GE Security VT7220-2DRDT, VT7220-2DRDT-R3, VT7230-2DRDT, VT7230-2DRDT-R3, VR7220-2DRDT Installation & Operation Instructions
...Page 1
VT7220-2DRDT
VT7220-2DRDT-R3
VT7230-2DRDT
VT7230-2DRDT-R3
VR7220-2DRDT
VR7220-2DRDT-R3
VR7230-2DRDT
VR7230-2DRDT-R3
Installation/Operation Instructions
Warranty Information
www.ifs.com
888-999-9IFS
GE Security
Page 2
VT/VR7200-2DRDT
RS232 DATA
RS422 DATA
2-WIRE
RS485 DATA
ON
ON
ON
OFF
OFF
ON
21
ON
OFF
21
OFF
21
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Ground
Data Input
Data Output
Ground
- Data In
+ Data In
- Data Out
+ Data Out
- Data In/Out
+ Data In/Out
4-WIRE
RS485 DATA
ON
ON
21
ON
8
7
6
5
4
3
2
1
- Data In
+ Data In
- Data Out
+ Data Out
Page 3
2 BNC Cables
(Fixed Video Inputs from Cameras)
VIDEO
INPUT
1
2
POWER
VT7230-2DRDT
2 CHANNEL DIGITAL
VIDEO TRANSMITTER
DATA TRANSCEIVER
+
2 CHANNEL
ifs
203.426.1180
WWW.ifs.COM
232
OFF
sw
1
1
2
OFF
ON
2
International
Fiber
Systems
Incorporated
2w
422
485
ON
OFF
OFF OFF
4w
485
ON
ON
RS422/
2W RS485
RS232
RS422/
4W RS485
RS422/
2W RS485
RS232
RS422/
4W RS485
- DATA (IN/OUT) - 7
+ DATA (IN/OUT) - 6
RS232 DATA IN - 5
RS232 DATA OUT - 4
- DATA OUT - 3
+ DATA OUT - 2
- DATA (IN/OUT) - 7
+ DATA (IN/OUT) - 6
RS232 DATA IN - 5
RS232 DATA OUT - 4
- DATA OUT - 3
+ DATA OUT - 2
- 1
- 1
- 8
- 8
OPTICAL
IN/OUT
VR7230-2DRDT
2 CHANNEL DIGITAL
VIDEO RECEIVER
+
2 CHANNEL
DATA TRANSCEIVER
ifs
203.426.1180
WWW.ifs.COM
OFF
sw
1
1
2
2
232
OFF
ON
International
Fiber
Systems
Incorporated
2w
422
485
ON
OFF
OFF OFF
4w
485
ON
ON
POWER
+12 VDC - 1
Simplex single mode
fiber optic cable
2 BNC Cables
(Video Output to Monitors)
RS422/
2W RS485
RS232
RS422/
4W RS485
RS422/
2W RS485
RS232
RS422/
4W RS485
- DATA (IN/OUT) - 7
+ DATA (IN/OUT) - 6
RS232 DATA IN - 5
RS232 DATA OUT - 4
- DATA OUT - 3
+ DATA OUT - 2
- DATA (IN/OUT) - 7
+ DATA (IN/OUT) - 6
RS232 DATA IN - 5
RS232 DATA OUT - 4
- DATA OUT - 3
+ DATA OUT - 2
POWER
- 8
- 1
- 8
OPTICAL
- 1
IN/OUT
+12 VDC - 1
- 2
- 2
Black wire
Black with
white stripe
Page 4
A
NOTE: WITHOUT PROPER FIBER CONNECTION, LED's DO NOT INDICATE
CORRECT OPERATIONAL STATUS OF THE UNIT.
VT7200-2DRDT
B
F
C
G
D
H
E
B
1 2
OFF
1 2
A
TX RX
TX RX
J
K
CARRIER DETECT
CHAN 1 CHAN 2
POWER
M
L
N
CAMERA ON
I
Carrier Detect
A
Channel A Data: Switch 1
B
C
Channel A Data: Switch 2
Electrical Data Transmitted Channel A
D
Optical Data Received Channel A
E
Video Input From Camera: Channel 1
F
Camera 1 "ON"
G
Video Input From Camera: Channel 2
H
Camera 2 "ON"
I
Channel B Data: Switch 2
J
Channel B Data: Switch 1
K
Optical Data Received Channel B
L
LED: RED to GREEN
LED: RED to GREEN
LED: RED to GREEN
LED: Illuminates
LED: Illuminates
LED: RED to GREEN
Electrical Data Transmitted Channel B
M
Power
N
LED: RED to GREEN
LED: Illuminates
Page 5
VR7200-2DRDT
NOTE: WITHOUT PROPER FIBER CONNECTION, LED's DO NOT INDICATE
CORRECT OPERATIONAL STATUS OF THE UNIT.
