930WDM 1310/1550 nm, Single-mode
NUMBER OF FIBERS
VT/VR1910: 2 VT/VR1910WDM: 1 VT/VR1920WDM: 1 VT/VR1930WDM: 1
CONNECTORS
Optical: ST Power and Data: Terminal Block with Screw Clamps Video: BNC (Gold Plated Center-Pin)
ELECTRICAL & MECHANICAL
Power: Surface Mount: 12 VDC @ 300 mA Number of Rack Slots: 1 Current Protection: Automatic Resettable Solid-State Current
Limiters Max. RG59 Cable Length: 750 ft. Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm Shipping Weight: < 2 lbs./0.9 kg
ENVIRONMENTAL
MTBF: > 100,000 hours Operating Temp: -40° C to +74° C Storage Temp: -40° C to +85° C Relative Humidity: 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
SPECIFICATIONS
TEL (203)426-1180 FAX (203)426-3326 www.ifs.com sales@ifs.com
16 Commerce Road
Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
TECHNICAL SPECIFICATION
FM VIDEO WITH BI-DIRECTIONAL DATA
VT/VR1900 SERIES
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
TRANSMITTER
RECEIVER
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
MODEL
MODEL
Multimode
62.5/125µm
**
Single-mode
9/125µm
07/14/03
International
Fiber
Systems
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
203.426.1180
AGENCY COMPLIANCE
MADE IN THE USA
Federal Supply Schedule
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Video
(Coax)
Control
Data
VT1910
International
Fiber
Systems
ifs
Incorporated
203.426.1180
up to 2.0 miles
62.5/125µm MM
(3.3 km)
2 Fibers
VR1910
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Video
(Coax)
Control
Data
Loading...