GE Security VT14130-SC-R3, VT14130-SC Specsheet

• State-of-the-Art 10-Bit Digitally Encoded Video Transmission

• Exceeds All Requirements for RS-250C Short-Haul
Transmission: True Broadcast Video Performance

• Exceptionally Low Video Distortion with Zero
Performance Variation vs. Optical Path Loss

• Ideally Suited to Networks Requiring Multiple
Physical Layers Where Video Degradation May Be a Problem

• Directly Compatible with All NTSC, PAL, or SECAM CCTV
Camera Systems

• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters

• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection

• Wide Optical Dynamic Range: Optical Attenuators are
Never Required

• Exceeds NEMA TS-1/TS-2 and Caltrans Traffic Signal
Control Equipment Environmental Specifications for
Operating Temperature, Shock, Vibration, Humidity,
and Voltage Transient Protection

• Robust Design Ensures Extremely High Reliability
In Unconditioned Roadside
Environments

• Lifetime Warranty

PRODUCT SPECIFICATION

10 BIT DIGITALLY ENCODED VIDEO TRANSMITTER AND RECEIVER

VT/VR14100 SERIES

FEATURES

APPLICATION EXAMPLES

DESCRIPTION

International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or [phone]

FAX [phone]

■ [e-mail]

Europe, Middle East, Africa TEL [phone]

■ Asia Pacific TEL [phone]

Australia TEL [phone]

■ Latin America TEL [phone]

The IFS VT/VR14100 series video transmitter and video receiver
units utilize state-of-the-art 10-bit digital encoding and decoding for
true broadcast-quality video transmission that exceeds the
requirements of EIA RS-250C for Short-Haul Video Transmission.
These environmentally hardened units provide transmission of video
over one single-mode or multimode fiber optic cable and are ideal for
use in unconditioned road side or out-of-plant installations. As the
level of video performance is so high, the VT/VR14100-series is ide­ally suited to networks employing multiple physical layers where
video degradation may be problem, such as FDM or digitally encoded
video multiplexing links, T-1 or fractional T-1 codecs, and SONET or
ATM backbones. These units are completely transparent to and uni­versally compatible with any NTSC, PAL, or SECAM CCTV camera
system. Plug-and-play design ensures ease of installation and no
electrical or optical adjustments are ever required. LED indicators are
provided for rapidly ascertaining equipment operating status, and
this equipment is available in either stand-alone or rack mount
configurations.

V

ORDERING INFORMATION

PAR T
NUMBER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

SINGLE-MODE

9/125µm

MULTIMODE

62.5/125µm**

1

1

1

2 miles (3 km)

43 miles (69 km)

67miles (108 km)

OPTIONS

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-SC’ to Model Number for SC Optical Connector (For Single-mode Equipment Only)
Add -‘FC’ to Model Number for FC Optical Connector (Single-mode equipment only)
Add ‘-HP’ to VT Model Number for 26 dB Single-mode Optical Power Budget
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

VT14120
VR14120

VT14130
VR14130

VT14150
VR14150

FIBERS

REQUIRED

10 dB

23 dB

27 dB

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

Distance can also be limited by fiber bandwidth. ** For 50/125 fiber, subtract 4 dB from Optical Power Budget.

DESCRIPTION

Video Transmitter/Stand-alone module (1310 nm)

Video Receiver/Stand-alone module (1310 nm)

Video Transmitter/Stand-alone module (1310 nm)

Video Receiver/Stand-alone module (1310 nm)

Video Transmitter/Stand-alone module (1550 nm)

Video Receiver/Stand-alone module (1550 nm)

• High Performance CCTV (Fixed Video)

.comwww.

Available at:

Available at:

• A & E Specifications, (CSI)

• AutoCAD Drawings

• Operation Manuals

• Technical Bulletins

MAX.

DISTANCE*

VIDEO

Video Input: 1 volt pk-pk (75 ohms)
Video Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >67 dB @ Maximum Optical Loss Budget

WAVELENGTH 1310 nm, Multimode

1550 nm, Single-mode

OPTICAL EMITTER Laser Diode (all models)

NUMBER OF FIBERS 1

LED INDICATORS

VT Transmitter Unit:

• Video Input Sync Presence

• Video Input Overload

• Operating Power

VR Receiver Unit:

• Video Output Sync Presence

• Video Output Overload

• Optical Carrier Detect/ Link-Lock

• Operating Power

CONNECTORS

Power: Terminal block with screw clamps
Video: BNC (Gold Plated Center-Pin)
Optical: ST , SC or FC (see ordering information)

ELECTRICAL & MECHANICAL

Power:
Surface Mount: +12 VDC @500 mA
Rack: From Rack
Number of Rack Slots: 2

Current Protection: Automatic Resettable Solid-State Current

Limiters

Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./ 0.9 kg

ENVIRONMENTAL

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.

SPECIFICATIONS

TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]

16 Commerce Road

■ Newtown, CT 06470

Due to our continued effort to advance technology, product specifications are subject to change without notice.

TECHNICAL SPECIFICATION

10 BIT DIGITALLY ENCODED VIDEO TRANSMITTER AND RECEIVER

VT/VR14100 SERIES

10 dB

23 dB

27 dB

VT14120

VT14130

VT14150

VR14120

VR14130

VR14150

SYSTEM DESIGN

OPTICAL POWER BUDGET

FIBER

WAVELENGTH

TRANSMITTER

RECEIVER

OPTICAL

PWR BUDGET

MODEL

MODEL

Multimode

62.5/125µm

**

Single-mode

9/125µm

1310 nm

1550 nm

2 miles (3 km)

43 miles (69 km)

67 miles (108 km)

1 Fiber

9/125µm SM

07/24/03

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

AGENCY COMPLIANCE

MADE IN THE USA

Federal Supply Schedule

Contract No. GS-07F-0049M

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J