GE Security VR2100-R3-C Specsheet
VR2100 Series
IFS Dual Independent AM Video
Receiver with AGC
Overview
The IFS VR2100 series dual video receiver detects two
independent AM video signals in one module on two
independent multimode fiber optic cables. The module is
ideal for smaller CCTV installations and the rack mount
version can be used to double the fixed video capacity of
the R3 rack for up to 28 independent video channels per
card cage. The receiver utilizes automatic gain control
(AGC). The receiver is compatible with the IFS VT1101M,
VT1101M-AC, and VT1001 series transmitters. Plug-andplay design ensures ease of installation requiring no
electrical or optical adjustments. The receiver incorporates
power and AGC status indicating LED’s for monitoring
proper system operation. The module is available in either
stand-alone or rack mount version.
Application Examples
• CCTV (Fixed Video)
Standard Features
• AM Video
• NTSC, PAL, SECAM Compatible
• Automatic Resettable Fuses on all Power Lines
• Two Independent Receivers in One Module
• Can be Used to Double the Fixed Video Capacity of an R3
Card Cage
• Full Range Automatic Gain Control (AGC)
• Automatically Maximizes Contrast
• No In-field Electrical or Optical Adjustments Required
• Power and AGC Status Indicating LED’s to Monitor
System Performance
• Full Color Compatibility
• Hot-Swappable Rack Modules
• Comprehensive Lifetime Warranty
Dual Independent
AM Video Receiver
with AGC
Detects two independent AM video
signals on one module on two
multimode fiber optic cables.
Specifications
Video
(Coax)
Video
(Coax)
Video
(Coax)
Video
(Coax)
2 Fibers
62.5/125µm MM
VR2100VT1001
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
up to 2.5 miles
(4 km)
Video
Video Output: 1 volt pk-pk (AGC controlled)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >55 dB at 10 dB Attn.
Wavelength 850 nm, Multimode
Receiver Sensitivity 1 µw (-30 dBm)
Transmitter Output 25 µw (-16 dBm)
Number Of Fibers 2
Connectors
Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
ElectricaL & Mechanical
Power:
Surface Mount: 24 VAC C.T. @ 200 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 10.7 x 12.5 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
Ordering Information
Multimode
Part Number Optical Pwr. Budget Max. Distance*
VR2100
Description
Dual Video Receiver with AGC (850 nm)
62.5/125µm**
VR2100 Series is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters
Accessories♦
Options
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦
All accessories are third party manufactured.
Fibers Required
2 2.5 miles (4 km)
14 dB
Loading...