GE Security VR71630-SC-R3 Specsheet

International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or [phone]

FAX [phone]

■ [e-mail]

Europe, Middle East, Africa TEL [phone]

■ Asia Pacific TEL [phone] ■ Latin America TEL [phone]

• 8-Bit Digitally-Encoded Video Transmission Transmits 16
Real-Time Color Video Signals on One Optical Fiber

• Exceeds All Requirements for RS-250C Medium-Haul
Transmission: Extremely High Video Performance

• Exceptionally Low Video Distortion with Zero Performance
Variation vs. Optical Path Loss

• Ideally Suited to Networks Requiring Multiple Physical Layers
Where Video Degradation May be a Problem

• Directly Compatible with All NTSC, PAL, or SECAM
CCTV Camera Systems

• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.

• Wide Optical Dynamic Range: Optical Attenuators
Are Never Required

• Robust Design Ensures Extremely High Reliability in
Unconditioned Out-of-Plant Environments

• LED Status Indicators Provide Rapid
Indication of Critical Operating Parameters

• Solid-State Current Limiters on All
Power Lines Provide
Unconditional Equipment Protection

• Comprehensive Lifetime
Warranty

PRODUCT SPECIFICATION

16-CHANNEL DIGITAL VIDEO MULTIPLEXER

VT/VR71600-R3 SERIES

FEATURES

DESCRIPTION

The IFS VT/VR71600-R3 Video Transmitter/Multiplexer and Video
Receiver/Demultiplexer series utilizes state-of-the-art 8-bit digital
encoding and decoding for high-quality video transmission that
exceeds the requirements of EIA RS-250C for Medium-Haul Video
Transmission. These environmentally hardened units provide trans­mission of sixteen independent video channels over one multimode or
singlemode optical fiber and are ideal for use in unconditioned road­side or out-of-plant installations. These units are completely transpar­ent to and universally compatible with any NTSC, PAL, or SECAM
CCTV camera system. Plug-and-play design ensures ease of installa­tion and no electrical or optical adjustments are ever required. LED
indicators are provided for rapidly ascertaining equipment operating
status, and these units are provided in a rack-mount configuration
only.

▲

ORDERING INFORMATION

PAR T
NUMBER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

MULTIMODE

62.5/125µm**

1

1

1

1.2 miles (2 km)

28 miles (45 km)

34 miles (54 km)
43 miles (69 km)

OPTIONS

Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC’ to model number for SC Optical Connector (Singlemode fiber only)
Add ‘-FC’ to model number for FC Optical Connector (Singlemode fiber only)

VT71620-R3
VR71620-R3

VT71630-R3
VR71630-R3

VT71630HP-R3***
VT71630HP1-R3***
VR71630-R3

FIBERS

REQUIRED

10 dB

15 dB

18 dB
23 dB

DESCRIPTION

16 Channel Video Transmitter (1310/1550 nm)

16 Channel Video Receiver (1310/1550 nm)

16 Channel Video Transmitter (1310/1550 nm)

16 Channel Video Receiver (1310/1550 nm)

16 Channel Video Transmitter (1310/1550 nm)

16 Channel Video Transmitter (1310/1550 nm)

16 Channel Video Receiver (1310/1550 nm)

SINGLEMODE

9/125µm

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. *** Minimum optical loss of 6 dB required.

▲

NOTE: All optical terminations need to be epoxy polished with a minimum back reflection of -30dB.

V

16

.comwww.

Available at:

Available at:

• A & E Specifications, (CSI)

• AutoCAD Drawings

• Operation Manuals

• Technical Bulletins

09/09/04

SYSTEM DESIGN

VIDEO

Video Input: 1 volt pk-pk (75 ohms)
Input and Output Channels: 16
Bandwidth: 5 Hz - 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB @ Maximum Optical Loss Budget

OPTICAL EMITTER Laser Diode

WAVELENGTH 1310/1550 nm, Multimode or Singlemode

NUMBER OF FIBERS 1

LED INDICATORS VT Transmitter Unit

• Video Sync Presence for Each
Input Channel

• Operating Power

VR Receiver Unit:

• Video Sync Presence for Each
Output Channel on Receiver

• Video Sync Presence for Each
Input Channel on Transmitter.

• Optical Carrier Detect/ Link-Lock

• Operating Power

CONNECTORS

Optical: ST, SC or FC (see ordering information)
Video: BNC (Gold Plated Center-Pin)

ELECTRICAL & MECHANICAL

Power: 115/230 VAC
Number of Racks Slots: 7
Current Protection: Automatic Resettable Solid-State Current

Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Rack Mount:

19.0 x 7.0 x 5.3 in., 48.3 x 17.8 x 13.3 cm

Shipping Weight: < 9 lbs./5.4 kg

ENVIRONMENTAL

MTBF: > 100,000 hours
Operating Temp: 0° C to +70° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.

▲

NOTE: All optical terminations need to be epoxy

polished with a minimum back reflection of -30dB.

SPECIFICATIONS

TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]

16 Commerce Road

■ Newtown, CT 06470

Due to our continued effort to advance technology, product specifications are subject to change without notice.

TECHNICAL SPECIFICATION

16-CHANNEL DIGITAL VIDEO MULTIPLEXER

VT/VR71600-R3 SERIES

up to 28 miles

(45 km)

16 Video Inputs

(Coax)

VT71630 VR71630

16 Video Outputs (Coax)

to monitors or switches

1 Fiber

9/125µm SM

10 dB

15 dB

18 dB

23 dB

OPTICAL POWER BUDGET

FIBER

WAVELENGTH

TRANSMITTER

RECEIVER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

MODEL

MODEL

VT71620-R3

VT71630-R3

VT71630HP-R3***

VT71630HP1-R3***

Multimode

62.5/125µm

**

Singlemode

9/125µm

1310/1550 nm

1.2 miles (2 km)

28 miles (45 km)

34 miles (54 km)

43 miles (69 km)

VR71620-R3

VR71630-R3

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. *** Minimum optical loss of 6 dB required.

AGENCY COMPLIANCE

MADE IN THE USA

Federal Supply Schedule

Contract No. GS-07F-0049M

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J