GE Security VR14130, VR14130-SC-R3, VR14130-SC, VR14130-R3, VR14130-FC-R3 Specsheet

GE

VT/VR14100 Series

Security

Overview

The IFS VT/VR14100 series video transmitter and video
receiver units utilize state-of-the-art 10-bit digital
encoding and decoding for true broadcast-quality video
transmission that exceeds the requirements of EIA RS-250C
for Short-Haul Video Transmission. These environmentally
hardened units provide transmission of video over one
single mode or multimode fiber optic cable and are ideal
for use in unconditioned road side or out-of-plant instal­lations. As the level of video performance is so high, the
VT/VR14100-series is ideally suited to networks employing
multiple physical layers where video degradation may be
a problem, such as FDM or digitally encoded video multi­plexing links, T-1 or fractional T-1 codecs, and SONET or
ATM backbones. These units are completely transparent to
and universally compatible with any NTSC, PAL, or SECAM
CCTV camera system. Plug-and-play design ensures ease
of installation and no electrical or optical adjustments
are ever required. LED indicators are provided for rapidly
ascertaining equipment operating status, and this
equipment is available in either stand-alone or rack
mount configurations.

Application Examples

IFS 10-Bit Digitally Encoded Video

Transmitter and Receiver

Standard Features

• State-of-the-Art 10-Bit Digitally Encoded Video
Transmission

• Exceeds All Requirements for RS-250C Short-Haul
Transmission: True Broadcast Video Performance

• Exceptionally Low Video Distortion with Zero Performance
Variation vs. Optical Path Loss

• Ideally Suited to Networks Requiring Multiple Physical
Layers Where Video Degradation May be a Problem

• Directly Compatible with All NTSC, PAL, or SECAM CCTV
Camera Systems

• LED Status Indicators Provide Rapid Indication of Critical
Operating Parameters

• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection

• Wide Optical Dynamic Range: Optical Attenuators are

Never Required

• Exceeds NEMA TS-1/TS-2 and Caltrans Traffic Signal
Control Equipment Environmental Specifications for
Operating Temperature, Shock, Vibration, Humidity, and
Voltage Transient Protection

• Robust Design Ensures Extremely High Reliability In
Unconditioned Roadside Environments

• Comprehensive Lifetime Warranty

• High Performance CCTV (Fixed Video)

Digitally Encoded
Video Transmitter
and Receiver

Utilizes 10-bit digital encoding and
decoding for true broadcast quality
video transmission.

Specifications

1 Fiber

9/125 m SM

Video

Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >67 dB @ Max. Optical Loss Budget

Wavelength 1310 nm, Multimode; 1550 nm, Single Mode

Optical Emitter Laser Diode (all models)

Receiver Sensitivity .5 µw (-33 dBm)

Number Of Fibers 1

LED Indicators VT: Video Input Sync Presence, Video Input Overload, Operating Power

VR: Video Output Sync Presence, Video Output Overload, Optical Carrier
Detect/Link-Lock, Operating Power

Connectors

Optical: ST, SC or FC (see ordering information)
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)

ElectricaL & Mechanical

Power:
Surface Mount: +12 VDC @ 500 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

Part Number

Multimode

62.5/125µm**

Single Mode
9/125µm

Accessories♦

Option

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.

VT14120
VR14120

VT14130
VR14130

VT14150
VR14150

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-SC’ to model number for SC Optical Connector (For Single Mode equipment only)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-HP’ to VT Model Number for 26 dB Single Mode Optical Power Budget
Add ‘-FC’ to model number for FC Optical Connector (For Single Mode equipment only)

Digitally Encoded Video Transmitter (1310 nm)
Digitally Encoded Video Receiver (1310 nm)

Digitally Encoded Video Transmitter (1310 nm)
Digitally Encoded Video Receiver (1310 nm)

Digitally Encoded Video Transmitter (1550 nm)
Digitally Encoded Video Receiver (1550 nm)

1

1

1

Optical Pwr. Budget Max. Distance*Description Fibers Required

10 dB

2A dB

27 dB

2 miles (3 km)

43 miles (69 km)

67 miles (108 km)