GE
VT1500WDM-Ultrak
Security
The IFS VT1500WDM-Ultrak is a miniature video transmitter
and data receiver using one multimode fiber optic cable.
It plugs directly into the Ultrak KD6
The VT1500WDM-Ultrak has identical performance as the
standard VT1500WDM and is compatible with the standard
VR1500WDM (R3). Designed for easy and fast installation
the VT1500WDM-Ultrak has no external electrical connections and requires no external power.
™
dome housing.
IFS Video with One-Way Data
Standard FeaturesOverview
• AM Video Transmission
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Supports Ultrak KD6
• Transparent to Data Encoding
• Full Range Automatic Gain Control (AGC)
• No In-field Electrical or Optical Adjustments Required
• Integrated WDM for Greater Product Reliability
• Distances up to 2.5 miles (4 km) without Repeaters
• Comprehensive Lifetime Warranty
™
Dome
Video with
One-Way Data
Designed for use in the
Ultrak KD6
™
dome housing.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Specifications
Video
Video Output: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz (At 6 dB attenuation)
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >55 dB @ 10 dB attn.
Data
Data Interface: RS-232, RS-422
Wavelength 850/1310 nm, Multimode
Number Of Fibers VT1500WDM-Ultrak: 1
Connectors
Optical: ST
Electrical & Mechanical
Power:
VT1500WDM-Ultrak: 24 VAC
Circuit Board: Meets IPC Standard
Size (in./cm) (LxWxH): 2.375 x 2.25 x .875 in., 8.6 x 5.715 x 2.2 cm
Shipping Weight: < 1/2 lb./.23 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
Agency compliance
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
System Design
VT1500WDM-Ultrak
KD6
DOME
VTVR1500WDMU-Draw.eps
up to 2.5 miles
Where it this?
62.5/125µm MM
Ordering Information
Part Number
Multimode
62.5/125μm**
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget .
VT1500WDM-Ultrak
VR1500WDM
Description
Video Transmitter/Data Receiver (850/1310 nm)
Video Receiver/Data Transmitter (1310/850 nm)
Fibers Required
1 2.5 miles (4 km)
(4 km)
1 Fiber
VR1500WDM
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Optical Pwr. Budget
14 dB
Video
(Coax)
Control
Data
Max. Distance*
Loading...