G
A
E
H
B
F
C
D
A
1 2
TX RX
CHAN 1 2
TX RX
TRANSMIT
CARRIER
REMOTE\
VIDEO ON
LOCAL
VIDEO ON
B
1 2
OFF
POWER
RECEIVER
LOCKED
L
K
M
I
J
N
A
B
C
D
E
F
G
H
I
J
K
L
M
N
Channel A Data: Switch 1
Channel A Data: Switch 2
Electrical Data Transmitted Channel A
Optical Data Received Channel A
Video Present at Receiver: Channel 2
Video Present at Transmitter: Channel 2
Video Present at Transmitter: Channel 1
Video Present at Receiver: Channel 1
Channel B Data: Switch 2
Channel B Data: Switch 1
Optical Data Received Channel B
Electrical Data Transmitted Channel B
Power
Receiver Locked
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
LED: Illuminates
Page 6
INSTALLATION INSTRUCTIONS FOR ADDITIONAL COMPONENTS
REQUIREDTO MEET EMISSION REQUIREMENTS ON THE
VR72XX-2DRDT SERIES STAND ALONE UNIT.
Install Supplied EMI Filters (IFS P/N FL28A0640-0A0 or Steward P/N
28A06040-0A0 on each data cable as shown.
The data cables must have two turns through the clamp!
Page 7
INSTALLATION INSTRUCTIONS FOR ADDITIONAL COMPONENTS REQUIRED
TO MEET EMISSION REQUIREMENTS ON THE VT72XX-2DRDT-R3 and
VR72XX-2DRDT-R3 Series RACK MOUNT UNITS.
INSTALL SUPPLIED CONDUCTIVE FOAM GASKET
(IFS P/N MMRFGSKT 375X500 or CHOMERICS P/N 82-122-74021-09600)
CUT TO 3 INCH LENGTH AND PLACE ON TOP RAIL OF THE RACK
(AS SHOWN), WHERE THE UNIT IS TO BE INSTALLED.
GASKET
Page 8
Comprehensive
Lifetime Warranty
(a) Seller warrants to the original End User that products and any
services furnished hereunder will be free from defects in material
and workmanship as of the date of delivery, and will conform to
Seller’s published technical specifications. The foregoing shall
apply only to failures to meet said warranties which appear within
that period of time during which the Products are installed in their
original installation for the original End User and operator of such
Products; provided, however, that in the event of product discontinuance, warranty support is limited to five (5) years from the
announcement of discontinuance. Notwithstanding the preceding
sentence, the duration of the warranty period for
products not
manufactured by Seller (e.g., fiber optic cabling, test equipment,
power supplies or batteries) shall be the warranty period offered by
the original manufacturer, if any.
(b) The conditions of any tests shall be mutually agreed upon and
Seller shall be notified of, and may be represented at, all tests that
may be made. The warranties and remedies set forth herein are
conditioned upon (a) proper storage, installation, use and maintenance, and conformance with any applicable recommendations of
Seller and (b) Buyer promptly notifying Seller of any defects and,
if required, promptly making the product available for correction.
(c) If any product or service fails to meet the foregoing warranties,
Seller shall thereupon correct any such failure either at its option,
(i) by repairing any defective or damaged product or parts of the
products, or (ii) by making available any necessary repaired or
replacement products or parts thereof. Any repaired or replacement
part or product shall be warranted for the remaining period of the
original Warranty Period. Seller shall pay, or credit Buyer for, the
cost of freight for all return shipments of products or parts to
Buyer. Where a failure cannot be corrected by Seller's reasonable
efforts, the parties will negotiate an equitable adjustment in price.
(d) The preceding paragraph sets forth the exclusive remedies for
claims based on defect in or failure of products or services,
whether the claim is in contract, indemnity, warranty, tort
(including Seller's negligence), strict liability or otherwise and
however instituted. Upon the expiration of the warranty period,
all such liability shall terminate and BUYER shall have a reasonable time, within thirty days after the warranty period, to give
written notice of any defects which appeared during the warranty
period. The foregoing warranties are exclusive and in lieu of all
other warranties, whether written, oral, implied or statutory.
NO IMPLIED OR STATUTORY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE SHALL APPLY. Seller does not warrant any
products or services of others which BUYER has designated.
DESIGN CENTER (888) 999-9IFS or (203) 426-1180
Fax: (203) 426-3326 • sales@ifs.com
Europe, Middle East, Africa Tel: +44 (0) 1732 522 777 •
Asia Pacific Tel: +65 6235 2661 • Latin America (512) 477-8787
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesirable operation.
Changes or modifications not expressly approved by International Fiber Systems, Inc. could void
the user’s authority to operate the equipment.
CLASS 1 LASER PRODUCT
(For purposes of IEC 60825-1)
Complies with FDA Performance Standard for Laser Products
Title 21
Code of Federal Regulations
Subchapter J
Loading...