GE Security VT1001-C Specsheet

GE

VT1001 Series

Security

Overview

The IFS VT1001 series dual video transmitter provides
transmission of two independent fixed video signals in
one module utilizing AM modulation on two independent
multimode fiber optic cables. The module is not a
multiplexer. The module is ideal for smaller CCTV
installations and the rack-mount version can be used to
double the fixed video capacity of the R3 rack for up to 28
independent video channels per card cage. The VT1001
is compatible with the IFS VR1000, VR1001, VR1100, and
VR2100 series receivers. Plug-and- play design ensures
ease of installation requiring no electrical or optical
adjustments. The module incorporates a power and
channel A and B sync detect status indicating LED’s for
monitoring proper system operation. The module is
available in either stand-alone or rack mount version.

Application Examples

• CCTV (Fixed Video)

IFS Dual Independent AM

Video Transmitter

Standard Features

• AM Video Transmission

• NTSC, PAL, SECAM Compatible

• Full Color Compatibility

• Two Independent Transmitters in One Module

• Can be Used to Double the Fixed Video Capacity of an R3
Card Cage

• No In-field Electrical or Optical Adjustments Required

• Power and Sync Detect Status Indicating LED’s to Monitor
System Performance

• Distances up to 2.5 miles (4 km) without Repeaters

• Automatic Resettable Fuses on all Power Lines

• Hot-Swappable Rack Modules

• Comprehensive Lifetime Warranty

Dual Independent
AM Video Transmitter

Provides transmission of two
independent fixed video signals in
one module utilizing AM modulation.

VT1001

Video

(Coax)

Video

(Coax)

Video

(Coax)

Video

(Coax)

2 Fibers

62.5/125µm MM

VR1001

up to 2.5 miles

(4 km)

ifs

International

Fiber

Systems

Incorporated

203.426.1180

ifs

International

Fiber

Systems

Incorporated

203.426.1180

Specifications

Video

Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB typical, 54 dB minimum

Wavelength 850 nm, Multimode

Receiver Sensitivity 1 µw (-30 dBm)

Number Of Fibers 2

Connectors

Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)

ElectricaL & Mechanical

Power: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

Part Number

Multimode

62.5/125µm**

Accessories♦

Options

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

♦

All accessories are third party manufactured.

VT1001

Dual Video Transmitter (850 nm)

2

VT1001 Series is compatible with:
VR1000, VR1001, VR1100 and VR2100
Series Receivers

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

Optical Pwr. Budget Max. Distance*Fibers RequiredDescription

14 dB

2.5 miles (4 km)