Page 1
IFS 12-Channel Digitally Encoded Video
The IFS VT/VR71230DRDT-R3 video transmitter/data
transceiver and video receiver/data transceiver series
utilizes state-of-the-art 8-bit digital encoding and decoding
for high-quality video transmission that exceeds the
requirements of EIA RS-250C for Medium-Haul Video
Transmission. These environmentally hardened units provide
transmission of twelve independent video channels and two
bi-directional data channels over one single mode optical
fiber and are ideal for use in unconditioned roadside or
out-of-plant installations. Completely transparent to and
universally compatible with any NTSC, PAL, or SECAM CCTV
camera system, all standard pan-tilt-zoom control signals
including RS-232, RS-422, or 2 or 4-wire RS-485 with Tri-state
and Sensornet supported. Plug-and-play design ensures
ease of installation and no electrical or optical adjustments
are ever required. LED indicators are provided for rapidly
ascertaining equipment operating status, available in rackmount configuration only.
Application Examples
• High Performance CCTV with PTZ Control
• High Performance CCTV with Access Control
12-Channel
VT/VR71230-2DRDT-R3
and 2-Channel Data Multiplexer
Standard Features Overview
•
Real-Time Color Video Channels and 2 Bi-Directional Data
Channels on One Single Mode Fiber
•
Transmission: Extremely High Video Performance
•
Variation vs. Optical Path Loss
•
Layers where Video Degradation May be a Problem
•
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
• Directly Compatible with All NTSC, PAL, or SECAM CCTV
Camera Systems
• Robust Design Ensures Extremely High Reliability In
Unconditioned Out-of-Plant Environments
• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters
• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection
• Includes R3 Rack
• Comprehensive Lifetime Warranty
Digitally Encoded
Video and
2-Channel Data
Multiplexer
Utilizing state-of-the-art 8-bit
digital encoding and decoding for
high-quality video transmission.
Page 2
Specifications
up to 22 miles
(35 km)
Data
Communications
Data
Communications
12 Video Inputs
(Coax)
VT71230-2DRDT-R3 VR71230-2DRDT-R3
12 Video Outputs (Coax)
to monitors or switches
Control
Data
Control
Data
Remote
Panel
PTZ Control
Master
Controller
1 Fiber
9/125µm SM
Video
Video Input: 1 volt pk-pk (75 ohms)
Input/Output Channels: 12
Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB @ Maximum Optical Loss Budget
Data
Data Channels: 2
Data Format: RS-232, RS-422, 2 wire or 4 wire RS-485 with Tri-State, Manchester,
Bi-phase and Sensornet
Data Rate: DC - 100 kbps (NRZ)
Bit Error Rate: <1 in 10˚ @ Maximum Optical Loss Budget
Operating Mode: Simplex or Full-Duplex
Wavelength 1310/1510/1530 nm, Single Mode
Optical emitter Laser Diode
Number of fibers 1
Connectors
Optical: ST, SC or FC (see ordering information)
Data: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power: 115/230 VAC
Number of Rack Slots: 12
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Rack Mount: 19.0 x 7.0 x 5.3 in., 48.3 x 17.8 x 13.3 cm
Shipping Weight: < 12 lbs./5.4 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
Ordering Information
Part Number Optical Pwr. Budget Max. Distance*
Single Mode
9/125µm
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth.
VT71230-2DRDT-R3
VR71230-2DRDT-R3
Add ‘-C’ to Model Number for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC” to Model Number for SC Connector
Add ‘-FC’ to Model Number for FC Optical Connector
Description
12 Channel Video Transmitter/Multiplexer w/2 Bi-Directional Data Channels
12 Channel Video Receiver/Demultiplexer w/2 Bi-Directional Data Channels
Fibers Required
1
12 dB
22 miles (36 km)
Loading...